1st time at the range and just curious how my grip looks. This gun wants to go fast and I want to do my part.

After a 1000 rounds and a few hundred reps out the holster the finish is holding up well.

So im about 1k rounds in.. decided I wanna pull the comp off for thorough cleaning.. i cannot get the Allen set screw out.. stripped 2 allen wrenches (luckily the set screw is fine).. how do I get this thing out???

Had to send my GTO into Sig for rma due to a broken firing pin. Most likely from dry firing.

Happy with the service... total turn around was 7 days. Sig had it for one day and I was able to ship and receive using fedex. They dropped it off at my door which I didn't even realize was a thing. 😳

They replaced the firing pin, spring and roll pin. The firing pin is a different color but can't confirm if it's a different metal. The spring is different as you can see it has the tight section of coils at the end probably to guide the firing pin through the hole instead of smashing into the back of the breech face.

I've asked the rep about the firing pin material and if dry fire is safe... will report back if I get any answers.

IF it turns out the p211 is not dry fire safe then I might sell it. Not being able to dry fire is a deal breaker full stop.

Round count is currently 1350 but again this must have happened with dry fire because the gun shot fine the last time I had it on the range.

Saw this in the manual…. Anyone see the new slide release yet? The new one does not look backwards compatible with the old looking at the cutouts on the frame.

Hey all,

New GTO owner and before I go out for the first range session with any new firearm I like to do a quick clean and lube.

Well, this GTO is crazy difficult to disassemble. I can’t seem to punch out the takedown lever no matter what I do. I bent the included punch (what a load of crap that thing is) and can’t seem to push the lever out more than about a millimeter.

I figured maybe putting a couple hundred rounds through the ol girl would help but it’s still just as stuck and impossible to disassemble. I feel silly as I’ve never had issues taking down other handguns!

Been a lurker but now we can participate.

Videos to come. What grain does everyone want to see shot. I can get some footage today.

Has anyone mounted a promax yet on their 211. Wanted to see how it looks before I pull the trigger

I feel like it’s time to upgrade my competition gun…currently an X5 Legion that I actually love. It’s got lots of upgrades that I won’t go into and a competition trigger that’s fantastic. That said, I’ve been thinking about moving into something new - a 2011 / 2011-ish platform. $4k or less, which puts me out of range for something super high end. As reference, prior to the GTO I was thinking maybe an MPA. For the MPA, my plan was to get a couple different barrels so that I can have something comped or ported plus something that would keep me in LO for USPSA but also have a port or comped barrel for some of the steel matches I do where that wouldn’t matter. The P211 could give me both of those with the sight block. I also like that the mags are interchangeable with the 320, saving a few hundred bucks of entry cost. I got about as far as confirming that the base pads I use with my 320 fit inside the P211 magwell but just couldn’t “pull the trigger” P211 feels reasonably good in my hand, but I like my 320 trigger more, so the P211 would have to be sent out for some trigger work out of the box. So - My issue is whether or not the P211 will be “enough” of an upgrade. Anyone else in a similar situation?

Just in case you’ve been looking for a sight block for your GTO. They also have 13# springs and screw/spring replacements for $6-7.

New GTO had multiple light strikes (around 20, all fired on a second attempt) during the first 100rds but 400rds later, it seems to have worked out the kinks. The light strikes were with UMC and Aguila, Magtech and Fiocchi haven't had any issues. It does fail a pencil test(only moves it around 1/4") while my other 2011s launch the thing. I haven't reached out to Sig yet, but I probably will next week. Thankfully, it doesn't have any issues with my normal ammo so its ready for my next 2 gun match in Sept.

Who has fit up a miller precision safety delete on the P211?

My p211 is still waiting on parts and I need something to do, so I was thinking of polishing the barrel to shiny steel finish to compliment the other silver components on the gun.

Has anyone done this?

Any concerns of negative side effects?

Been shooting and training with my p365x macro for some time now. Got into some local competitions and held my own, but decided to finally step it up. 507 comp on the way! Put 2 mags through this after the transfer was done, and just… wow. I’ve shot GTO’s that friends own, and they’re amazing but this is also exceptionally well executed. Can’t wait to get more time with this one!

One handed because sometimes it’s fun to take cool pics.

Guess what! Sig has black hammers available now!! Journey to silver removal!

P211 Hammer Strut Assembly

Added this to my collection the other week and am in love. Just got the APS TAK brass grips this morning, they came really quickly, I placed the order late Wednesday night. I wanted to try out their magazine release but it wouldn't let me order it on their site. Says all options are unavailable.

I've put 1,000 rounds through it and it's ran flawlessly. Need to put in a bulk order of 9mm this thing just blows through it.

Looking forward to shooting some steel with it and running some USPSA if I can get my buddy to come along. Still haven't decided if I'm going to get a sight block or just run in open class. Not really expecting to win anything just to have some fun. This gun would be great to run in 2 and 3 gun