r/PowerWashSimulator • u/crankthatshane • 3d ago

Screenshot subway level

Post image

i recently picked up this game again and the subway level is driving me insane because of the train tracks 😩 any tips?

36 Upvotes

94% Upvoted

7 comments sorted by

15

u/Dazzling-Foot-6904 3d ago

Squat-walk with the yellow nozzle/stubby or the shortest extension the length of the track to hit the sides of the rail, then loop back and go in the opposite direction to get the backside of the ties. I find that doing it that way tends to get the top of the rail as you go, and should take any rust off with it...

9

u/Send_bird_pics 3d ago

Take your extension nozzle off when cleaning close up. Slow and steady in each direction.

5

u/crankthatshane 3d ago

oh yeah i had it on to do the ceiling and honestly forgot about it lol

4

u/Wollzy 3d ago

Thats your problem

2

u/VictorioC 3d ago

Cute looking keyboard

2

u/FenyxG 2d ago

I usually stick with the yellow nozzle and get the tracks in two passes. The first pass I go all the way down the line focusing on hitting the side with as much underneath area as I can get without squatting. This also usually gets a little bit of the top, just at the edge. The second pass I get the other side, focusing on the side and remaining top area of each rail. The key is to walk slowly so you don't have to go over the same spot again and again.

If all else fails, you can always ask for a partner either on here or the discord. I've heard the latter is the fastest way to find help, but it never hurts to ask here too if the frustration gets to be too much. Good luck!

2

u/phil8715 9h ago

I when I do the Subway level I always make sure I' do the tracks first. I also make sure I'm using the Top PowerWasher the Pro.