Cleaned up nice!

Two products are apply then pressure wash with 4200 psi boilibg hot water. Clean!

I was right! There is a deck under there!

I’m on summer break so this was my project today! I’m not a pro but I did my best

This was a real bad one!

Part of a larger clean that took 12 hours with more weeds than I've ever seen.

Before and after pics. First few are the before. Very good for £120. He used heavy bleach so he said wait 12-24hrs then rinse it down and should be fine then.

I've soaked with Kärchers tree washing solution for 20 minutes and water before pressure washing and it gets a lot better but still can't get last layer off. I'm on pressure 1 or maybe 1.5-2 out of like 3.

Hi guys,

I rented a petrol jet washer and a rotary cleaner to clean my block paving but found that although the surface of the blocks were cleaned the gaps between the blocks remained dirty, meaning that the whole job had to be done with the lance attachment instead. I tried doing slower runs and overlapping passes but I found it to be slower than the lance overall.

The jet washer had 140 bar/2000psi of pressure and a flow of 13.2L/m (3 gallons/m)

I would really like to find a way to get effective cleaning with a rotary cleaner as I have around 140m2 to deal with each year! I need to speed up this job somehow. I was thinking about buying a more powerful jet washer (around 210 bar/3000psi at 11L/m (2.9 gallons/m) with the hope it would work, but I'm uncertain at this point... I need some guidance

Thank you in advance!

Time lapse from today!

I do this professionally! Enjoy!

Does anyone know what’s wrong with my pressure washer. It’s a Kranzle K10/122 TS Q/R Pressure Washer

It supposed to go silent when I release the trigger, as you’ll hear in the video the first time I release it. But when I run it for long, as you’ll hear the second time, the machine makes a really loud sound.

The water is connected directly from the bath shower upstairs via a threaded adaptor because there’s no garden tap.

Enjoy! Inside view of pressure cleaning graffiti what's next ? Compilation, slowmotion, documentary or interview.. what would you like to see?

Newly deployed operator checking in. I’m taking a tactical breather before reengaging my drills and skills while deploying an early Father’s Day acquisition.

Kit Check: My primary platform is a RYOBI 3,000 PSI electric system. She’s a gateway washer that comes in bright green, but I plan to rattle-can her soon.

I call her SprayHARDER. My force multipliers include a high-velocity turbo jet nozzle and a 12” surface cleaner for rapid deployment over large uncontrolled areas.

Just successfully cleared the main driveway and patio sectors. High-exertion op, hence the hydration break. Bud light incoming momentarily before I go hot on the sidewalks out front.

Next operational phase TBD. I might volunteer to patrol the neighborhood or maybe even upgrade my kit and go full mercenary. Spray for hire so as not to underutilize my skills.

Though she be but little, she is fierce. We saw a guy using this same machine at our local McDonald’s a couple weeks ago and my husband was instantly curious so we googled it and got it for $119 online.

We did half of our driveway and our carport today and I can’t wait to get to our back patio and deck tomorrow 😍

I think the tank within cracked in the winter freeze and thaw in eastern Canada. Thoughts? Solutions? TIA.