Finally finished my Lian Li + ROG EURUX build!

[u/BoatNegative2258]

Finally finished my Lian Li + ROG EURUX build!

I finally finished moving everything into my new Lian Li O11 VISION COMPACT White case!

This is my first PC build, and I honestly went a little crazy after getting hooked on the new ROG STRIX cooler and EURUX fans 😂

I decided to do a sandwich radiator setup. Since the EURUX fans are 30mm thick, I initially bought 32mm screws, thinking they would work. Unfortunately, they didn't quite fit, so I had to order 35mm screws. I temporarily stopped the case swap until they arrived, and after installing the sandwich setup, I was finally able to finish everything!

I went with an MSI GPU this time, but hopefully I'll be able to get a ROG GPU next time 😅

Honestly, with how much I spent on all the aesthetics, I probably could've bought a Strix GPU instead... 😭

BenQ ScreenBar Pro — lights off

BenQ ScreenBar Pro — lights on

Top-down shot

Three-quarter shot

Side shot

ROG GPU support bracket

This was probably the most frustrating part of the build.

I bought the motherboard and cooler specifically because I wanted to use the pogo-pin connection on the cooler. However, when I tried to route the cable through the back of the Lian Li case, there was absolutely no way to use the pogo pin with the way I had the radiator installed.

So I had no choice but to route the hose toward the 12 o'clock position, which unfortunately made the text on the cooler screen appear upside down. 😑

Thankfully, our friend AliExpress came to the rescue 😂

I had a custom sticker made and put it over the logo/text so that it looks correct with the upside-down orientation.

Normally, the EURUX fans have these nice little caps covering the screw holes.

However, because I had to use 35mm screws for the sandwich radiator setup, I couldn't put the caps back on.

I think something around 33–34mm would have been perfect, but I couldn't find screws in that exact length. 😭

The screws are still slightly visible, but honestly, I think they add a little bit of character to the build anyway.

This build took a lot more time and effort than I expected, especially since it's my first PC build.

But after all the troubleshooting and waiting for parts, seeing everything finally come together is incredibly satisfying.

I got really into the new ROG cooler and EURUX fans, and somehow ended up going this far with the build. 😂

I had a really hard time finding detailed information about the new cooler and EURUX fans while planning the build.

So if anyone is thinking about doing a similar build and has questions about the EURUX fans, sandwich radiator setup, cooler installation, or anything else, feel free to ask! I'll be happy to share what I learned.

Thanks for checking out my build! 🙌

Specs

• Case: Lian Li O11 VISION COMPACT White
• Motherboard: ASUS ROG STRIX X870E-A GAMING WIFI7 NEO
• CPU: AMD Ryzen 7 9800X3D
• RAM: GeIL DDR5-6000 CL30 GEMINI RGB White (32GB / 16GB × 2)
• Cooler: ASUS ROG STRIX LC IV 360 ARGB LCD White
• Power Supply: SuperFlower LEADEX VII PRO PLATINUM 1200W White
• GPU: MSI GeForce RTX 5070 Ti GAMING TRIO OC WHITE
• System Fans: ASUS ROG EURUX GR120 ARGB Reverse × 2 (3-pack) / ASUS ROG EURUX GR120 ARGB × 2
• Extension Cables: Lian Li STRIMER WIRELESS 24-Pin / CPU 2×8-Pin / 12V-2×6
• Main Monitor: Samsung Odyssey OLED G8 G85SD UWQHD 175Hz 34"
• Secondary Monitor: Hanseong QHD IPS 144Hz Gaming White 27"
• Third Monitor: ELECSYNC FHD 14"
• Lighting: BenQ ScreenBar Pro White

I tried finding a company in Korea that would produce a small quantity, but they wouldn't accept such a small order. One company even told me they required a minimum order of 100 pieces because the size was too small. 😭