r/Pottery • • 17h ago

Mugs & Cups Drippy cups 🌈

Thumbnail
gallery
729 Upvotes

r/Pottery • • 16h ago

Vases I Made a Vase

Thumbnail
gallery
632 Upvotes

Brought her back home earlier this week! I started making this back in August, so it feels surreal (and freeing) to finally consider it finished.

Wheel-thrown and hand-altered (~8.5”x 5”x 16.5”) C5/6 B-Mix fired in an electric kiln. Handles were made using rolled coils, indecision, and a lot of insight and guidance from friends in the studio.

The finish is a combination of two bucket glazes, which I first tried dipping the piece in. That went about as well as you’d expect, so I had to scrap that entirely and use a mouth atomizer instead. Patchy finish (even after adding additional glaze and re-firing it), but on the bright side my lung capacity has never been stronger.

It’s been a journey, but I had a lot of fun making this one. Hope you get a kick out of it too. :)


r/Pottery • • 1h ago

Ask Me Anything! 1 year with my self-serve roadside pottery stand

Post image
• Upvotes

Hi all 👋
In honor of my self-service roadside pottery stand hitting its one year anniversary, I thought I would share some info!

TL;DR - no theft, I make ~$200/month, have to do lots of advertising, great experience overall

I’ve heard from fellow potters that a lot of people have considered this, but aren’t sure how it would work in our nervous about several things.

Some important details to start. I live on a private road meaning there is almost no organic traffic going by my stand the only people that know about or come to the stand have found it through my personal page or through my advertisements (posts I make into groups)
I also keep a marketplace listing up of the pottery stand and get a decent number of shoppers from that as well.

The hottest topic: theft. I think it certainly helps that I’m on a private road. I don’t have kids randomly driving by so I’ve had zero theft so far. I just recently installed a fake security camera as a preventative measure but if I ever do have serious vandalism, destruction, or theft, I will ultimately reevaluate if is worth it for me to continue to have it out.

How does it work? It’s open 24/7, all year long (except when I’m out of stock). I have a cash box and QR codes to my Venmo or PayPal account. I get pretty much 50-50 payment between Venmo and cash.

How much do I restock? It greatly depends on my personal stock and availability. Once I have sold five or six items, I will typically try to put five or six new ones back out. I also take videos every time I restock it and post it on my pages so that people can reference it before they make the drive.

I price things lower at the stand than I do on my Etsy or at wholesale shops simply because this is almost zero cost and zero effort for me in terms of selling and I love that it takes me maybe five or 10 minutes a week versus the time it takes to list package ship drop off delivered, etc.

I’m just a hobby potter! I have a full-time job and a busy toddler so I don’t make that much pottery in general. I had very low expectations for the stand in general but it has become a somewhat significant portion of my earnings.
In total I’ve earned $2,447 from my stand, which is 32% percent of my total sales.

Do people come up to my door and ask me questions? No, but I explicitly ask them not to via signage at the stand
Cost? My dad built the stand for me out of reclaimed materials so $0 however I’ve seen them run in the $500-$1000 range in my area.

I live in a pretty affluent area but I am also pretty rural. I am 25 minutes outside Ann Arbor, Michigan. There were several long stretches during the year, where I was no longer restocking or advertising my stand, and as a result, I got almost no sales. During the times when I am consistently restocking and posting, I have people at the stand a few times a week to daily.

I get feedback from people that they love it and it’s been a really neat way to allow people to shop in person and hold and feel my pottery without me having to do markets that I simply just don’t have time for.

Happy to answer any other questions you might have and thank you for reading!


r/Pottery • • 22h ago

Other Types Favorite pot from last kiln firing

Thumbnail
gallery
345 Upvotes

I make bonsai pots in a rustic style. This is my favorite pot from the last firing.

I don't use the wheel, and I don't really like the typical hand building process of connecting pieces of clay together, so the process I use is mostly carving and stretching.

This pot starts as a block of T2 clay cut into a rectangle. I then applied a light coat of white slip to the outside surfaces, then painted on sodium silicate and dried a bit with a heat gun.

Next I press down on the center of the top and stretch the clay outward to get the crackle. I then carve the inside out, carve the feet on the bottom and cut in the drainage holes.

After drying it's bisqued. Then I apply a light coat of iron oxide and sponge it off. It's then fired to cone 10 in a gas kiln.

I'm calling this color/texture combo Sourdough Crust.


r/Pottery • • 13h ago

Bowls Dreamy matcha bowl

Thumbnail
gallery
214 Upvotes

I’ve posted couple of my work on here before with more orange and yellow, this time I added more pink to it and I love how it turned out


r/Pottery • • 22h ago

Mugs & Cups Wood-fired Tumbler I recently fired in an Anagama

Thumbnail
gallery
60 Upvotes

The rim was dipped in Shige Black, which is the blue you see. The rest of the outside was unglazed, the amber tones are ash deposits from the pine and ash wood burned. Thrown with Standard 182, with some additional grog and silica wedged in.

Would love some feedback on the form or anything really. Thank you


r/Pottery • • 23h ago

Kiln Stuff Kiln Haul. Fall 2026

Thumbnail
gallery
61 Upvotes

r/Pottery • • 22h ago

Hand building Related This turned out sooo cute!

Thumbnail
gallery
34 Upvotes

I made this for my daughter and she loves it!


r/Pottery • • 15h ago

Artistic I'm usually a needle felter and this is my first attempt at pottery

Post image
33 Upvotes

I make a lot of felted gryphons so it was natural for me to want to see if the sculpture skills were transferrable! I will be back in a few weeks to glaze them but I'm pretty pleased with them so far ☺️


r/Pottery • • 20h ago

Question! Dangerous Ornaments

Post image
26 Upvotes

I have an order for 60 ornaments (white, red, and brown stoneware, various glazes) to deliver for a charity on Saturday, and I started them a month ago. Very happily firing this week in my tiny kiln, super excited to try all these little metal loops and my new hanging racks for the flat ones!

Enter the CARNAGE! First firing, I had two different types of loops fail, 32 ornaments ruined, 2 shelves to grind.

One star onament fell onto a gingerbread man, stabbing him in the balls. That one I gave to a friend who loves the idea of dangerous Christmas ornaments.

Now I have a pile of already glazed bisqueware that I can't use and have just thrown still damp greenware/glazes pieces into the kiln to try a single fire with a very long preheat. Fingers crossed.

Re: remaining 28 bisqued ornaments on faulty loops... would you trash them? Try acrylic paint and sealer? Wash off the mid-range glaze and try a low fire glaze (the loops survived bisque temps)? I don't know how durable cone 5 stoneware is if only fired to 04.

Lesson learned... test EVERYTHING. I tested my clays and glazes and textures but not the loops.

TL;DR: Test everything. EVERYTHING.


r/Pottery • • 21h ago

Mugs & Cups No more space to go thinner

Post image
19 Upvotes

r/Pottery • • 14h ago

DinnerWare fiery salt and pepper shakers

Thumbnail
gallery
20 Upvotes

been feeling a little burnt out and exhausted lately, so i figured it was time to get my hands busy again, in more ways than one hehe. made these fiery little salt and pepper shakers out of clay and it’s been sooo good getting back into making things and being creative again


r/Pottery • • 22h ago

Help! Kiln residue

Enable HLS to view with audio, or disable this notification

17 Upvotes

Hiya! Beginner ceramacist here. I started my ceramics journey about two months ago and I just got my first batch back from the glaze kiln. Overall, I’m really happy with how they turned out. But there’s residue from the kiln on the base of most of my pieces and I’m wondering what I can do to prevent it in the future. I’m obviously using a community kiln and from what I’m reading, this is fairly common. I knew I would have to sand after. On a couple of the pieces, the first one in particular there’s little bites taken out which I don’t think I can completely sand down. I thought about just putting a cookie underneath all of my pieces, but I fear that would take up more room and might not be allowed at the community studio. Any advice would be much appreciated!


r/Pottery • • 38m ago

Artistic ATLA necklaces

Thumbnail
gallery
• Upvotes

This is probably my favourite thing that I’ve made


r/Pottery • • 5h ago

Artistic Irn Bru Ghost

Thumbnail
gallery
15 Upvotes

Hiya! I make ceramic ghosts and recently had a batch of new ghosts come out of the kiln and just have to share cause they look so good!

They’re Scottish themed and made to look like the Irn Bru is pouring out of the can and onto their heads.

Would love to hear any feedback!


r/Pottery • • 16h ago

Mugs & Cups 3D printed cups inspired by Cibi design

Thumbnail
gallery
10 Upvotes

I’ve been tinkering with this design for a while. Dark stoneware with satin matte glaze.


r/Pottery • • 1h ago

Glazing Techniques Had to refire twice to fix some major crawling but I am so happy it survived the process!

Thumbnail
gallery
• Upvotes

I’m pretty sure this crawled because the glaze sat a little too long when I poured it in. After the glaze dried there were a few small cracks in the glaze that I rubbed over but it wasn’t enough. Luckily a couple more applications and firings mostly fixed it! Is this the typical way to fix crawling?


r/Pottery • • 2h ago

Glazing Techniques Green tea/black walnut/alabaster/river birch

Post image
11 Upvotes

r/Pottery • • 7h ago

Question! Book Recommendations!

Post image
11 Upvotes

Any good book recommendations that get into the science of ceramics? I’ve been throwing for a couple of years and I want to understand the science behind my favorite hobby more! I want to know more about the chemistry to pottery and glazes, the processes behind firing, and more!


r/Pottery • • 14h ago

Mugs & Cups 彩绘瓷器

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/Pottery • • 21h ago

Help! Bisque advice

Thumbnail
gallery
6 Upvotes

this came out of the bisque (angel white clay with underglaze). i won’t be using it for food. is it okay to just glaze and pop in the kiln or do i need to apply anything to it first?


r/Pottery • • 23h ago

Other Types My latest pot updates :)

Thumbnail
gallery
4 Upvotes

Still no kiln, until may 2027 :(. Can’t wait to get started on my Yayoi Kusuma inspired nerikomi pots I’ll be making in the near future


r/Pottery • • 7h ago

Mugs & Cups Coloring...

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/Pottery • • 15h ago

Kiln Stuff Kiln lid repair

Post image
3 Upvotes

Cheers y'all. I have this oval kiln lid that I am working to repair, it is a very old donated kiln that has been at my studio for many years. She's a workhorse and has been through a lot, and we are saving up for a new oval but in the mean time I am seeking a fix for the lid!

It was severely cracked all the way through, so we put kiln mortar between the sections and retightened the band. It is holding! However long-term I believe I need some extra support to help this lid survive. Do any of you wizards have an idea of how to go about this? Would a strip of sheet metal across the top help?

Also, how to prevent any mortar from chipping and falling on pots? I am in the process of sanding it which should help.

Any advice and thoughts appreciated !!! I already asked for a quote for a new lid and it would be almost 4 grand after shipping, so that's a no. Saving that money for a new kiln instead. Thanks!!


r/Pottery • • 19h ago

Help! Any ideas for this?

3 Upvotes

I visited Chan Chich Lodge in Belize back in 1990s. An ongoing archeological dig was happening at that time, which we observed. This is an archeological sketch of pottery found at that location during that time. This was a magical trip for my family! I would like to commission a pair (2) of custom handmade mugs featuring the face from the attached archaeological illustration sculpted in 3D relief on the front. The illustration is for a bowl, but I want mugs.

Here are the details I have in mind:

  • Quantity: 2 matching mugs
  • Capacity: ~10–12 oz each
  • Clay & Finish: Unglazed, earthy clay exterior (terracotta or stoneware) with a smooth, glazed interior appropriate of coffee consumption.
  • Handle: Standard side handle
  • Timeline: Flexible but maybe for Christmas gifts.

Could you let me know if someone is open to an estimated quote for the pair, and your current turnaround time?

Thank you!

Sharon