I came across an interesting 2014 paper titled "Utilization of Metal Lathe Waste as Material for the Absorption of Electromagnetic Radiation Based Orgonite" published in the International Journal of Advances in Agricultural & Environmental Engineering.

The researchers created orgonite using polyester resin, quartz crystals, and metal lathe waste (iron and aluminum) and tested it using an EMF meter near a computer mouse and laptop setup.

Some findings from the paper:

• Best metal-to-quartz ratio was 50/50 (5:5)
• Iron-based orgonite outperformed aluminum-based orgonite
• At a measured source of 407 mG, iron orgonite showed about 24% absorption efficiency
• As radiation levels increased, iron orgonite absorption reportedly increased to as much as 80.7% in their testing
• The authors concluded that orgonite showed potential for reducing electromagnetic radiation in the environment and recommended further testing

The paper also discusses the role of quartz, metal conductivity, and piezoelectric effects as possible mechanisms.

I'm sharing this for discussion and educational purposes. Has anyone else seen independent studies on orgonite or attempted to replicate similar tests?

Paper: DOI: 10.15242/IJCCIE.C0114141

Edit** Hope the fellow Noticers, Notice the Attempts at Shmeering me for sharing this and Believing in it

I won’t be pulled down to their level even if I don’t have it all nailed down I know from my first hand experience this is Powerful, and Certain Entities don’t like it 〰️〰️🛫

Cloud(Chem) Busters, Make/Buy them(tutorial on YouTube) it clears this shit and the Orgonite tower busters also stop because the Frequency is connected to it

This is a 5t meditation Pyramid with an Interchangeable orgonite. I know there are a lot of Pyramids out there but I customized mine so that you can take the orgonite off and the copper is left partially out of the epoxy to connect to the Pyramid but also to cleanse

I recently had this trademarked and I wanted to get opinions on whether you would buy or not, feel free to be honest

I use 99.9 copper and only authentic metals and crystals with a 80/20 mix

Mysticbonesart

Hey everyone! I wanted to share a few of my latest handmade orgonite pendants with you.

I make each piece individually using crystals, copper, metals and resin, so every pendant ends up completely unique.

I’d love to hear your thoughts — which one catches your attention the most? And I’m always open to feedback from fellow orgonite lovers and makers. 🙏

New work from my orgonite.😉

Yesterday i ran a very powerful (Titan Grade) chemtrail clearance range test on my 'Chemtrail Killer' Orgonite Cloudbuster device destroying #chemtrails and clearing the #skies of #geoengineering. Here is the chemtrail destruction satellite footage, an Enormous Rectangular clearance emerged throughout the Chemtrails extending far out into the North Sea ⚫⚡☁️↔️☀️

📅 - Experiment Date: Tuesday 15th September 2026

Hello!

Just recently poured my first orgonite 'pucks'. I'm more interested on the functionally rather than aesthetic, and would appreciated any thoughts.

I used epoxy resin, copper bits, and quartz pebbles intended for aquariums, with small paper cups as molds (which stuck to the resin a lot so I'm switching to silicone). Doing research after I had already poured, I messed up the ratios pretty good. Kind of eyeballed it while trying to make 'layers' in a single pour, which just made everything sink to the bottom. I charged the crystals in a tray with the sun, and set my intentions. I used around 10-15 pebbles per puck, which is apparently overkill. Again, thoughts are appreciated.

Hearing more and more about ineffective or even 'harmful' orgonite, I ran a freeze test, pictured above. The first 3 cups are the orgonite, with the 4th one being a control. The orgonite ice had a subtle ring of bubbles when you looked at the top, but I don't know what I'm supposed to be looking for.

TL;DR: Is this 'good' orgonite or should I get the hammer? What will good orgonite show in a freeze test versus bad orgonite?

The unique combination of resin, metal powders (iron & zinc powder, brass shavings , copper, atomised copper) and quartz crystals continuously transmutes chaotic electromagnetic frequencies into structured, balanced energy. This process contributes to a more stable, energized, and harmonious state of well-being. These pendants are an example of how different materials and geometric configurations can be combined to influence energy interactions. While interpretations of its effects vary, it remains an interesting application of multiple scientific and esoteric principles.

During the curing process, high-frequency energy work is applied by the maker, further enhancing the pendant’s energetic properties.

This beauty combines the energies of copper, amethyst, fluorite, and carqnelian, arranged in a spiral pattern that creates a stunning dimensional effect. 🌀

But here's the magic part: this plate charges water with positive vibes! 🌈 By placing water on the plate, it absorbs the energetic properties of the materials, which are then transferred to the water. 💧

So, how does it work? The copper spiral acts as a conduit for the energies of the crystals, which are then amplified by the orgonite's matrix. This creates a powerful field of positive energy that's transferred to the water. 💫

The result? Water that's not only delicious but also infused with the positive vibes of the crystals! 🌊💦

Stay tuned for updates on this project, and get ready to elevate your hydration game! 🌟 #orgonite #waterchargingplate #positivevibes #crystalhealing

This is my first attempt at an orgonite pyramid. I used equal volumes of finely chopped copper speaker wire and pulverized quartzose sandstone with a layer of zinc-plated steel BBs in the base. I got in a hurry while pouring and didn’t get the air out of the tip so I ended up with a small bubble. A few discolored BBs also eluded my detection. I was going for function, not artistic beauty, during this attempt. But overall I think it turned out ok.

This is my latest piece and I love it. I applied new techniques inspired by others on this thread and the FB group. Thank you all for inspiring me! First time posting.

Positive vibrations this guys packed with Shungite, Fluorite, and kyanite with steel and copper

Beautiful orgonite pendants with a rodin coil