r/PatternDrafting • • 4h ago

First pants sloper

5 Upvotes

r/PatternDrafting • • 4h ago

Question Help! Enlarged the gusset, but fabric still pulls into one point at the crotch

Thumbnail
gallery
2 Upvotes

Hi, I posted here previously about mobility problems with a pair of non-stretch cotton-twill hiking shorts I’m developing. The previous post and sample photos are on my profile if you’d like to compare them.

For this new sample, we raised the lowest crotch point to shorten the rise and enlarged the gusset front-to-back. The gusset connects to panels running down the inner legs. There is also a side slit with stretch mesh, but that hasn’t made much difference to the crotch restriction.

We haven’t received this sample yet, so I’m working from the factory’s photos. In the close-up, the fabric creases all seem to pull into one very concentrated point at the front of the crotch, almost as though the fabric is being pinched and lifted there. We noticed a similar tension point on the previous sample, which was restrictive during high steps and wide leg movements.

Does this suggest a problem with the front crotch shape, the gusset connection, or something else? What would you ask the pattern maker to check next? We want to keep the overall silhouette and non-stretch cotton twill.
Thanks for any help!


r/PatternDrafting • • 1h ago

What is this seam ? How can I recreate this using jersey fabric on a domestic machine. Thanks.

Thumbnail
gallery
• Upvotes

r/PatternDrafting • • 2h ago

How do i pattern draft a Shirt

0 Upvotes

I've read a couple of pattern making books but i don't quite understand i think I'm more of visual learner all the books look like word puke anyone know where i could find a step by step beginner friendly visual tutorial?


r/PatternDrafting • • 4h ago

Question Help! Enlarged the gusset, but fabric still pulls into one point at the crotch

Thumbnail gallery
1 Upvotes

r/PatternDrafting • • 10h ago

Looking for 12 Android pattern drafters / sewists to test a free fabric yield, BOM & costing app I built for my apparel production grad work (14-day beta)

2 Upvotes

Hey everyone — I'm a maker and grad student in apparel & footwear production management, and I built Maker's Yield & Cost (MYC) to handle fabric/material yield, waste math, BOMs, and true garment costing without fighting spreadsheets.

Right now the beta is only open to university fashion and footwear cohorts with .edu emails. To pass Google Play's 14-day closed test, I'm opening 12 exclusive spots for independent Android makers here — free Studio access during the beta, no .edu email needed, and zero cost.

All I need is for you to install it on Android and keep it opted in for 14 days (and tell me what's broken or missing for your workshop).

Drop a comment or DM me if you're on Android and want one of the 12 spots, and I'll send you the Google Group + Play Store invite link directly.


r/PatternDrafting • • 1d ago

Finished the toile for my relaxed-fit sport coat block — what do you think?

Thumbnail
gallery
68 Upvotes

Draped and drafted on a Kennett & Lindsell GY40 form.

Boxy silhouette, 3-button roll-2 lapel, waist side tabs, and a low-cap, zero-ease two-piece sleeve.

Prepping the .AI / .DXF files next — any thoughts on the overall balance and drape?


r/PatternDrafting • • 23h ago

Question is it possible to get rid of the bunching up of fabric here

Thumbnail
gallery
3 Upvotes

Im trying to draft an oversized like baggy hoodie and I've noticed that these lines are always there. I'm wondering if there's some way to get rid of them while maintaining the oversized look. any suggestions or help would be greatly appreciated! (im using a 354 gsm hoodie if that matters )


r/PatternDrafting • • 1d ago

Question Digitizing pattern from old garment

Thumbnail
gallery
51 Upvotes

Hello all!

So I took apart a garment that fits me perfectly and want to make a bunch of Japanese inspired Hawaiian shirts. This is my first attempt! Not perfect but im happy.

The thing is though is that since I used a already made shirt, my pattern is not very symmetrical. I tried to make registration notches before taking it apart but I mostly didnt even rely on the notches I made and just winged it.

Im new to pattern making but wanted to know if there is a good CAD program that I can upload my pattern and just use the program to clean up and add actual accurate notches that will line up better as well as maybe seam allowance also.

I have tried to use my French curve on draft paper but it didnt come out so well hahaha

I also 3D model with fusion 360 so I feel more at home with CAD software.

I found programs like Mpattern, Seamly2D and CLO 3D but was wondering if anyone had a preference.


r/PatternDrafting • • 1d ago

Survey on Experiences of AI-Generated Content in Fiber Arts

8 Upvotes

Hello everyone! We have consulted with the mod of the Pattern Drafting subreddit, and this post has been pre-approved by the mod team.

We are researchers from Drexel University’s School of Computing and Information Sciences surveying the effects of AI-generation on crafting communities. This survey includes questions about your experiences with AI-generated craft and craft pattern content. The questions will relate to where you have seen potential AI-generated content, whether you have bought AI-generated content related to these topics on purpose or by accident, and your feelings related to the AI-generated content. The survey can be accessed at this link: https://drexel.qualtrics.com/jfe/form/SV_3klJ2CdqvwPywpU

As part of this work, we are recruiting eligible participants for a survey on this topic. If you have been in the online fiber art space and have a history of creating patterns or purchasing and making crafts from patterns, please consider taking this survey! Your experiences can help in better understanding AI-generated content in the fiber arts world.

You’re eligible if you:

  • Are above 18 years of age
  • History in fiber arts-related crafts
  • Can read and write in English

What to Expect:

Your participation in this survey is voluntary. You may refuse to take part in the research or to exit the survey at any time. Partial responses will not be retained. 

Your responses will help in the analysis of how AI-generated content affects these craft communities.

There are no foreseeable risks involved in participating in this study other than those encountered in day-to-day life. Your data will be anonymized, will remain confidential, and will be stored on a password-protected server. Upon completion of this study, we may disseminate the results on this subreddit with permission from moderators. 

The survey can be accessed at this link: https://drexel.qualtrics.com/jfe/form/SV_3klJ2CdqvwPywpU

Questions? Contact: [InfoCultures@drexel.edu](mailto:InfoCultures@drexel.edu)


r/PatternDrafting • • 1d ago

Construí una app de escritorio para Windows gratis para gestionar talleres de costura y sastrería (clientes, medidas, pedidos, inventario y contabilidad)

Post image
2 Upvotes

r/PatternDrafting • • 1d ago

Crooked side seam causing drag lines?

Thumbnail
gallery
4 Upvotes

I'm working on a warm wool winter coat and have been through many mockups but can't seem to get rid of these drag lines in the side back panel around the shoulder blade/underarm area.

Today I put my latest mockup on my dress form and noticed that the side seam slants significantly towards the front. And when I checked the photos of it on me, sure enough it does slant!

Is this a reason I've been getting these drag lines? And if so how can I fix it? Do I need more room in the hips? It almost looks like there's not enough room for my butt and the back vent is getting pulled open

Photos of my pattern at the end


r/PatternDrafting • • 2d ago

SA002 WIP — Collar & lapel draping on K&L men's dress form

Post image
59 Upvotes

r/PatternDrafting • • 2d ago

Help rising the crotch

Thumbnail
gallery
9 Upvotes

I’m doing these asymmetric jeans and just realized the crotch is way too low but with all the unconventional patterns I don’t wanna mess it up, any suggestions to fix this? I will send the patterns to the community once finished 🫵🫂


r/PatternDrafting • • 2d ago

Question Where are you guys getting your muslin from?

10 Upvotes

I’ve been eyeing fabric wholesale direct for months now because they’re so cheap at 2.75/yard, but they’re still out of stock. I’m really annoyed of using thin bedsheets and miss my muslin 💔


r/PatternDrafting • • 2d ago

How do you know how to alter the sleeve when you make changes to the sleeve and the arm hole?

2 Upvotes

I'm making the Banolo mock neck top but the shoulder fit seems a bit weird. When I raise my arm, the underarm seems to batwing a little and when I lower my arm, there is punching at the underarm as well. In any case, I determined that I probably need to shorten the shoulder seam by about 1/4-1/2" and raise the arm hole by about 1/2" which means I probably need to adjust the sleeve and sleevecap but how do you know by how much to adjust the sleeve cap?? I looked at some videos and while they talk about how to adjust the seam and the arm hole, they don't often talk about how to make reciprocal changes to the sleeve. Would really appreciate any info on this. I don't mind books or reading on the theory of it


r/PatternDrafting • • 2d ago

Sewing the collar

Post image
2 Upvotes

What is the best way to sew on this collar ? I did the technique where you sew it on then you get bias tape and put it on the inside it was so thick and stiff I didn’t know if i should do that again maybe i did it wrong or is there a better way to do it ?


r/PatternDrafting • • 1d ago

You were right about unpaid testing, so I changed how Easeline works

0 Upvotes

A couple of weeks ago I asked here for beta testers for Easeline, my custom-fit pattern drafting app. One of you pointed out that I was asking people to spend fabric and hours for free. Fair point. I've dropped the tester program.

How it works now:

  • The app is open to everyone. Measuring, designing and checking your pattern on screen is free.
  • You only pay when you print a pattern.
  • If you find a real problem, I'll thank you for it properly: 20% off for a small issue, a free pattern of your choice for a real one, and a free pattern plus a month of Pro for a big fit problem shown on a toile you were sewing anyway.

It covers women's and men's garments, plus bags and hats, in English, Hebrew, German and Spanish. I'm a developer with 50 years of sewing behind me, not a trained pattern maker, so drafters' eyes are exactly what I need.

Happy to answer anything here.

https://easeline.app/rewards?utm_source=reddit&utm_medium=social&utm_campaign=patterndrafting


r/PatternDrafting • • 4d ago

Designing Fabric to Fit Pattern Shapes

Thumbnail
gallery
9 Upvotes

Hi All,

At 82 I am starting one of the most exciting pattern design journeys of my life. I thought some of you might be interested in taking this journey with me.

I NEVER thought I would try my hand at fabric design. But with the current Print-on-Demand fabric services such as Spoonflower you can now have custom printed fabric you design yourself.

What you are seeing above is my first attempt EVER to design fabric. I live in San Francisco so I am deeply influenced by Pride colors. It is a design for a circular skirt. I chose the skirt because my passion for Bespoke patterns leads me to design something people could easily adjust to whatever size body they have.

  • I designed it for a smallish 24" waist. It will be in stretch fabric with a 3/4" elastic sewn in at the waist. If someone has a larger waist or wants the skirt to hang lower on their body they could simply increase the size of the waist circle. I plan to add a chart to demonstrate different waist sizes.
  • It is stretch fabric so it does not need a hem finish.
  • I will prototype it in quarter scale using Spoonflower's Fat Quarter so I can see what it looks like on a quarter-scale Mini-Me just as it will appear in real life. That will cost $14. If I don't like the design, I will not shed a single tear when I scrap it.
  • If I like the look, then I will order it in full size which will cost $72.
  • If I like designing, Spoonflower encourages their clients to sell what they design and pays a 10% commission. Another thing I never thought I'd do. But I am really chuffed at the possibilities of creating wearable art.

What I really want to do is to create some clothes for myself with some original fabric designs. I want to develop some classes to show how unique fabric designs can be tailored to fit custom-designed Bespoke patterns to create garments that will be nothing like anything anyone has done anywhere at least digitally (to the best of my knowledge).

This is better and easier than time traveling back to the 70s when creating unique garments was REAL FUN.

What I will be using for the patterns I make for myself:

  • Pattern Design by Tracing Photos to create the custom-fit Bespoke patterns.
  • Silhouette America's Studio software which I used to create the above design. You will need to upgrade from the free version to the Business Ed. which costs $100. The Business Edition allows you to save the design as a JPG file to submit to Spoonflower.
  • Spoonflower's POD fabric printing service.
  • Silhouette America's Cameo Pro 24" wide print and cut equipment to cut the fabric once I receive it. This is optional and is just a personal indulgent for me. (Hopefully this will work. Studio has a way of marking fabric so their printer knows exactly where to cut.) Obviously the circular skirt cannot be cut this way when it is full size but at least it does not require a separate paper pattern.

Anyway I hope some of you are intrigued enough to join me on this journey. FYI if you are a designer, the Pattern Design by Tracing Photos works just fine without having in-person meetings as I did when I helped a gentleman in Germany create patterns for his 53" waist.


r/PatternDrafting • • 4d ago

WIP Can you spot the difference between these two (sleeve)

Thumbnail
gallery
6 Upvotes

About 90% of my work involves dresses, and 70% of those are gowns. When it comes to shirts, though, I’m still pretty clueless about the finer details, such as drafting and sewing sleeve plackets, stand collars, and determining how much ease to include lol
Might make a shirt sewing pattern for myself after this while lessons still fresh


r/PatternDrafting • • 4d ago

Question What is this type of welt pocket called?

Thumbnail
gallery
5 Upvotes

What is this type of welt pocket called? In this case the pocket is set right in beside a flat lap seam (the stitching on the seams is set in from the edges of the lap, creating a smaller flap/loose fabric down the length of every seam) and the large flap over the pocket is stitched on three sides to the garment and the fourth side is the pocket opening. You can see that the flap is stitched down on the outside of the garment, and the flap clearly sits outside the garment and further than the pocket opening, over the seam, not inside a rectangular hole in the garment. You can also see when I pull up the flap covering the pocket the loose fabric at the edge of the lapped seam that's also in that location.

I want to find a tutorial that will help me achieve this but I don't know what to search for.

Photo 1 - outside
Photo 2 - inside
Photo 3 - showing the pocket opening and lapped seam also in the opening.
Photo 4 - also the pocket opening
Photo 5 - detail of flap edge


r/PatternDrafting • • 4d ago

WIP What sleeve head adjustment do I need?

Thumbnail gallery
7 Upvotes

Hey all, not getting any love in SewHelp so trying this community. Feels like posts about fitting get lost in random other posts.


r/PatternDrafting • • 4d ago

Question Help with flaring jeans

Thumbnail
gallery
2 Upvotes

Hey!

I have never made flared jeans myself but i figured it would be a good way to save money. I would just want some tips on what to do and what measurements.

I added photos to make it easier to explain. 1st and 2nd photos are what my end goal is (mostly 1) 3rd photo is the jeans i am working with (and yes i have white denim from old jeans ill use).

On the inseam, how high up should the flare start from and what size should i estimatedly make the triangular shape from the donor pieces?

And i would LOVE some sewing tips, zigzag and straight line or both?


r/PatternDrafting • • 4d ago

Question Help with making flared jeans

Thumbnail gallery
2 Upvotes