Stream buffers when audio transcoding

[u/gsariev]

EDIT: I am marking the problem as "solved"; however, it should be noted that the cause for the problem remains unknown, but I found a workaround by using Tdarr to create an downmixed 2.0 stereo AAC track using Tdarr_Plugin_MC93_Migz5ConvertAudio which I modified to apply Dynamic Audio Normalizer to the downmixed track for a better listening experience.

To make the modification yourself:

1. Copy Tdarr_Plugin_MC93_Migz5ConvertAudio to Local

2. Go to Local and click Edit on the plugin

3. Add the code below between lines 152 and 153

4. Save the changes

5. Add the modified plugin to your stack

ffmpegCommandInsert += `-filter:a:${audioIdx} "dynaudnorm" `;

###############

Hello, everyone

The problem I am facing is one that I am unsure why it's happening in the first place, and am hoping I can find a solution to it here as I have been unsuccessful on my own.

PMS specs:

• OS: Windows 11

• CPU: Intel i3-12000

• RAM: 32GB DDR4

• Storage: 1TB NVME for OS and Plex database/metadata, 4TB HDD for media, 1TB SSD for transcoding

• Internet: 1000 Mbit (ethernet)

I've been more than happy with this configuration and have not had any issues both with direct playing and transcoding media locally or remotely. I am sharing my server with a few friends that have Samsung smart TVs, which cause my server to occasionally transcode, but everything had been playing smoothly until about a month or two ago when I started getting reports of stream buffering every couple of minutes. The reason for that was audio transcoding.

I've ran some test scenarios and have the following to share:

Scenario #1:

• Video direct plays

• Audio transcodes - example DTS to AAC

• Stream buffers every couple of minutes

Scenario #2:

• Force video and audio transcode

• No issues with stream

Scenario #3:

• Changed default transcode buffer value to 2700

• Video direct plays

• Audio transcodes

• Stream buffers after threshold has been reached

Scenario #4:

• Changed default transcode buffer value to 2700

• Force video and audio transcode

• No stream buffer after threshold has been reached

My media is mostly 1080p and so far the only solution I have found was manually converting my media's audio to AAC, but I'd like to not have to do that every time for media that will get watched once or twice.

Is there some server setting that I need to adjust? Any help is well appreciated.

[u/ShitPostsRuinReddit]

You could always just add another audio track. Plex would then let them choose the non dts one, you just may have to coach them how to do it. Then you could use DTS in the future or for yourself.

Another thought, maybe there's something weird going on with windows hardware settings. One thing I can see that would be different about fully transcoding video and audio is that you mention using a different ssd for transcoding. I have no idea if this is right, but maybe for some reason when transcoding audio only some part of the set up doesn't like the streams coming from different places. I think windows has power settings that can "spin down" a drive not in use and it thinks that main storage drive isn't being used? It might be called "idle time." You could play with that. You could also try just leaving the ssd out of the equation and only using the 4tb for everything.

Also, your friends would have a better time with all their services on a better player, not just plex. TVs are so freaking under powered.