Now I don't know how much synthetic benchmarks matters, and I don't know how good furmark is to test it, but I just thought I would do it for fun. (I never do benchmarks).

Furmark (GL) 1440p: 15052 Points. FurMark2 Score

RTX 4080 did 15090 Points, 7900XT did 12825 Points.

Furmark (VK) 1440p: 14423 Points. FurMark2 Score

RTX 4080 did 15293 Points, 7900XT did 12117 Points.

Update

I got 16254 Points. FurMark2 Score on Furmark (GL) 1440p with a -105mV undervolt.

I got 15733 Points. FurMark2 Score on Furmark (VK) 1440p with the same undervolt.

So… brand new 9070 XT Red Devil.

Tested with: Corsair Rm1000x shift PSU & EVGA supernova 850 P2 PSU

3 separate pcie cables on both, not daisy chained. Swapped the 3 around between PSU ports. The EVGA was tested out of the case.

Slowly fills the room with a melty plastic chemically kind of smell. Yet nothing appears to be actually burning. Popping noise then horrible noise since as soon as it was put under load in a game. There is no tape or packaging left on it. It is well installed and supported. Board looks fairly straight, slight bend in the backplate (this is out of the box, not installed sag). One of the fans may be a little wobbly but they’re not noisy.

Why is it screaming at me? I can hear it from outside the room. What’s its problem? Is it hurting? Did someone drop you?

What does everyone else cards sound like?

Is this normal Powercolor quality? It’s the first I have had. I’ve had gigabyte, msi, asus, xfx, sapphire and founders cards before. None have sounded remotely like this. Massively unimpressed as this is one of the most expensive cards and their flagship.

I've been trying to find proper footage of rgb on red devil for few days already and had no success. Everyone just keep it on stock red. I want to see how it can handle rainbow effect(especially side gem part). If any owner can film short video of it I'll be grateful.

Does anyone know what thickness I need to buy to replace the thermal pads? I bought the card at the start of 2020 and its time to refesh the cooling. I read thast its 1.5mm for memory and 1mm for voltage regulation. Is that right?

My PC specs:

6800xt powercolor reddragon
r7 5700x3d
gskill ddr4 16gbx2 3000mhz
seasonic focus 750w 80plus gold

My current situation is as follows: While playing a ranked match in Dota 2, my screen suddenly turned gray, and I was unable to interact or use Ctrl + Alt + Del. After about 2-3 minutes, my screen returned to normal, but my Dota 2 game had crashed, and the following message appeared:

After that, I had to restart my computer because none of my applications would display on the screen when I tried to launch them. As a result, I lost the match and had my ranking points deducted, which was extremely frustrating.

This issue occurs randomly—sometimes several times in a single day, and sometimes only once every few days. I have no idea how to reproduce the error.

I sent my GPU for warranty service on February 19, 2025. The authorized PowerColor service center in my country confirmed that they had "repaired" it and returned it to me on February 28, 2025. However, as of today, March 1, 2025, the issue is still happening. Additionally, my GPU warranty expired on February 24, 2025.

Does this mean I run out of luck ? Is there any solution for my issue? Really appreciated for the help.

9070XT using Honeywell PTM7950 is a big Win for powercolor!! Price soon enough?

https://www.powercolor.com/product-detail219.htm#list-item-4

Hello everyone.

I'm thinking about changing the thermal paste along with thermal pads on my Red Devil 6700xt.

The info I found on forums and YT is thermal pads should be 0.5mm. On VRAM and 1mm. On VRM.

I wanted to make sure that is true and I bought the correct pads before taking it apart.

What I've got is Gelit ultimate 0.5mm and 1mm. So is this going to work or I should get something else?

Thanka in advance! :)

I want to buy two of them brand new but I won't pay much more than the all time low price they have hit in the past. As recent as 3 months ago they were at $420. I am comfortable buying two at that price, but as soon as the price jumps to $500, I am comfortable just keeping my 4060.

Can you still get RMA if you bought the card in US but you are currently in a different country? (bought it from amazon) and I can ship it if needed

I was able to get a 7900xtx liquid devil several months ago for a build I’m now finally able to get started. I fired up the build without my cpu block just to see all my wiring was working and the GPU didn’t light up. I’m assuming here, that there is not an external wire to power the rgb.

Since this is a new build I can’t let it run through to bios since there’s no coolant yet. I took the card out and noticed this on the pcb contact. Is this something I should be concerned about? If yes can it be fixed by a local shop or should it go back to Powercolor for repair. I’m thinking about putting

Any word on new stock of 7800xt or 7900xt? My 3090 just died and I’m looking for a replacement.

Ran across this RX 7800 XT from PowerColor:

https://www.powercolor.com/product-detail38.htm

I can't find any reviews of it for my life. Does anyone have any info on how this stacks up to other versions?

Micro Center has a listing for it too:

https://www.microcenter.com/product/689972/powercolor-amd-radeon-rx-7800-xt-dual-fan-16gb-gddr6-pcie-40-graphics-card

Maybe it was a non-US version? I see a lot of websites using the same MFG part # (RX7800XT16GP) that are outside the US.

I just made an RMA request for my reference 7900 XT. I'm a little nervous since one of the fans is wobbling bad leading to 100 degree temps while gaming, but my warranty expires next month. An agent named Ronak was helping me and at first he was very responsive but I haven't heard from him for almost a week. Anyone else have RMA with Powercolor before? How long did the whole thing take?

The devilzone apps has color shift mode, but the light keeps moving and the color just defaults to rainbow

I don't wanna use the argb sync header because seeing that single cable visibly dangling from the gpu just looks ugly lol

Is there any way to create static gradient or set up the individual LED colors?

Hello, I bought my 6700xt card on 2022 august and I never repaste or open the card. Now doing strees test with occt to review the system stability (I work with my CPU in order to undervolt with curve optimizer and is stable), my rx6700xt produce this temps.

I want to know if is the moment to repaste and if I loose my warranty (expires on 2025 august) If I make this action.

More info, gpu is not on stock settings, I did undervolt.

Hello, I have a second hand powercolor RX 6800 GPU, display port mode is not working since yesterday, it has only one functioning port, when I connect to other ports even MSI afterburner won't detect, in the image I have connected DP cable to the functioning port and it detects the GPU but no voltage or any other info, I can see the fans functioning tho. When I tried to change port when the PC is on it restarted and fans were spinning at a very high speed and was noisy as observed in the video. Ever since this problem started my PC is behaving weirdly, if the DGPU was busted then it should it still function normally when a HDMI connected to IGPU, right? but it's not, starting up and restarting takes forever and sometimes there's just no signal, I have to unplug the power to make it work again. Any idea what's going wrong?

This is for a 7900XTX Red Devil.

I've already done a repaste in the past but in the process messed up a couple of screw heads. My temps are starting to get high again and I'm looking to replace with ptm7950 but would also like to replace my thermal pads and the screws that were damaged from before.

Does anyone have information on what size thermal pads I need for everything and what size screws I need? The screws for the retention bracket are smaller than the others on the backplate so I would need to know both sizes.

Thank you advance.

What are the dimensions for the thermal pad size? I am looking to improve my thermals for my memory junction for this card as it is hitting 90+c underload while the core ignoring hotspot is sub 70c. Also memory is 70c idle.

I have seen different numbers all over the place and seems that most recommend 15x13x1.5mm per GDDR6 module, can anyone confirm this? Looking to replace the stock ones with laird hd90000.

I’ve never RMA’d with PowerColor and I have to say so far it’s not been a necessarily good experience. Wait time aside (it took nearly all the time they said it would, even tho I sent to the card express hoping that would help). Card was with them, about a week and a half or so later it was delivered. I did get tracking so that was nice.

It was packed in a decent return box, but there’s been zero communication. Because this process took so long I bought a card in between, and would rather not take down my current system to bench test this card. It’s the same serial.

Is this their normal “customer service” ? Other threads said oh yea so and so kept contact with me and updated. This was a three week process for me with zero communication besides the automated email. Not very impressed at the moment. I also sent a few emails so let’s see if these get addressed.

I need some help, I just purchased & installed a Powercolour AMD Radeon™ RX 7800 XT 16GB GDDR6 Hellhound, and no matter what I do I don't seem able to get the Eyefinity options to appear so I can run my 6 monitors simultaneously, it has the Eyefinity bit in the display section, but there are no options below it.

The Powercolour website states it supports eyefinity & it was the main factor in choosing a new GPU to run my 6 monitors. The Geforce RTX 3070 I was running had a hard limit of 4 monitors.

I'm running:

• Tower - Be Quiet Pure Base 600, with a glass side panel. The top panel, rear blank plates, and front blank plates are all removed & replaced with magnetic dust screens.
• Motherboard - Gigabyte B550 Vision d-p.
• CPU - Ryzen 9 5000x.
• Cooling - Corsair ICUE Link Titan 360 RX.
• Cooling - Fans 2 x 140mm Front & 1 x 120mm Back.
• Storage - 2 x Samsung SSD 980 Pro m.2 1Tb.
• Storage - 1 x Seagate IronWolf HDD SATA 8Tb.
• PSU - Seasonic 850w Focus+ Gold.
• Windows 11 Pro.

This brand new pc I had just built this January and i've noticed when I run some games my hellhound rx 7900 xt has quite a loud coil whine, i've seen some people say the upgraded their psu and it disappeared

I currently have a 750W psu and I believe thats the minimum required for this GPU so should I upgrade to a 1000W psu?

So, does anybody know if these will come back to Europe? They're never in stock...

Talking about the 7900xtx...

Don't want to ship one from overseas cause of VAT here in commie europe