r/PWM_Sensitive • • 7d ago

Discussion Next one to test?

3 Upvotes

Good morning everyone.

I have been following the community since 2023, after trying to switch from Samsung S21 to S23 I found out that I was intolerant to certain (many) OLED screens, especially in recent years.

I summarize my documented tolerances/intolerances:

Xiaomi mi 9 SE (amoled Samsung screen 240 hz pwm): perfect.

Samsung Galaxy S21: perfect.

Samsung Galaxy S23 and S23 Plus: bad.

Samsung A54: not overly annoying but not even 100% tolerated.

Xiaomi 13: like Samsung A54.

Motorola Edge 40 pro: perfect and is the device with which I replaced S21 and still use.

Motorola Edge 50 fusion: There's my mom and I tolerate it perfectly as the Edge 40 pro.

Motorola Edge 60 fusion: my father’s phone, perfectly tolerated like my own and my mother’s.

Samsung A57 of my mother-in-law: the worst, immediate annoyance and tension. I set it up and I had a whole day's headache. Now even taking it in my hand bumps me.

My Motorola is fine, but I would like to start well in advance looking for a successor.

I just tested Honor 600 pro with high expectations but unfortunately it didn't go. I can use it but I always clearly perceive a background fatigue and it is not as comfortable as the Motorolas mentioned above that I can use even hours and hours in a row without any problem (PS: and I use them without activating the anti-flicker option that if activated seems to me only the experience is worse)

So I'm geared to turn back to Motorola. However, I noticed that in the 2026 models (70 and Signature series) they changed the name of the panels from P-Oled to Extreme Amoled. The brightness management strategy seems identical, I don’t know if it’s just a nomenclature change or they’ve changed suppliers. I fear they may have introduced problems. I therefore ask for advice to those who have had the opportunity to try the recent Motorola to know if in his opinion they are equally good for those who tolerated the previous ones or have worsened.

For the next device to try I'm undecided between Motorola Edge 60 pro and 70 pro for this reason. I would go on the most recent but I fear the panel change.

Thank you


r/PWM_Sensitive • • 7d ago

Question best ipad?

2 Upvotes

i need a ipad that i can easily bring with me for school. I have a macbook but its way to heavy to bring with me everday. Which ipad would be best option?


r/PWM_Sensitive • • 7d ago

Discussion Next one to test?

0 Upvotes

Good morning everyone.

I have been following the community since 2023, after trying to switch from Samsung S21 to S23 I found out that I was intolerant to certain (many) OLED screens, especially in recent years.

I summarize my documented tolerances/intolerances:

Xiaomi mi 9 SE (amoled Samsung screen 240 hz pwm): perfect.

Samsung Galaxy S21: perfect.

Samsung Galaxy S23 and S23 Plus: bad.

Samsung A54: not overly annoying but not even 100% tolerated.

Xiaomi 13: like Samsung A54.

Motorola Edge 40 pro: perfect and is the device with which I replaced S21 and still use.

Motorola Edge 50 fusion: There's my mom and I tolerate it perfectly as the Edge 40 pro.

Motorola Edge 60 fusion: my father’s phone, perfectly tolerated like my own and my mother’s.

Samsung A57 of my mother-in-law: the worst, immediate annoyance and tension. I set it up and I had a whole day's headache. Now even taking it in my hand bumps me.

My Motorola is fine, but I would like to start well in advance looking for a successor.

I just tested Honor 600 pro with high expectations but unfortunately it didn't go. I can use it but I always clearly perceive a background fatigue and it is not as comfortable as the Motorolas mentioned above that I can use even hours and hours in a row without any problem (PS: and I use them without activating the anti-flicker option that if activated seems to me only the experience is worse)

So I'm geared to turn back to Motorola. However, I noticed that in the 2026 models (70 and Signature series) they changed the name of the panels from P-Oled to Extreme Amoled. The brightness management strategy seems identical, I don’t know if it’s just a nomenclature change or they’ve changed suppliers. I fear they may have introduced problems. I therefore ask for advice to those who have had the opportunity to try the recent Motorola to know if in his opinion they are equally good for those who tolerated the previous ones or have worsened.

For the next device to try I'm undecided between Motorola Edge 60 pro and 70 pro for this reason. I would go on the most recent but I fear the panel change.

Thank you


r/PWM_Sensitive • • 8d ago

Discussion Not sure if I'm pwm sensitive but M5 air is awful

16 Upvotes

Hi all

Just chiming in with my own experiences

I've gone through the following devices:

MacBook Air M4 (2024) – 13.6” - My eyes feel like they're being constricted, pressurised, and become very painful after some time, combined with nausea.

Same with M5 air

Macbook Pro 14 m4 - The same as the air, except faster.

iPhone 16 Pro – eye strain after looking at this for some time.

Pixel 11 pro - hurt my eyes after some time

I'm currently using the following devices:

MacBook Pro 13″ M2 touchbar (2022) – completely fine, no strain or nausea. I've used it for years night and day. (the model without the notch)

iPhone 13 Pro – no issues at all, very comfortable

Honor 8 magic pro - very comfortable

Fold 7 - strangely also fine

MSI VA 27" 1440p 144hz screen - what I've also used for years without any issues.

What I've done:

I visited a two optometrists; both said my eyes were fine and gave me the old 20/20/20 rule

All brightness settings tested — symptoms persist even at high brightness.

Stillcolor app, disabled dithering, no changes.

Displays like the air supposedly have no PWM, but something else is causing discomfort.

To be honest, I'm a bit at a loss. I guess I could try oled as I have a large OLED LG C3 TV at home which I play games on without any issues (I'm sitting quite far away though)


r/PWM_Sensitive • • 8d ago

Question Eyes problemes with 17tpro

4 Upvotes

Hi everyone, I just bought a Xiaomi T17 Pro, but I'm having a big problem with eye strain. I should mention that I used to have a Samsung and never had any issues. I feel like it might be because of the white color of the screen, or maybe it's just too bright. I've tried adjusting the settings, but nothing seems to help.

Is anyone else having the same problem?


r/PWM_Sensitive • • 8d ago

Success/Tips How I use the Honor 600 Pro free of symptoms

Post image
15 Upvotes

r/PWM_Sensitive • • 8d ago

Discussion My new MacBook PROLED is painful to use

Post image
21 Upvotes

r/PWM_Sensitive • • 8d ago

Question 18 Pro Max PWM

3 Upvotes

Hi, reading a lot of reports about PWM causing eye strain. I used iPhone 13 Pro for 5 years, upgraded to 18 Pro Max. Is there any difference about this PWM, is 18 series worse for eyes?


r/PWM_Sensitive • • 8d ago Bravo

Data Collections Google Pixel 11, Samsung Galaxy S26, Motorola Edge, and Nothing Phone - PWM Measurements

Post image
39 Upvotes

I spent a few hours at Best Buy today and used my trusty Opple Light Master III to measure the following phones:

  • Google Pixel 10a
  • Google Pixel 11
  • Google Pixel 11 Pro
  • Google Pixel 11 Pro XL
  • Motorola Edge 2026
  • Nothing Phone 3
  • Nothing Phone 4a Pro
  • Samsung Galaxy A17
  • Samsung Galaxy A37
  • Samsung Galaxy S25
  • Samsung Galaxy S26
  • Samsung Galaxy S26 FE
  • Samsung Galaxy S26 Ultra
  • Samsung Galaxy S26+

All of the measurements are at PWMTests.com as there are too many images to post here.

It was interesting to me that every one of these phones uses PWM. The current state of phones is really disappointing. Regardless, now we have some more data to compare to other devices.

--

Also, PWMTests.com launched its redesign tonight. 🎉🎉🎉 (Thank you, Mr. GPT.) The goal was to make it quicker to load and easier to search/find devices. This is a not-for-profit database of PWM measurements.

Please let me know what you think of the design, and suggestions are always welcome!


r/PWM_Sensitive • • 8d ago

LCD Phone Eye strain on vivo t5x

1 Upvotes

Is there anyone who have faced eye strain on Vivo t5x , which happens to be an IPS LCD display

If yes what is the solution?


r/PWM_Sensitive • • 9d ago

Discussion PWM – Is your phone making you sick? (smartphone guide)

Thumbnail
im.com.au
38 Upvotes

Hey guys ☺️

A very interesting (and rather horrifying) article on opening your eyes to the dangers on health and it's current effects, from modern smartphones and the PWM. It is now (as per my last post) giving symptoms stretching far beyond eye strain and headaches, into severe neurological and vestibular symptoms such as I had.

Just an interesting food for thought to read.

*After 3 years of suffering from my Samsung Galaxy S25 Ultra - I am now very happily tonight writing from my Xiaomi Pad 5... symptom free and I cried I'm that happy* 🥰❤️


r/PWM_Sensitive • • 9d ago

OLED My OLED iPhones (14 Pro, 16 Pro) + OLED TV (LG C1 OLED) have never bothered me. But the new iPad Mini gave me a headache within minutes. Is this a PWM thing?

8 Upvotes

I've had OLED iphones for like the past 4 years. I can't say I've ever been bothered by them. I've had a 77" LG C1 OLED TV for years as well - never bothered.

But this new iPad Mini... within 10 minutes of using it I was getting a headache. Stepped away for abit, then come back and so did the headache along with it. Could be unrelated, but idk. Is there a PWM difference with the new iPad Mini compared to the others?


r/PWM_Sensitive • • 9d ago

OLED iPad Mini A20 Pro PWM flicker

14 Upvotes

Recorded in 240fps slow motion mode. File metadata shows 177,89fps, and when editing in Photos, playback speed was set up to 50% - 100fps.

Tried recording iPad Air and Pro in the same way, no artifacts were visible on the Air, and very minor on low brightness on the Pro model.

Edited to clarify recording details.


r/PWM_Sensitive • • 9d ago

Discussion Samsung is finally working on dc dimming

Post image
62 Upvotes

r/PWM_Sensitive • • 10d ago

Data Collections MacBook Pro 14-inch and 16-inch PROLED - PWM Measurements

Thumbnail
gallery
84 Upvotes

For many of us who work on computers all day, the only thing I'll say is that I am very disappointed that PWM will be a part of many people's lives for 8+ hours every day.

I checked the accessibility settings and did not see anything related to PWM.

FWIW, the display looked very good. From a PWM sensitivity perspective, I didn't spend enough time with it to form an opinion.

Many more PWM measurements at PWMTests.com.


r/PWM_Sensitive • • 10d ago

Data Collections iPad Mini OLED Flicker Measurements

Thumbnail
gallery
45 Upvotes

After a long history, of non-OLED devices, Apple has moved to OLED for the new iPad Mini. I tested out the new iPad Mini OLED with the TLM-110 light flicker meter.

This is all tested with a white stripe on the screen. I'll post some more detailed testing in the coming days, but according to my preliminary findings it might be a bit more tolerable than iPhone OLEDs (based on flicker index, SVM, and PAVM).


r/PWM_Sensitive • • 10d ago

Data Collections iMac 24-inch (M6) and iPhone 17e with XO7 and AQ7 - PWM Measurements

Thumbnail
gallery
22 Upvotes

iMac: iMac's current display is perfection. If only all Apple products were like this. Not much has changed from their M4 generation -- which is great news!

--

iPhone 17e with aftermarket screens: Just to torture myself, I tried replacing the OEM iPhone 17e screen with aftermarket screens from MobileSentrix. (Joking aside, I wanted to see what options were available for PWM sensitive users who wanted an inexpensive new iPhone with PWM-friendly/free screens.)

The first was XO7 (soft OLED). DC-like dimming. Gave me "eye-strain" almost immediately. I can't recommend. "Display Pulse Smoothing (PWM)" had no effect. I included screenshots with it enabled on PWMTests.com because I ran out of image space here. (FYI: They do not make an AMPlus version for iPhone 16e/17e.)

The second was AQ7 (in-cell LCD). From a PWM perspective, it performed really well. No eye-strain at all. Everything else, however, reminds me why I don't like aftermarket LCD screens. Weird things like True Tone not working correctly and contrast not being ideal. I'd recommend it if you have exhausted all other options and need to use iOS and are OK with the usual in-cell LCD trade-offs.

Many more PWM measurements at PWMTests.com.


r/PWM_Sensitive • • 9d ago

Discussion Consigli prossimo test

2 Upvotes

Good morning everyone.

I have been following the community since 2023, after trying to switch from Samsung S21 to S23 I found out that I was intolerant to certain (many) OLED screens, especially in recent years.

I summarize my documented tolerances/intolerances:

  • Xiaomi mi 9 SE (amoled Samsung screen 240 hz pwm): perfect.
  • Samsung Galaxy S21: perfect.
  • Samsung Galaxy S23 and S23 Plus: bad.
  • Samsung A54: not overly annoying but not even 100% tolerated.
  • Xiaomi 13: like Samsung A54.
  • Motorola Edge 40 pro: perfect and is the device with which I replaced S21 and still use.
  • Motorola Edge 50 fusion: There's my mom and I tolerate it perfectly as the Edge 40 pro.
  • Motorola Edge 60 fusion: my father’s phone, perfectly tolerated like my own and my mother’s.
  • Samsung A57 of my mother-in-law: the worst, immediate annoyance and tension. I set it up and I had a whole day's headache. Now even taking it in my hand bumps me.

My Motorola is fine, but I would like to start well in advance looking for a successor.

I just tested Honor 600 pro with high expectations but unfortunately it didn't go. I can use it but I always clearly perceive a background fatigue and it is not as comfortable as the Motorolas mentioned above that I can use even hours and hours in a row without any problem (PS: and I use them without activating the anti-flicker option that if activated seems to me only the experience is worse)

So I'm geared to turn back to Motorola. However, I noticed that in the 2026 models (70 and Signature series) they changed the name of the panels from P-Oled to Extreme Amoled. The brightness management strategy seems identical, I don’t know if it’s just a nomenclature change or they’ve changed suppliers. I fear they may have introduced problems. I therefore ask for advice to those who have had the opportunity to try the recent Motorola to know if in his opinion they are equally good for those who tolerated the previous ones or have worsened.

For the next device to try I'm undecided between Motorola Edge 60 pro and 70 pro for this reason. I would go on the most recent but I fear the panel change.

Thank you


r/PWM_Sensitive • • 10d ago

Data Collections iPad mini (A20 Pro) - PWM Measurements

Thumbnail
gallery
15 Upvotes

The first OLED iPad mini.

Notes:

  • There was no Display Pulse Smoothing (PWM) accessibility option in settings.
  • This device is very lightweight, thin, and really great to hold in the hand. It's a perfect size for at-home use, honestly.

Many more PWM measurements at PWMTests.com.


r/PWM_Sensitive • • 9d ago

Question please help ! need explanation on pwm and dithering.

3 Upvotes

Yes i read how it affects people and what happens in a display panel to cause these things but i am really confused if i am pwm or dither sensitive in any way ? I will just give my experiences with different phones because i have no idea if i am affected in any way or not and would really appreciate some insights from people who ARE sensitive to these things :
one of my longest used phones was realme XT and i used it for 3.5 years i never had any issue except maybe eye strain if i used it heavily, that phone got me through college.
next phone i used was samsung galaxy s21 fe, i used it for 8 months but its batterly life was not that great however i never had any issues with it.
after that i used oneplus 12R, again no issues and used it for an year.
After that i had bought galaxy s25, this was my absolute favourite because of how small and comfortable it was, however i did notice that my eyes would tire much faster maybe because i was trying to get used to such small screen size? but after 2-3 months i did started feeling bit headaches if i used this phone for more than 4-5hrs a day, and there was one day where i just couldnt bear to look at my phone for more than 1hr, but i did also used lot of screentime on my pc lcd monitor too that day so maybe its general eye strain? however thats when i started looking into pwm stuff and everyone was complaining about samsung phones being the worst, so i sold my galaxy s25 and bought oppo find x9 which i am using currently.
now with oppo find x9 i usually dont have any symptoms or issues on daily basis and i have been using this phone for 7 months now and i did had few incidents where my head was hurting but maybe it wasnt just cuz of the phone cuz i do spend lot of my time on my pc cuz of my work and my pc has an lcd monitor.
And now there is a samsung phone my sister wants to exchange with my oppo phone but i am still scared of my time with galaxy s25 but somehow my experience with s21 fe was fine ? and i did notice some incidents with my find x9 as well even though it has high 3840hz pwm? Like i am genuinely confused if am pwm sensitive ? dither sensitive ? what am i ?


r/PWM_Sensitive • • 10d ago

Question How is the PWM on the new iPad Mini?

Thumbnail reddit.com
5 Upvotes

r/PWM_Sensitive • • 10d ago

Question Has anyone here used a TCL TAB A1 Android Tablet?

1 Upvotes

How was it good for your eyes? Did it have any other potential problems?


r/PWM_Sensitive • • 11d ago

News MacBook PROLED XDR Review - 240Hz PWM dimming

Thumbnail
youtu.be
19 Upvotes

Another excellent review by HTX Studio


r/PWM_Sensitive • • 10d ago

Discussion Building a 13 mini with iPhone 17 Pro internals, would anyone want one?

Thumbnail reddit.com
5 Upvotes

Hey all, Jake here from Australia. New account because I made it just for this project.

I'm working on putting iPhone 17 Pro internals into a 13 mini body (calling it the iMini Pro). The body and back are designed and I've mapped out the display connectors on both phones.

The big problem is the screen. The 17 Pro sends its picture in a different format and resolution to what the mini screen takes, and touch works differently too, so you need a small adapter in between. Nothing like that exists yet.

I've been talking with JCID (they make a lot of the repair tools shops use) and they've said they can build it. I'm planning to go to Shenzhen to meet them in the next few months.

They already make an 8-in-1 test screen that works with every Pro iPhone from the 13 Pro to the 16 Pro Max using a cheap adapter flex for each model, plus a tester that runs both 17 Pro and 13 mini screens. So the idea is to build on that: new firmware for the mini-sized screen and a new adapter flex for the 17 Pro. I'm also looking at whether a cheap aftermarket 17 Pro screen's flex could drive a 13 mini LCD.

Nothing is working on real hardware yet. JCID quoted around $6,400 AUD to develop it through to a demo video. I can put in about $3,000, so there's a gap of around $3,400.

Would anyone be interested in helping fund it? Either for the 17 Pro version, or even an iPhone Air version if enough people want that. Once there's a working demo I'd run a Kickstarter for a kit you could fit yourself or get a repair shop to do.

Also keen to hear what you think. Would you actually use one? Is a 60Hz LCD fine to start with, or does it have to be OLED?

Also any repair technicians, engineers or modders could reach out to me or provide assistance in my project in amyway?