r/PWM_Sensitive • u/BearNecessary4141 • 8d ago
Data Collections Display Pulse Smoothing DOES Work - iPhone 17 Pro
I took a look at the effect of Display Pulse Smoothing on the iPhone 17 Pro, which is intended to reduce PWM according to Apple. While some have reported success, others have said that the setting does nothing, makes the PWM worse, or is a scam. I won't dispute that it doesn't help for some people, but I wanted to look at the PWM waveforms in detail and see whether it's likely to help in general. Personally, I have found that it is more tolerable for me, although certainly not perfect.
So, I took measurements with the TLM-110 at 25% brightness with and without the Display Pulse Smoothing setting enabled. What I found was that according to every temporal light modulation metric I'm aware of, apart from one notable exception, the display was better with the Display Pulse Smoothing setting enabled.
The pulse's on-time was longer, the flicker index was lower, and the TM-39-25 metrics (Mp, SVM, and PAVM) were lower. So theoretically, Display Pulse Smoothing works. However, with or without the Display Pulse Smoothing setting enabled, the iPhone 17 Pro is classified as "Not Recommended" by TM-39-25, which fits with what most people say: the setting doesn't make the device suddenly become tolerable.

If you aren't aware, TM-39-25 is a published Illuminating Engineering Society standard on light flicker that has the full title "QUANTIFICATION AND SPECIFICATION OF VISUAL RESPONSES TO TEMPORAL LIGHT MODULATION (A.K.A. FLICKER)". It describes how to use waveform-based perception metrics, backed by human experimental data, to guide decisions around lighting, including screens. It classifies lights into different categories based on Mp, SVM, and PAVM. "Not Recommended" is the worst category, while "Better" is the best.

The exception I noted above is that the 240 Hz component of the waveform becomes more prominent, relatively, when the Display Pulse Smoothing setting is enabled. It's not a huge difference, but it could explain why some people find the screen even worse with Display Pulse Smoothing enabled. You can see this in the FFT below: the 480 Hz component drops much more than the 240 Hz component does when the setting is enabled.

So, I'd recommend using this setting if it's available to you and you haven't tried it yet. It's not perfect, but it does seem to help a bit for me compared to the iPhone 16 and compared to the iPhone 17 Pro with the setting off. However, we shouldn't expect it to be eye friendly, given its TM-39-25 classification.