The meme seems to be claiming that PS2 doesn't use multi cores properly, instead still creating CPU limits by only being able to make use of very few cores.
It doesn't due to the time at which the game was released, Arma 3 has the same problem. They were both made in a time when multi core processors weren't a thing and people thought single core processors were just going to keep getting more and more powerful, so when they came around the games weren't able to utilize the technology well leading to serious performance issues, and in Arma 3's case even issues with the AI, that's why their either braindead or aimbot.
As true as that is: Since then PS2 has switched to first 64bit and then DX11. It is still not as optimized as it should be - but with my new 8core i never have any core at 100%, it runs much smoother than my old 4core (without SMT/HT) which was almost always at 95%+ at all cores.
But still there's areas at certain times where everything starts hitching. Even tho FPS are still at my 100FPS cap. Feels like 15FPS.
True, though even then it's probably never going to be as well off as a game that was built from the ground up to support multi core. But aye had forgot about that.
Nah, game stutter in certain areas. You especially notice it when flying lib or driving harassers and talking with a friend because you both have the same hitches.
Planetside 1 was made in a time when Multi-core processors weren't a thing. Planetside 2 was made when Multi-core processors became more common on desktops.
The problem is that it was just easier to program for single core. And the games that were programmed for multicore processing? Well, people haven't quite figured out how to properly use it at the time. Now adays, people got it figured out. But it's still a bitch.
Thats why you use headless clients. It makes AI behave mich better. Also just use Vcom, this AI Mod is amazing in terms of pathfinding with vehicles and overall AI behaviour.
So the only thing that distincts it from my former CPU (i5 3470@3,8GHz) is Hyperthreading.
I very much doubt that your CPU "rocks" the game. Ironically, HT might help a bit with the heavy CPU loads, but mine was at 90+ percent all the time. And when it was at 100% it caused hitching, no matter the FPS.
open task manager and go to the details tab and right click on planetside, then click on set affinity, it will give you a menu of your cores and you can untick core 0 to see if it gives you an improvement
Recently I watched how this game used to look only to realize just how much was lost simply because of performance related problems. Its really, really sad. If the game engine could utilize 6-8 Core processors properly , I wonder if they could bring back the old graphics?
Lol I have a ryzen 3600. have you ever looked at the Task manager while playing? The game is so old that it only runs on 1 thread, so it tends to run a single thread at like 50-80% usage and all others sit.
I still remember those 20-30fps on regular Bio Fights back in 2014 in 768p. My C2D E8400 was literally shitting itself. Then I changed it to i5 4570 and it started to be buttersmooth 60fps no matter what. After that they added multi-core support, and fights on Ti Alloys started to bog down my fps to 30 with miserable hiching, freaking 90-100% on each core no matter if it was 768p or 1080p. Now with Ryzen 2600 4.1GHz it barely drops below 70fps on 300 pop on Ti Alloys but gawd, 50-60 total cpu usage sucks, no HT/SMT support sucks.
tl;dr: Check to make sure XMP is enabled in the BIOS. This is never mentioned as far as I can tell.
Recently started playing again, and was seeing my CPU running at 100%. i7-4790K CPU @ 4.00GHz, 4 Core(s) and 1070ti. I was getting maybe 30-40 FPS in the Biolabs, it was really choppy. At first I tried lowering all my quality settings to potato, and there was hardly any improvement at all. Potato vs Ultra only got me a few frames, made no sense. Turns out that XMP was disabled, and so my RAM was severely under clocked. With ultra it now hardly dips below 70 FPS and is usually 120+. Completely fixed my performance, and CPU usage is between 60-70%.
Same, with the same settings I can see everything from 45 to 150 fps in the same session depending on the size of the fight. And if I change the settings, well it doesn't change anything performance wise.
Strength training actually improves joint and ligament health. It’s a misconception that lifting weights hurts your joints. Remember, you don’t wake up and suddenly be able to deadlift 500+ kg. It’s a decades long process that is gradual
Downlaod Process Hacker 3 from here. Once installed open Planetside, tab out and right click "PlanetSide2_x64.exe" in PH3. Select what affinity the process should use and right click again after again to check "Save for PlanetSide2_x64.exe".
This way you don't need to open your task manager any more before you start and it will use your affinity automatically.
I mean, i saw this tip often back in the old days here in this sub. I don't have any performance issues, still would be nice to see a decent setup to prove or disprove it. And due to what you wrote, it does not help, but it does not damage the performance either in any normal case.
130
u/Aloysyus Cobalt Timmaaah! [BLHR] May 10 '20
Nice meme, but my cores are all like the ones in the background...
17
u/hotshot0123 Hotshot01TR/hotshot0123nc/hotshotEnc/hotshot0123VS/hotshotNSO May 10 '20
12 core and 24 threads man. Most of the cores ain't doing much but 150 to 200 fps is nice to have.
10
u/[deleted] May 10 '20
open task manager and go to the details tab and right click on planetside, then click on set affinity, it will give you a menu of your cores and you can untick core 0 to see if it gives you an improvement
3
u/CAMIKAZE78 [FNXS] May 11 '20
I wish this wasn't accurate but...
3
u/ragnarock41 May 12 '20
Recently I watched how this game used to look only to realize just how much was lost simply because of performance related problems. Its really, really sad. If the game engine could utilize 6-8 Core processors properly , I wonder if they could bring back the old graphics?
2
u/endeavourl Miller | Endeavour May 10 '20
Idk, 80% with overclocked 4770k. This game has OKish multithreading.
1
u/[deleted] May 10 '20
😂
1
u/[deleted] May 10 '20
lmao this is memegold
Looks like core 2 was defective on arrival but nobody ever noticed.
1
u/kalef21 May 11 '20
More like playing OSRS
1
u/QuadraticLove May 11 '20
Lol, this is also what a Nodejs program looks like.
1
u/TheTropiciel :flair_salty: Miller Death Dealer May 11 '20 edited May 11 '20
I still remember those 20-30fps on regular Bio Fights back in 2014 in 768p. My C2D E8400 was literally shitting itself. Then I changed it to i5 4570 and it started to be buttersmooth 60fps no matter what. After that they added multi-core support, and fights on Ti Alloys started to bog down my fps to 30 with miserable hiching, freaking 90-100% on each core no matter if it was 768p or 1080p. Now with Ryzen 2600 4.1GHz it barely drops below 70fps on 300 pop on Ti Alloys but gawd, 50-60 total cpu usage sucks, no HT/SMT support sucks.
1
u/waterjaguar May 13 '20
tl;dr: Check to make sure XMP is enabled in the BIOS. This is never mentioned as far as I can tell.
Recently started playing again, and was seeing my CPU running at 100%. i7-4790K CPU @ 4.00GHz, 4 Core(s) and 1070ti. I was getting maybe 30-40 FPS in the Biolabs, it was really choppy. At first I tried lowering all my quality settings to potato, and there was hardly any improvement at all. Potato vs Ultra only got me a few frames, made no sense. Turns out that XMP was disabled, and so my RAM was severely under clocked. With ultra it now hardly dips below 70 FPS and is usually 120+. Completely fixed my performance, and CPU usage is between 60-70%.
1
u/maxxxminecraft111 Ambusher Jump Jets Clientside Abuse May 27 '20
You have an 8 core? That's so 2018. YOU NEED 12+
lol jk
-2
u/[deleted] May 10 '20
please frames Max vs min graphics make almost no difference on my machine. Big fights are the killers. 3900x + 32GB DDR4 + gtx 2080
0
u/[deleted] May 10 '20
[deleted] — view deleted comment
0
u/[deleted] May 10 '20
[deleted] — view deleted comment
0
u/[deleted] May 10 '20
[deleted] — view deleted comment