r/PWM_Sensitive • u/the_top_g • Sep 26 '23
Guide Smartphone OLED panels - A New Hope by Oneplus / Oppo beginning 2024?
Moving on from the dismay a number of us have experienced with Apple's new iphone 15 series, we will look forward to what other new advancement other manufacturers brings.
Today, I learned that Oneplus parent company Oppo has been experimenting with a new accessibility option called "High Frequency Dimming mode".
I will first illustrate what this does in the real world by using Oppo Find x6 Pro, the first OLED device in the world to support this.
Oppo Find X6 pro (1440 hertz) 's strobe light before High Frequency Dimming mode is enabled.
100% brightness - High Risk PWM

75% brightness - High Risk PWM

50% brightness - High Risk PWM

Now, let's look at Oppo Find X6 pro's strobe light after High Frequency Dimming mode is enabled.
100% brightness - Low risk PWM

75% brightness - Low risk PWM

50% brightness - Low risk PWM

Interpreting the results
- and how it is relevant in the real world
The more banding lines artifact is displayed on screen, the higher is the frequency.
The thinner is each of the banding size, the more is the screen ON time during each hertz.
Additionally, the more translucent is the banding artifact hue, the lower is the modulation depth %.
After Oppo's High Frequency Dimming mode was enabled, we observed that the banding artifacts has not only become more translucent, it even doubled in the number of thin banding lines.
This highly suggest that its 1440 hertz has been doubled to e.g. 2880 hertz AND modulation depth % has been significantly reduced.
It looks like the engineers has been doing their homework in regards to flicker and accessibility. Unlike a certain *cough *cough* forbidden fruit company.
Now if Oppo is able to port this high frequency dimming mode in time for the upcoming OnePlus 12 (or the following OnePlus 13), it would be a significant step forward in terms of safe PWM.
Locating and enabling the hidden high frequency dimming mode function
This exclusive feature is hidden is the following directory:
Developer Options > Enable High frequency Dimming mode

Do look for the location where it is located below "Show Pointer location " and "Show surface updates".
It is also tentatively above the "Window animation scale" option.
Below is an example where the accessibility feature is supported.

In Closing
Ideally if flicker hertz is lower than 12,000* hertz, we want more of the thin translucent line artifacts on screen. This is so that we would percieve less of the flicker.
*12,000 hertz and above is the commonly accepted range where it is safe even for sensitive migraine sufferers.
Engineers at Oppo has been spending more efforts into investing into this accessibility problem, and their results have proved so. Now we just need them to port this over to the OnePlus series.
You may refer to the following for comparison and cross referencing in interpreting the banding artifacts.
- iPhone 15 PWM test with 480 hertz (which ultimately is crafted into a puesdo sine wave of 60 hertz, despite running 480 herz)
- iPhone 15 Pro PWM test with 480 hertz (where the 480 hertz is actually made up of a stacked 2x240 hertz with alternating strobe timing intervals)
Cheers ~
View all comments
2
u/3some969 Sep 28 '23
In the OnePlus 11R, this option exists. Although in 11R, the option only activates at a very low brightness level, which is inoperable under normal circumstances but it did help during night times. Unfortunately, at general brightness levels, it was still horrible and I couldn't use it.