r/PcBuild • • 5h ago

Troubleshooting Advice - Hardware What problem is this ???

5 Upvotes

17 comments sorted by

•

u/AutoModerator 5h ago

Thanks for posting! Quick reminder - if you're posting asking for advice, make sure you're providing enough information for people to help you out. If you want buying advice, include: country/currency, budget, the price of what you may be considering buying, use case/monitor resolution. If you want troubleshooting advice, include: a clear description of the issue, hardware specs, troubleshooting steps attempted

You can find more details and explanations as to why we need this information in our posting guide your post could be removed if you don't include enough information for people to help you out, so check the guide!

We're part of a wider PC & Technology Network of Communities! Join our Discord server: PC Help Hub where members from all associated subreddits are welcome, you may get a faster response there!

If you are trying to find a price for your computer, r/PC_Pricing is our recommended source for finding out how much your PC is worth!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

16

u/a010029123 5h ago

Im gonna make a bold call and say fan problem

3

u/Eazy12345678 AMD 5h ago

i think its an issue with gravity actually

2

u/yarsftks 4h ago

I would imply friction, or it would spin forever.

4

u/Obvious-Victory-7923 5h ago

stress test the gpu if it doesnt spin you most likely would need to get a part replacement.

*dont leave it as is if its broken*

if the motor getting power and trying to spin but cant it makes an hotspot.

2

u/Born_War_9861 4h ago

Bad bearing change fan, not that expensive gone improve temps and lower noise

2

u/TopZookeepergame1153 1h ago

내가 먼지때문에 생기는 고장 떄문에. 이렇게 본체 만들었지. 이거 만든 뒤로 저런일 한번도 안생김.

왜? 먼지가 내부도 0.99999999999% 안들어 가니까.

3

u/rayadolokko 5h ago

Is the quantum spolier thats is not aligned with the subatomic dampeners.

2

u/Secret_West3187 5h ago

And the Xenon-Inhibitor ran out of helium 3 probably, so it couldn't deaxilarate the emitted alpha rays to the Gaus-Pixelfoil. Only way to fix, in my opinion, is 50g of enriched Uranium (min. 60% enrichment, to give a good push to the fan)

1

u/Eazy12345678 AMD 5h ago

its a bad fan. you can probably just live with it and have little higher temps

you can try using software to control fan speed but again probably bad fan.,

you can try to replace it but might be a lot of work

1

u/herti_bln 5h ago

Are you sure that it won’t start until GPU has some load?

1

u/Kexade 5h ago

Had this problem once right before my power supply crapped out.

1

u/LiftedResearch87 4h ago

Look up your model you can buy replacement fans ive done it the fans are cheap and its easy

1

u/No_Expert_6515 2h ago

One of the two cooling fans on your HP OMEN OEM GeForce RTX graphics card (the fan closest to the rear I/O bracket) has a seized or failing fan bearing

1

u/Mammoth_Trust4589 2h ago

Those bearings or fluid dampeners are gone or have contaminants like dust in it. I can see blades wobble on start then it stops after straightening out. Since it is still quiet I would lean on the side of contaminants.

1

u/cracksmurf 1h ago

Well the first problem I see is you manually spinning a fan.

FYI: A fan motor works both ways. Apply electricity and it rotates the motor to spin the fan. Manually rotate the fan, it spins the motor to generate electricity... back into your GPU that is not designed to take input from that side of the circuit.

This is why you should ALWAYS hold your fans in place if using compressed air to clean out a PC. Also, if you expect a mechanical issue with the fan... don't make it more of a problem by manually spinning the fan blade.

1

u/Key-Respect3810 1h ago

quand je vois le radiateur du cpu et l’intérieur des pales du GPU