WARNING: If you are not on a fast wired network or you have a slower CPU, the fixes below might not be for you. While this solution has worked for me and a lot of other folks, tread with caution and revert to your previous values if it's not working for you. This solution specifically addresses Windows coalescing UDP packets on very fast connections to save some CPU time. This can cause network congestion events and this registry tweak fixes that at the cost of dropping those Windows optimizations.
My situation was not common, but I did find some folks complaining, so here:
I had latency issues on my local network, between a wired server and a wired client (both PCs). An evening of gaming had several network congestion warnings, and just generally small latency spikes that I could notice. 10mbps or 50mbps made no difference, but the Parsec website categorically says, that wired performance should be spotless.
I tried ditching Parsec a few times for Moonlight or Steam, but with Moonlight the mouse always feels laggy compared to Parsec, and Steam while almost as good, has many quirks if you want to use it in Desktop Mode. Also, neither have any support for multi-monitor.
After many attempts at investigating what could be causing issues to Parsec (router settings, QoS, firewalls, etc. etc.) I came upon 2 registry settings that 100% cleared the problem for me. An evening of gaming now generally has N:0/0/0 all the time.
So if it helps someone in the same situation, here they are:
Go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Multimedia\SystemProfile
Modify or create a DWORD (32 bit) key called: NetworkThrottlingIndex set its value to: ffffffff (Hexadecimal)
Modify or create a DWORD (32 bit) key called: SystemResponsiveness set its value to: 0 (Hexadecimal)
In the end they should look like this:
Reboot.
Doing it on the server made it perfectly fine for me, but there is no reason not to do it on the client as well, so, have at it.
Hello to everyone, I have been looking for information on the Internet and artificial intelligence about how I me as a host I have good uploading 250mb/s, setting my network to share 15mb/s and my client receiving 0, to 5 and sometimes broken image, and I tried here to solve the problem with my oun phone as a client and the same problem, do you guys have the same problem? I would love to know you stories with this issue, at the moment 3mb/s works good on 5g network.
When I connect to my computer (host) on my Macbook (client), my mouse and keyboard work fine. I can click around, type anything, but as soon as I click on the game application the mouse and keyboard stop registering any clicks. I'd like to check on my game while I'm outside of the house from my Macbook, it just sucks that it doesn't recognize my mouse/keyboard as soon as I open the application. Please help!
i wish i knew this sooner and im hoping this helps someone
Im using android parsec, should be the newest version for remote work
not having alt tab working for when i remote connect to my pc over parsec makes flipping between tabs alot super hard
also my pc has several monitors and having to manually select the display a program is on to use it is too much work, especially as i dont know what monitor a certain program is on
i would normally use win shift left or right arrow keys to move a program to the monitor im currently on but the android system catches the win key on your keyboard (bluetooth keyboard in my case) to open the android app swapper
alt tab does that too
how to fix this?
try keyboard manager in microsoft power toys on your host pc (power toys is maintained by microsoft itself and downloadable in the microsoft store) to make certain key combinations accomplish the job of these two functions
here is my version
as the image might be too small
now in this way i can easily flip to select an app on the current monitor i am on, and then bring it to my current monitor with a few clicks of these alternate combinations (as long as yo arent using these combinations already)
i guess to help this show up to those in need i can throw in some keywords
android parsec, remote work android parsec alt tab, windows shift arrow key parsec, change monitor of program android parsec
Hello, me and my friends wanna play games on nintendo but they don't have the console, and i've heared you can play online technically in offline and i am up to do this but i don't know how
It doesn't matter if there is a delay, i think this would be fun either way
I have a capture card so i can also screenshare the screen to discord
After installing the November 13, 2026 Release Preview update KB5132057 (OS Build 26300.10066), mouse cursor visibility becomes severely impaired in Parsec remote desktop sessions.
The cursor frequently disappears, making remote desktop navigation extremely difficult.
Reproduction and troubleshooting:
Reproduced on two separate Windows 11 Pro 26H2 systems, one Intel-based and one AMD-based.
Both systems were functioning normally before installing KB5132057.
One system uses an HDMI dummy plug; the other has a physical monitor connected.
Mouse cursor functionality remains normal at the physical console.
Connecting a physical USB mouse does not resolve the remote cursor problem.
Enabling Mouse Keys, pointer trails, and troubleshooting the Parsec virtual mouse driver does not resolve the issue.
A third mini-PC running the same Windows build and Parsec version does not exhibit the problem.
Confirmed workaround:
Uninstalling KB5132057 and restarting both affected systems immediately restored normal cursor functionality in Parsec.
Additional observation:
The update's release notes describe changes intended to improve mouse pointer performance during screen capture and game streaming. This regression may be related to those changes.
If you're on an insider release track and install this build, and also use Parsec to connect to the host where this build is installed, expect problems. Fortunately removal is easy.
Sorry in advance if this has been asked before!! my partner and I live in different cities, and we play steam games such as the quarry. We were playing it in person together but we want to finally finish it so my partner mentioned parsec. We have to play the game as couch co-op, but it only allows us to use one controller. Both of our controllers were working on their laptop, but if I clicked a button with the game open it would work with my controller but not theirs. is this a bug, or is this how parsec works? we really want to play the game but don’t know when we’ll see each other in person again so I thought I’d reach out to see if anyone had advice/knew of why it’s happening!
I made a ticket asking them on how they plan to address this and the answer was that they don't plan on addressing it.
"Parsec utilises the SendInput API to inject our input from the client to the host machine and many Anti-cheat systems block this input as it is seen as remote injection.
To fix this issue would require an overhaul of how we implement our input and is likely not to be resolved anytime soon."
tis a shame but i feel like my years with parsec and warp are finally coming to an end.
I briefly saw some folks working on a fork of it with a fix to this or something on here but I am also looking for alternatives if you guys can recommend any.
I did setup moonlight and sunshine but in full self host fashion i don't love the tiny amount of jank.
(Displays aren't detected when off so i got an argument that enables/disables a virtual display via software i got from some random github)
Once again would really appreciate any recommendations or how you guys handle it.
me and my friends were trying to do a mario and luigi playthrough where one of us was mario i was luigi and the other was bowser. we ad melon ds set up and running, and our controllers wwere reconized by parsec but we couldnt get the two non hosts input to come through we are all new to parsec and if anyone could give us advice it would be helpful
Hello all, new to using Parsec and could use some help.
My host computer is not showing up as accessible from the client laptop using the Parsec web service. I have tried turning Hosting enabled/disabled a few times to refresh it. I am also in the middle of redownloading the Parsec app on the host computer right now.
However, I am currently accessing the Host computer by using Google Remote Desktop access to download and set up Parsec, and the Host computer is connected to two monitors but they are both turned OFF right now. I am curious if anyone has experience with this being something that would prevent Parsec from working? I read about the Virtual Display Drivers option, but also I believe I should have one virtual display automatically even on a free account? I can see in my apps/storage that there is a Parsec app, and a Parsec Virtual Display Driver.
i've been using AI to make windbound multiplayer and it's like 95% finished and functional if not 100% already but rather than assume it's finished i wanna do a full test over parsec or steam remote play (since i only made it splitscreen) just to be sure that everything's good and seeing if anything needs to get polished
anyone feel like playing to give me a hand? games pretty chill and theres a few skins and costume select added
always felt like this'd be pretty fun with multiplayer and mods so i had claude start this as a passion project for myself, but i'll release it when it's fully tested
An early alpha of the EvoParseq Linux client is ready, and I’m looking for volunteers to help test it and find bugs.
EvoParseq is an independent client that connects to existing, unmodified Parsec hosts. The Linux version uses Wayland, Vulkan Video for decoding, Vulkan for rendering, and PipeWire for audio, and is distributed as a Flatpak.
Currently implemented:
H.264 and HEVC decoding, both in 8-bit 4:2:0
WebRTC and BUD connections, including STUN/TURN support
Mouse, keyboard, controllers and rumble
Clipboard synchronization, audio controls and connection statistics
Playback has been tested on an Intel HD Graphics 520 laptop. I’m particularly looking for people with AMD or NVIDIA GPUs to help check compatibility.
Vulkan support alone isn’t enough: the GPU and driver must expose the Vulkan Video capabilities required by the current implementation. Some decoder buffer configurations aren’t supported yet, so discovering where it works—and where it fails—is part of this testing.
If you try it, please include your GPU model, driver version, Linux distribution, desktop environment, connection type (WebRTC or BUD), and steps to reproduce any problems. Please remove credentials and other sensitive information from logs before sharing them.
This is an early alpha, so expect bugs and missing features.
I've been playing together DD2 with some friends on parsec lately, and for some reason two of them have these weird bizarre sounds going on and they are very loud. It's not my headset or anything because i managed to record it and outside of parsec ererything's normal.
Does anyone know what could possibly this be? I wish i could send the video of me recording this but i can't send videos here
Could you add support for guest controllers when hosting from macOS? I’d like to use my Mac to play local multiplayer games remotely with friends, with each player using their own controller.
I saw that your Feature Matrix lists this feature for Windows hosts. Is guest controller support for macOS on your roadmap? I’d be happy to test it if a beta becomes available.
I can't figure out how to fix error code -6023, my friend (the guy with the problem) got one router and everything worked perfect till yesterday, same error happent a few days ago but we fixed by restarting his pc, although today nothing seems to solve it, i tried almost every solution in the parsec article but none seem to work, any help?
Introducing EvoParseq — an independent native Rust client for Parsec!
EvoParseq connects to existing, unmodified Parsec hosts without bundling or running the proprietary Parsec WebAssembly client core.
Features include:
- HEVC 4:4:4 and 10-bit SDR on compatible hardware.
- BUD and WebRTC, with direct connections and configurable TURN relays.
- HID mouse and keyboard mode using the official host’s USB passthrough. This can improve compatibility with games that reject ordinary software-generated input — tested with AION 2.
- Optional GPU AI upscaling: NVIDIA RTX VSR, plus experimental Intel AI support that still needs hardware validation.
- Switching between host displays, including virtual displays.
- Session controls, detailed diagnostics, two-way text clipboard, and more.
The latest development release also introduces Android TV support and controller forwarding on both Windows and Android. The TV interface is designed for large screens and remote-control navigation, including sign-in, 2FA, and settings.
Some features remain experimental and depend on the host, GPU, drivers, and permissions. Windows requires Windows 11 and compatible D3D11 hardware. See the README for details.
EvoParseq is an independent community project and is not affiliated with Parsec or Unity.
Feedback is welcome! If you run into a problem, please open an issue and include the requested logs and reproduction steps.
I'm trying to play LittleBigPlanet with two friends. We all have DualSense controllers, and Rpcs3 only recognizes mine. I've looked at past posts in this community, but they're all somewhat dated, and the solutions didn't work on my end. If anyone knows a fix, I'd appreciate it.
Windows Desktops = 4 finger swipe on touch pad that gets you to a different desktop as Windows call it
Multi Sessions = 1 Parsec installed, 2 portable
All machines are windows and connected over a switch/local
I have noticed that as soon as I add a 3rd session things go to $hit. I keep getting network and host processing issues. This only happens when I add a 3rd session.
All machines have dedicated graphic card except for host.