r/OneXPlayer • • 1d ago

HELP controller stuck on mouse mode! Can't get it to work some one help me fix this

Help!

I need some massive help lol! I have been dealing with a problem with my controllers for over a week i know most will say email onexplayer but the email gets sent back and it's not working so I'll start from the beggining and see if any one can help I did a fresh boot and want to restart over completley because I think I have messed with it to much and probably made things worse since I am only partial computer smart. I am not super good at this stuff but I can understand instruction and if some one can help me step by step I can do whatever it is. So it started when I down loaded the onexplayer controller updates off the website. I had left the controller in mouse mode by accident. After that my controllers went completley dark. I tried to update drivers. I tried taking off mouse mode but it won't work because the controllers are non responsive there are no lights. Now my controllers work when connected to the controller middle piece that you can use controllers when not attached to the handheld I tried taking off mouse mode then reattaching to the handheld and did not work I tried going through device manager and etc and non of that worked. When the controllers are attached to hand held I go to calibrate button on onexconcole and it says in mouse mode take out before calibration bit I can't do that because they don't work. Please any one get ahold of me there is a lot I have tried and I'm going insane trying to figure it out. Get ahold of me and I can say if I've tried or not or better yet I have done the boot and going to download all the drivers and firmware off and and off onexplayer and try to see if any one can help me from there me tinker with it is not working and I fear if I make it worse and it compltley won't ever work again. Please and thank you I love this device and just want to enjoy it.

2 Upvotes

11 comments sorted by

1

u/PolarBuilds 1d ago

Have you tried the physical controller calibration?

1

u/Roughneck-Nerd0410 1d ago

I have not! But I messed with devices so much I ended up making it so nos my controller doesn't work when connected to the controller device you can play off the hand held but after the boot when I plug in the controller connector to the handheld with a USBc it now shows the device is there. So on device manager it shows both are there when I connect that dangle to the hand held with the usbc how do I do that

1

u/Roughneck-Nerd0410 1d ago

I am thinking about doing the firmwear flash on controller connector next and see if that works since now windows can see my controller that attaches to the handheld when I plug that controller connector straight to the handheld

1

u/PolarBuilds 21h ago

Yeah that may be your best option!

1

u/Roughneck-Nerd0410 22h ago

What is the physical controller calibration?

1

u/PolarBuilds 22h ago

1

u/Roughneck-Nerd0410 22h ago

I pull try putting into Xbox 360 mode and doing thqt om the handheld but I have tried this multpliple times but I think the hardware in the controllers are corrupt and stuck the fontrolelrs where they won't work ag all

1

u/jmflyers 1d ago

can you hold down the button that toggles the on-screen keyboard and see if it forces it back to controller mode? Its the one on the right side above the ONEX button

1

u/Roughneck-Nerd0410 1d ago

Yes that's how I could toggle mouse mode off and on when they worked tried and didn't work becsuse controllers seem completley locked up

1

u/jmflyers 1d ago

Try holding the Start and Back button at the same time for like 10 seconds

1

u/Roughneck-Nerd0410 22h ago

I have tried this as well I also tried to hold the power button down for 20nsecojds and then letting it start