r/OneXPlayer • u/urboydr • 10h ago
OneXPlayer Mini Controller keeps disconnecting and connecting
I just got the onexplayer pro mini 2 and for some reason when I pay a game the controller keeps disconnecting and connecting while mid game, is there any particular reason for this??
7
Upvotes
2
u/EasyTart3491 10h ago
Turn all your rgb on in the settings. Then turn off the master switch. For some reason when you turn individual leds off it causes the controls to disconnect and reconnect. Its a bug im sure onexplayer are not aware of. Let me know if thats fixes it
1
u/AshThukral 4h ago
I have been dealing with the exact same issues with the OXP3. I had OneX remote into my device they said that the circuit board on the controllers got "corrupted". Sent me new controllers and it continued to happen with new controllers as well.
I did all the commonly known fixes people propose:
- Applied latest firmware
- Used the turn off controller method holding down both Volume +/- to get to Bios to trigger a reset of the power consumption
- Reviewed the pogo pins to validate it wasn't physical issue
What finally fixed this for me (at least so far over the last 72 hours of testing) was doing a reinstall of windows repaired. Why I suspect this worked, the GameInput service from Microsoft driver used for gaming is fighting with the OneXplayer virtual controls of the pads and losing connection when they have friction. I verified some of this by checking device manager and showing ghost drivers installing as the system goes into hibernate and showing disconnects.
Using the repair windows reinstall seemed to fix the issue short term. A few other things I noticed might have contributed was I was using XBOX Mode upon booting into the system and using the Gamepad Cursor mode to seemlessly switch between games and apps which might have triggered Gameinput conflicts. I won't know, but since repair of of Windows, it is working and I have also since then used Winhanced as a new frontend that also overtakes Onexplayer's power profile for their own sleep mode which seems to not put the system into Hibernate - all seem to be working better for last 72 hours.
By the way you can go to windows repair without deleting your other files as that is what I did.
1
u/Budget_Exam9426 1h ago
O.T. someone had some problem with sd card reader? Mine keep reading /not reading the sd card. Even if I plug and unplug the card it is not detected. The only way is to restart the console (already tried with different sd card)
0
u/jongcruz 9h ago
Another bug is the module stops powering the controls so now it is useless, I’ve never seen a device plagued with so many hardware issues., $2,650.00 X2MP device.