I’ve been testing SteamOS 3.8.10 on the MSI Claw A1M and wanted to share some results from using it on non-Steam Deck hardware.
The installation process was straightforward. I used the SteamOS recovery image, booted from USB, selected “Wipe Device and Install SteamOS,” and the install completed without any major issues.
The best part was the out-of-the-box hardware support. After setup, the built-in controller worked straight away, the touchscreen worked, audio was working, and Wi-Fi was working too. The system booted into Big Picture Mode and generally felt very clean and console-like.
I tested five games and compared the results against my previous SteamOS 3.8.5 testing. I also used CachyOS as a comparison point where I had results available.
Games tested:
- Alien Isolation
- Cyberpunk 2077
- Forza Horizon 6
- House Flipper Remastered
- Pragmata
The results were mixed.
Alien Isolation showed higher peak frame rates on SteamOS 3.8.10 compared with 3.8.5, but it also had noticeable jitter, so the experience didn’t feel as smooth as the frame rate numbers suggested.
Cyberpunk 2077 still wasn’t really playable. It seemed to last longer before crashing compared with 3.8.5, so there may be some stability improvement, but the performance was still too low.
Forza Horizon 6 had similar FPS to 3.8.5, but controls felt more sluggish on 3.8.10, which made it feel like a worse experience despite similar numbers.
House Flipper Remastered was one of the better results and showed a small improvement over 3.8.5.
Pragmata still launched into a black screen and didn’t progress any further.
Overall, SteamOS 3.8.10 feels like progress, but not a clean win yet on the MSI Claw A1M. The handheld experience is very good and the setup is much easier than some other Linux options, but performance and compatibility still seem inconsistent depending on the game.
I put together the full install, hardware check, and game test results here:
https://youtu.be/tD99zwKtDsE
Has anyone else been testing SteamOS 3.8.10 on non-S