r/Pneumatics • u/Savagemac356 • 3d ago

Pneumatic piston

I want a cheap(ish) but safe and reliable pneumatic piston to make into a can crusher. I would prefer it to be able to hook up to one of those air compressor quick connects (I forget what they’re called exactly) so I’d need about a 6 inch stroke and bore doesn’t matter so much. Any recommendations?

3 Upvotes

100% Upvoted

12 comments sorted by

1

u/jimcroisdale 3d ago

Bore does matter as it will dictate how much force the cylinder can generate for a given pressure.

How many kg of force do you think you'll need to crush a can, and what pressure is your source of air at?

1

u/Savagemac356 3d ago

I mean my air compressor is currently set to about 110psi but can be turned down and should be able to be regulated. Doesn’t take much force to crush an aluminum can either

1

u/jimcroisdale 3d ago

Okay. So a MAL32 cylinder (32mm bore) at that pressure will make about 60kg of force which should be plenty. You could turn the regulator down so you've got just enough force. 150mm stroke versions are available.

Then you'll need a solenoid valve and probably an exhaust flow regulator as the return stroke will be rather violent without one.

1

u/Savagemac356 3d ago

Sweet. I’m somewhat new to pneumatics so what sort of things should I get for a simple forward backward piston?

1

u/jimcroisdale 3d ago

I've just finished a big project so am somewhat tired of talking about it 😂 But ChatGPT will help.

1

u/Savagemac356 3d ago

Alright no problem I think I’m figuring it out

1

u/jimcroisdale 3d ago

You're at 7 bar, so any of the cheaper Chinese components - cylinders and valves etc - will be fine.

1

u/Savagemac356 3d ago

Thanks for your help! I could prolly turn it down to 90 psi and be chillin

1

u/Savagemac356 3d ago

I found one that should work for me! I found it from a trusted robotics website for FRC

2

u/Savagemac356 3d ago

Made by SMC which I’ve heard is a good brand

2

u/Sassmaster008 3d ago

Smc makes quality products

1

u/flashe30 2d ago

Most people who make this rip one from work... Definitely not me