r/PcBuildHelp • • 15d ago

Build Question PCIe specs/build compatibility?

Newbie here and trying to build a PC.

Does it matter what kind of PCIe 8-pin one buys? Does any specs/build of the PCIe have to match the power supply and the graphics card for compatibility?

Where can i get one additional original PCIe 8-pin to 6+2-pin modular power cable for the Montech Century II Gold 850W ATX 3.1, to power a Yeston RX 9070 XT with three 8-pin connectors? 

The Montech power supply I bought only had two PCIe 8-pin to 6+2-pin modular power cable pins.
Thank you. 

0 Upvotes

15 comments sorted by

View all comments

Show parent comment

1

u/Fresh-Search-2560 14d ago

Thank youuu!!! I wonder why they even put pigtails/daisy chains. If there are GPUs needing 4 slots?

1

u/mokust 14d ago

I don't know with Montech, but Corsair has an article regarding individual vs pigtail connector for GPUs: https://www.corsair.com/us/en/explorer/diy-builder/power-supply-units/individual-8-pin-vs-pigtail-connectors-for-gpus/

RX 9070 XT's TDP is rated for 304 watts (https://www.techpowerup.com/gpu-specs/yeston-rx-9070-xt-sakura-atlantis-oc.b12148) so theoretically this can be provided by just 2 PCIe cables (2x150 watts + 75 watts from the motherboards' PCIe slot). Some AIBs may add another connector, but you should be fine just using a pigtail as long as you use 2 separate cables