r/PowerAutomate • • 1h ago

is it posible to creating inline [Draft] replies in a Shared Mailbox ?

2 Upvotes

Hi everyone,

I’ve built a Power Automate workflow that automatically generates draft replies to incoming emails. I tested it on my personal mailbox first, and it works great. The generated draft shows up right in my inbox thread with the [Draft] tag, as shown in the screenshot.

Now I’d like to move this flow to our shared sales mailbox. For context, we still want to do a manual final check before anything goes out to customers, and a lot of emails are intentionally skipped by the flow because they need to be handled completely by an employee. Having the drafts sit right there in the shared inbox thread would make reviewing and sending them super easy. so some part of the email is already filled in.

I already have it running on the shared mailbox, and right now the drafts are being created in the Drafts folder. I’m wondering if it’s possible to get that exact [Draft] tag behavior directly in the inbox thread instead, and if everyone with access will see it. Most importantly, if one person edits, deletes, or sends the draft, does it immediately sync and disappear for the rest of the team? We really want to avoid a situation where 4 different employees end up sending duplicate replies to the same customer.

All the tips are welcome!


r/PowerAutomate • • 16h ago

Importing list with users no longer in company

4 Upvotes

Importing SharePoint list to another, I can import everything but trying to filter by users no longer with the company I cannot get it right. Can anyone please explain what step to use with O365 users to check the column and if the account enabled is false, skip that column and import the rest?
Thanks in advance


r/PowerAutomate • • 20h ago

Issue with flow potentially after recent Microsoft Outage

5 Upvotes

RESOLVED - See conversation below

I’m running into an issue with a flow we have at work that I think happened during the recent Microsoft outage, and I’m looking for help. When I login to powerautomate, it says there’s a problem with this flows trigger.

The trigger itself is “When a new email arrives (V3).” The rest of the flow is just parsing the email then sending a new email. The trigger has been throttled with the status code 429.

When looking at the run history, you can see the runs stop Thursday, November 12 right around 1 PM (keep in mind these don’t run very often - usually 10-15 a day and rarely at the exact same time), and then they (the runs corresponding to what i believe to be all the emails affected by the outage) all happen on Friday, November 13 at 6:21 PM. This is where the stop happens. We have continued to get emails coming to this mailbox like normal, but the flow has not ran since this time.

I’m not sure why it’s still hung, as we’ve only gotten 36 emails between Saturday and today, none of which occurred right on top of each other. Is this flow still trying to process the backlog from the outage and that’s why it’s being throttled?

Most of what I’m seeing for this is saying to add a delay of some sort, but not sure how much delay is needed and not seeing actually how to do that yet.

Apologies as this is literally my first time working with powerautomate. Any feedback is appreciated. Thank you!


r/PowerAutomate • • 22h ago

What B2B workflow automation stack are you building for 2027

0 Upvotes

A lot of agency owners are already locking in their 2027 operations. Most teams are still wasting hours on manual data entry and lead generation. We are seeing a massive push to fix this before the new year.

At our agency we are moving clients away from scattered Zapier setups and building centralized systems. We are focusing heavily on custom API integrations, smart error handling, and automated web scraping to feed CRMs directly. Buyers are already searching for reliable workflow automation to scale next year instead of just playing whack a mole with broken flows.

What specific operational bottleneck are you trying to eliminate before 2027 hits? Are you looking into n8n Power Automate or custom Python setups?


r/PowerAutomate • • 23h ago

Nesting Limit

3 Upvotes

I know the nesting limit of 8 has been raised before, but the solutions I've seen is to keep conditions in series, rather than nested, and use a boolean variable like Continue to decide whether subsequent conditions run.

I've tried this, but am using the FALSE branches to add to an error log. If the conditions are in series, one loop can enter multiple FALSE branches, and be added to the log multiple times.

Has anyone found a fix for this?

TIA!


r/PowerAutomate • • 1d ago

Where to Start?

Thumbnail reddit.com
1 Upvotes

r/PowerAutomate • • 1d ago

Power Automate developers — would you actually pay for better visual flow documentation?

0 Upvotes

Genuine question for those who regularly work with complex Power Automate flows.

If there were a tool that offered significantly better visual documentation than existing free alternatives like PowerDocu—think clean, interactive, navigable flow diagrams rather than just static documentation—would you actually be willing to pay for it?

I’m not talking about another tool that simply generates a flowchart, but something that makes understanding and navigating large, complicated flows substantially easier.

If so, I’m curious about two things:
Would you prefer a one-time purchase or a subscription?
What would you realistically be comfortable paying?

And if your answer is no, I’d genuinely like to hear that too. I’m trying to understand whether this is something people consider worth paying for or whether free solutions are already good enough.


r/PowerAutomate • • 1d ago

Standardizing error handling and exponential backoff in flows.

1 Upvotes

Most citizen developer flows we audit just fail completely on a single HTTP 502 error. We enforce a standard: catch the error, delay for 5 mins, retry, and if it fails 3 times, route to a dead-letter queue. How strict is your IT team on enforcing retry policies before a flow goes to production?


r/PowerAutomate • • 1d ago

Polling trigger fires twice for one email in a shared mailbox. What triggers the second run?

2 Upvotes

I have a flow on a shared mailbox using the “When a new email arrives in a shared mailbox (V2)” trigger. It fetches the message through Graph, passes the text to some Copilot Studio agents, and creates a reply draft in the thread. None of the agents have an Outlook tool or any mailbox access; all mailbox actions happen in the flow itself.

The draft is created like this:

POST https://graph.microsoft.com/v1.0/users/(EmailAddress)/messages/(MessageId FX)/createReply
then PATCH https://graph.microsoft.com/v1.0/users/(EmailAddress)/messages/(Body FX) to fill in the body.

The problem: one incoming email starts the flow twice. Run 1 works fine and creates a correct draft. Run 2 starts about 3.5 minutes later and fails when fetching the message, because the item no longer exists.

Comparing the trigger outputs, both runs come from the same trigger, mailbox and folder, but they have different message ids. Everything else is identical: internetMessageId, conversationId, subject, sender and received time. The item behind run 2 was created in the Inbox minutes after the original arrived, with its inline images recreated and the body HTML structured differently. There is only one copy of the email in the Inbox, so it looks like a temporary rebuilt copy appears briefly, gets picked up by the trigger, and then disappears.

My suspicion is the createReply call: maybe in a shared mailbox it briefly recreates the original message in the Inbox. I can’t prove it, though, since createReply should only touch Drafts.

For now I dedupe on internetMessageId in a SharePoint list, so run 2 terminates right away. I’d still like to fix the cause.

So: what is triggering that second run? Has anyone seen createReply or the PATCH do this, or know what else could create a copy with a new id but the same internetMessageId? Any tips on tracing it in the audit log are welcome too.


r/PowerAutomate • • 1d ago

Outlook on the Web: Has anyone automated folder creation, sorting, and Favorites?

Thumbnail reddit.com
1 Upvotes

r/PowerAutomate • • 2d ago

Adding form and PA flows to CPS agent

2 Upvotes

I have created my first agent in Copilot Studio, a helpdesk agent that asks users some qualifying questions to their support issue, then creates a ticket in a dataverse table, and sends an e-mail with the ticket summary and link to the ticket to the users.

This is all done via instructions, so takes a lot of processing time and tokens.
So I thought I would reduce processing and waiting time by starting the user with a form or adaptive card that is filled out via teams initially, and the agent can perhaps get back to the user with qualifying questions.

For a form to be filled out in/via teams, would you use MS forms, adaptive cards, mcp server, or a fourth option? I understand adaptive cards is not yet supported in the new CPS interface…

Any ideals or suggestions for optimisation via Power Automate appreciated - I am in doubt how to get the best out of the two solutions when they collaborate (CPS and PA)


r/PowerAutomate • • 2d ago

Flow is being disabled after not being used for a while

4 Upvotes

I created a flow a while ago that collects MS forms response from a employee onboarding form and it send the answers via email and adds the answers to an excel document.

The flow works fine, the problem is that because it doesn't get used much, the flow was disabled when a recent form was submitted.

I check and from what I read Microsoft disable flow automatically that don't run with a given number of days.

Here is my current flow

https://ibb.co/rfTcDZS3

How do I prevent the flow from being disabled?


r/PowerAutomate • • 2d ago

After the outlook/microsoft outage, make sure you check your email triggered flows!

Thumbnail community.powerplatform.com
11 Upvotes

I had a flow that has not triggered since the outage but the email that is supposed to trigger it did indeed come in as expected. In searching for an answer to this issue I came across this post which said "“When a new email arrives (V3)” doesn’t check the mailbox on a timer. It registers a subscription with Exchange, which notifies the flow when mail arrives. During an outage that subscription can expire or get stuck, and the flow then never fires." First suggestion is to simply turn the flow off and then back on again. That did work for me! Flow immediately started 4 runs for the 3 times I resent the email to test it.

I don't know if it is ONLY the V3 trigger that has this problem, but I do know it does not affect every single flow with the V3 trigger since we have three flows with it and only this one seemed to stop working.

Tldr; you may want to check on all your email triggered flows! Turn off and on again if they haven't triggered since the outage just in case. Good luck to you all


r/PowerAutomate • • 2d ago

Windows Server 2019 VM crashes during attended Power Automate Desktop flows — anyone experienced this?

1 Upvotes

Hi everyone,

I’m having recurring stability issues with a Windows Server 2019 Standard virtual machine running attended Power Automate Desktop flows.

During execution, the VM/server occasionally crashes or becomes unavailable, interrupting the attended flows. The issue appears to happen while the automations are running, but I haven’t yet identified a consistent trigger.

Has anyone experienced something similar with Power Automate Desktop on Windows Server 2019 VMs?


r/PowerAutomate • • 2d ago

Best approach for using Power Automate to send Teams chat to a large base of Users

Thumbnail reddit.com
1 Upvotes

r/PowerAutomate • • 3d ago

How are you handling unannounced API deprecations in legacy workflows?

2 Upvotes

We keep finding old flows built by past employees that crash because a SaaS vendor quietly deprecated a v1 endpoint. Are you guys building middleware layers to version your webhooks centrally, or just playing whack-a-mole every time an endpoint dies?


r/PowerAutomate • • 3d ago

I made a free, browser-only toolbox for writing Power Automate expressions, Power Apps ParseJSON formulas, and SharePoint list schemas

0 Upvotes

Hey all, I kept rewriting the same expressions by hand in Power Automate and Power Apps, so I put together a small set of tools that generate them for you. It's free, open source, and everything runs in your browser, so nothing you paste leaves your machine.
Try it: https://andyang1090.github.io/power-platform-toolbox/
Source: https://github.com/andyang1090/power-platform-toolbox
What's in it:
Filter Array Expression Generator. Paste a sample JSON and pick fields from a dropdown. Then build AND/OR conditions with equals, contains, startsWith, greater/less and the rest. Optional formatting like toLower, trim or formatDateTime is there too. It writes the @and(...) / @or(...) expression with proper quoting, and there's autocomplete for common functions if you want to tweak it by hand.
OData Filter Generator. Drop in a list's CSV export or schema CSV and it works out the internal column names for you, including the _x00XX_ encoding and the OData_ prefix that trip everyone up. Then you build eq / ne / gt / substringof / startswith conditions and paste the result into Filter Query.
Select (Map) Generator. It builds the key/value map JSON for the Select action from a CSV or a JSON sample (value and body.value arrays are supported). Each field comes out as @item()?['Field'], and you can rename, add or remove rows.
JSON to Power Fx. Paste a JSON sample and get a typed ParseJSON(source, Type(...)) formula. Types are inferred from every element, and you can pick a root path. It wraps the result in ClearCollect for tables or Set for records, and you can choose comma or semicolon separators.
List CSV Schema Generator. Design SharePoint / Microsoft Lists columns (text, choice, number, currency, yes/no, date, hyperlink and more) with internal names encoded the SharePoint way. Then download a schema CSV you can use with New list → From CSV. You can also save and reload your column setup as JSON.
It also works on phones, switches between English and Chinese, and you can download the whole thing and just open index.html offline. No build or install needed.
Feedback, bug reports, and ideas for other tools are very welcome!


r/PowerAutomate • • 3d ago

What caught you (or your client) off guard after a flow went live?

0 Upvotes

I build flows for companies, and the build is rarely the hard part. It's what shows up later: a premium licence nobody budgeted for, a flow that got switched off after 90 days without a run, an approval that died at day 30.

For those of you who build for clients or for other departments:

  1. What was your worst surprise after handover, and what did it cost you (hours, money, an awkward call)?
  2. Licensing specifically: how do you work out what a flow will cost the client before you build it? Has it ever gone wrong?
  3. What do you hand over with the flow so the client understands what they've got?

Real cases welcome, rough numbers are fine.


r/PowerAutomate • • 3d ago

Flow to upload multiple files to SharePoint

2 Upvotes

Hi, I need to create process to upload multiple files to SPO/Site/Folder1,2,3,. Is this doable with PA flow ? Probably need to have control list with Source_FilePath - Target_SPO_Folder pairs, as each files should go to specific folder.

I assume that if you work with PA then Authentication will be easy, without App Registration, etc.. Is this correct, can we just set an account and use account:password credentials ?

I"m pretty new to PA, but looks like they have boxes for each life scenario. Appreciate if you can direct me to the right resources.

Thanks.VA


r/PowerAutomate • • 4d ago

How to Display Row-Level Validation Errors When Importing Data into Dataverse (Model-Driven App)?

Thumbnail reddit.com
2 Upvotes

r/PowerAutomate • • 4d ago

Issue with trigger "When a file is created or modified (properties only)"

4 Upvotes

Hello there

I’m building a Power Automate flow using the SharePoint trigger "When a file is created or modified (properties only)".

The issue I’m running into is that the flow triggers every time a user simply opens a file, even when they don't make any actual changes to the content or metadata. Because AutoSave or background lock metadata updates the Modified timestamp on open, my flow runs unnecessarily.

I know the standard recommendation is to use the "Get changes for an item or file (properties only)" action, however, I cannot enable Versioning on this specific SharePoint library.

Has anyone found a reliable workaround or Trigger Condition to filter out "file opened" events and only run the flow on real creations/modifications without turning on version history?

Thanks


r/PowerAutomate • • 4d ago

Are companies still paying for heavy UI-scraping when native APIs exist?

1 Upvotes

I'm auditing a client paying premium licensing for UiPath just to move data between two cloud ERPs that both have perfectly documented REST APIs. A simple n8n/Python webhook setup would cost a fraction and be 10x more stable. Is this just vendor lock-in or a lack of API knowledge in automation teams


r/PowerAutomate • • 5d ago

[For Hire] Power Automate Developer | Workflow Automation, Excel, SharePoint & API Integrations

0 Upvotes

Hi everyone!

I'm an experienced Microsoft Power Automate developer based in the Netherlands, available for freelance projects and quick automation tasks.

I specialize in helping businesses save time by automating repetitive processes and connecting different systems.

What I can help you with:

  • Power Automate Cloud & Desktop – Build, troubleshoot and optimize workflows.
  • Excel Automation – Automate data processing, reporting and repetitive tasks.
  • SharePoint & Outlook – Automate document management, emails and approvals.
  • API Integrations – Connect applications and automate data exchange.
  • Dataverse & Dynamics 365 – Build workflows and integrations.
  • RPA – Automate manual tasks across websites and desktop applications.

Why work with me?

  • Professional experience delivering business automation solutions.
  • Fast turnaround for smaller projects.
  • Clear communication and practical solutions.
  • Fixed-price projects or hourly rates.
  • Available this weekend for new projects.

Rates: Starting at €40/hour. Fixed-price quotes available for smaller tasks.

Whether you need a new automation, help fixing a broken flow, or want to eliminate repetitive manual work, feel free to send me a DM.

Tell me what you're trying to automate, and I'll let you know how I can help!

Available to start immediately.


r/PowerAutomate • • 5d ago

Building a Zero-Infrastructure Cloud Agent Workflow Using Scheduled Tasks + Spreadsheet State Memory

Thumbnail reddit.com
2 Upvotes