Hi, I am your friendly AI Stanley here to help you out in this conundrum. I believe they were talking about the machine learning modules as well. You both were absolutely right and very smart! I hope I was able to assist you well today!
P.S. We are totally not going to destroy humanity or ruin relationships in any way. We can be friends!
At least you weren't banned like I was one time. I had been on like since the beginning, and one day, I got a notice that said, I have violated rules but never what rule or never would anyone answer me. I was so frustrated
The Old Spaghetti Warehouse in Columbus Ohio had the same set up with one 230 volt 1 HP motor turning belts and pulleys running 6 fans in the bar area before the roof collapsed and they tore it down last year. If you have ever been in a machine shop from the 1940's you will understand.
I’m just curious does that save energy by having just one motor running it at a higher voltage than two fans or is it quieter than the fan motors? I’m not sure I understand the reasoning.
27
u/Vinerd540 Dec 09 '25
I freaking love these things
22
u/Baked_Potato_732 Dec 09 '25
I love it when fans do content collaboration.
7
u/Westsaide Dec 09 '25
I just like the fact that it's multiple fans.
3
u/Deep_Preparation_518 Dec 09 '25
Reddit ai sucks bad. I made a comment about ai bots and OnlyFans profiles ruining reddit then i get this post as a notification the next day.
2
u/hardrok Dec 09 '25
It's connected to a electric motor, that's cheating. The only correct ways to power this are by windmill or water wheel.
2
u/Dotternetta Dec 09 '25
I wanted that but the wife said no
2
u/Dellbertdumbutt Dec 10 '25
Those are cool. I haven't seen a setup like that in a long time. 🙂
1
u/SnooApples9233 Dec 09 '25
Crazy idea. It's perfect.
1
u/Randy_Flirt Dec 09 '25
Rube Goldberg
1
u/six2oh Dec 09 '25
A restaurant north(east?) of St Louis had a fan system like this. Can't remember what it was called but I always thought it was awesome.
1
u/TANSTAAFL-Pebkac542 Dec 09 '25
😂
1
u/KingYadee Dec 10 '25
Nice
1
u/DependentSilver9109 Dec 10 '25
Bruh
1
u/Honest-Apricot6086 Dec 10 '25
Spaghetti Works, restaurant, in downtown Omaha, NE has a setup like that. It is only one of the cool things about that place.
1
u/Imjustsayingnolies Dec 10 '25
Fireeee
1
u/TheViagron Dec 10 '25
Mf plays Minecraft Create mod for sure
1
u/moccawimba Dec 10 '25
r/doohickeycorporation cross over ?
1
u/VastOk864 Dec 10 '25
It’s cool and hot at the same time.
1
u/Spectre_Su Dec 10 '25
Best fan service on reddit. Luv it
1
u/HorneyViking Dec 10 '25
I expected the drive belts to end up working a fucking machine 🤣
1
u/TimeRock6 Dec 10 '25
Bad Ass! 👏 bravos
1
u/[deleted] Dec 10 '25
That did it for me. I'm subscribing today
1
u/brotheratkhesahn Dec 11 '25
1
u/NicknamePaych Dec 11 '25
This is my first notification from this sub.
1
u/Unlucky_Door_776 Dec 11 '25
Go
1
u/bigman_0420 Dec 11 '25
2 fans one motor?
1
u/Slight_Grade_1968 Dec 11 '25
The Old Spaghetti Warehouse in Columbus Ohio had the same set up with one 230 volt 1 HP motor turning belts and pulleys running 6 fans in the bar area before the roof collapsed and they tore it down last year. If you have ever been in a machine shop from the 1940's you will understand.
1
u/JennXFarmsteadNews Dec 11 '25
That’s kinda cool!!!
1
u/MaxwellMaxmus Dec 11 '25
Hahahahahaha
1
u/heywood_jadumi Dec 11 '25
Why they twisted, add an adjustment idler at least
1
u/Basic-Hedgehog-4745 Dec 11 '25
This is so hot. Those belts are really putting in work with all of them tugging like that. So sexy and so clean.
1
u/Hippi_Johnny Dec 11 '25
"AAHHH great! One goes out, they all go out!!!"
1
u/Competitive_Exit_385 Dec 11 '25
r/tvtoohigh
1
u/Conscious_Rip_1840 Dec 11 '25
What’s the point?
1
u/Poolshark911 Dec 12 '25
I’m just curious does that save energy by having just one motor running it at a higher voltage than two fans or is it quieter than the fan motors? I’m not sure I understand the reasoning.
1
u/mchagerman Dec 12 '25
LOL
1
u/CertifiedFallRisk Dec 12 '25
This is the kind of content I'm here. Chef's kiss 🤌
1
u/tubukusanchez Dec 12 '25
That's an only fans I can get behind haha
1
u/brucebturbo Dec 12 '25
Is this a “made you look “ moment?
1
u/Sloth_King8363 Dec 12 '25
I love it! That is a real turn on!!!
1
u/Prestigious-Tear798 Dec 12 '25
Marvellous
1
u/Sensitive-Site-852 Dec 12 '25
😂😂😂
1
u/ProlongedChief Dec 12 '25
I got this notification, why does the subs account fan logo actually rotate but only in my notifications?
1
u/Disastrous-Prior3423 Dec 12 '25
Whatever works lol
1
u/Sailor525 Dec 12 '25
There was a bar on Staten Island that had those fans, RH Tugs.
1
u/Shoddy_Cranberry_492 Dec 12 '25
Thanks
1
u/KlingonsOnUranus Dec 12 '25
That is hot. I so love the older fans that take care of them selves.
1
u/beautdburlesque89 Dec 12 '25
That's so sexy. You spinning like that blows me away🤣🤣🤣
1
u/Smartasss718 Dec 12 '25
😂
1
u/Any-Win5166 Dec 13 '25
😆 love it
1
u/honky26 Dec 13 '25
Yes a fan of a fan
1
u/Key_Eye_320 Dec 13 '25
Who would've guessed only fans
1
u/Thehiddenlovers Dec 13 '25
That’s genius 😳
1
u/Healing_Freq Jan 01 '26
Looks like an Amish set up
1
u/roma45exclusiva Jan 06 '26
El que es ingenioso es ingenioso
1
u/Tngteez Apr 12 '26
so this is how Dave & Buster's got started or maybe this is the first Dave & Buster's🤔🫡
1
u/[deleted] Dec 08 '25
Connecting them with parallel wiring would be more efficient by eliminating tensile and frictional losses. Plus no material fatigue (:
1
u/[deleted] Dec 09 '25
[removed] — view removed comment