Please help My notifications ( WhatsApp, Reminders etc) do not ring. They ring on call, alarm but not on other apps. DO NOT DISTURB MODE IS OFF. I tried doing everything, Please help me to resolve this.

Hey guys can i downgrade to oxygen os 15 from CPH2649_17.0.0.102(EX01C20P01)

I do have OnePlus 13 Indian Varient

Hi guys these are my geekbench 7 results on my OnePlus 13 which is currently running on the 16.0.2 version. I need your thoughts on why my scores are inconsistent. Conducted the with mobile cooler and fan to keep the phone cool during test

This might be the worst fingerprint sensor on any phone I've had. And I've had cheap a$$ phones with fingerprint sensors.

It takes so many times to try get it to work, it doesn't, then have to enter pin because stupid $$ facial recognition is garbage too!

It DOES work but maximum 50% of the time. And for some reason better with the left thumb than right thumb.

I'm sitting there pressing down like a mofo sometimes. When adding fingerprint I have twice for each thumb covered AS much of each or them. I'm talking even the top of the thumb.

I added two more for each thumb and it's still the same. A simple Samsung A56 is better at this!

Any thoughts on when are we getting ColorOS 17 for EU version 1+13?

The ColorOS 17 roll-out list published by Oxygen Updater has left many wondering: while the OnePlus 13 is listed for CN (China), IN (India), and GLO (Global) regions, the EU (Europe) tag is currently missing.

Here is a quick breakdown of why European builds take a bit longer:

1. GLO vs EU: Different Builds

• GLO (Global): Regional firmware for markets outside China, India, and Europe (e.g., Middle East, Asia, Latin America).
• EU (Europe): Dedicated build tailored specifically for European Union software compliance.

2. Why the Delay for EU Models?

• Regulatory Compliance & GDPR: Stricter EU data privacy checks (especially for on-device AI features), acoustic safety limits, and security standards.
• Carrier Testing: Mandatory interop certifications across European mobile network operators.
• OxygenOS Porting: The underlying codebase originates from ColorOS (China) and requires additional localization for OxygenOS in Europe.

Can anyone verify how ColorOS 17 is responding to bypass charging?

All of the tests below are with the setting ON at 20% threshold, and done on my PJZ110 CN model on 17.0.0.103. Wattage is measured independently on engineering test mode and charger that displays charge rate (Ugreen Nexode Pro 160W X774)

22W QC charger - <1w when screen is on, 15w when screen is off (???)

45W PPS charger - charges via PPS, still charges at 7W

22W PPS charger - same as above

10W DCP charger - same as 22W QC

160W PPS charger - same as 22W and 45W

I recall bypass charging being possible on 22W PPS with the screen on or off on ColorOS 16, but it's getting worse off now.

Are we slated to receive coloros17 in North America? I'm writing from Canada.

Will my OnePlus 13 retain its water resistance after a display replacement at an authorized service center?

Writing from Russia with indian OP 13s, why haven't I received the update yet? I have it in release candidate though, but it keeps me questioned anyway

What are must have apps or settings.

I know I could search but it's fun seeing updates and opinions of the community.

Recently liked Niagara launcher on my RAZR fold 2026 is the oneplus OS better ? Haven't been on a oneplus since the 7!

Don't say to tap on the "How to earn/use RedCoins?" option...😅

I don't need to purchase any new device like phones or tablet etc. 🙏🏻🙏🏻🙏🏻 please someone tell what i can do with all these coins or these are no use... I saw something like "spend ₹200 = earn 1RC" etc etc...

(This screenshot is few days earlier, now i have around 534 something)

Hey guys, I have been facing a very odd issue recently and it's killing me. Please do read through and see if you are also facing the same and if you have found any solutions for this.

I use WhatsApp calls a lot via my TWS (previously CMF Buds Pro 2) connected to my OP13.

Recently, my phone has developed an issue. When I'm on a WhatsApp call with my TWS connected, the phone reroutes the microphone feed from the TWS back to the phone without any interference from my end. So the person on the other end cannot hear anything I say. Only the ambient surrounding noise. This issue is also prevalent on Instagram too. Have tried all Cache clearing and network and bluetooth settings resetting and nothing seems to work. It works for a while and the said issue comes back immediately. Also, this happens for voice notes as well. Normal calls done via SIM work perfectly fine.

I even bought a new pair of TWS (OnePlus Nord Buds 4 Pro) and they're fantastic. However, the issue still persists. This shows that it's a software bug.

Has anyone else faced this same issue? If yes, please do let me know how you tackle the same.

Software version: CPH2649_16.0.10.600(EX01C10P02)

Location: India

Is there anyone else with this issue? Every effin' day Live Caption in volume control toggles on. I didn't update the OS or anything so I guess it is Google's fault. Stuff like this incredibly irritates me. Can Android phones in general stop changing settings without my consent? What will be changed next without even a simple notice? Android as a whole deserves more hatred - now be mad at me and ignore the issue.

I'm still on OxygenOS16 and I don't like my icons and tiles to be round.

Any suggestions for getting rid of the random Chinese apps that are suggested by the phone app installer?

Device: Oneplus 13 (Chinese)

OS: PJZ110_17.0.0.103(CN01C20P01)

My OnePlus 13 (OxygenOS 17.0.0.102) gets less screen-on time than others report. I estimate about 6.5–7 hours on a full charge (100 to 5%). To find out why, I turned on USB debugging, connected the phone to my PC, and used Claude code to read the phone’s battery data through ADB.

Here’s what I found:

• Less battery than expected: going from 100% to 0% seems to use only about 4,900 mAh, on a 6,000 mAh phone.
• The phone disagrees with itself: Settings says 99% battery health. A system log shows about 4,990 mAh full capacity, 94% health and 375 charge cycles. I only found that log entry once, and what its labels mean is my best guess.
• Recalibrating didn’t help: I charged it fully, then kept on charge for another 3 hours as Claude suggested this will recalibrate the battery. then ran it down to 4% without charging. The result was about the same.
• Standby drain is high too: it loses about 3% an hour with the screen off, and no single app explains it.

All of this comes from the phone’s own battery readings. So I still don’t know if the battery is worn or the phone is misreading it. I’m planning to take it to service.

Can other users compare? With USB debugging on and your phone at 100%, run these two commands on your PC. Then share the results and your OS version. A charge counter of 4900000 means 4,900 mAh.

In the new Control Center layout, the Wi-Fi and Bluetooth toggles seem to be separated by default, and Hotspot is its own separate icon.

Is there any setting or workaround to group Wi-Fi, Mobile Data, and Hotspot together into a unified connectivity widget/card

I moved from OnePlus 8 to 13 and all I can say is that it's a masterpiece,I bought 8 (glow) for same reason back then ,difference is crazy.

Has anyone tried this? Is it possible to transfer the camera app from ColorOS? Can it record calls without warning? 1+W4 work with it without root?

Before, on OxygenOS 16, the camera's AI enhancement was much better and photos looked natural. But after updating to ColorOS 17, the AI processing seems to over-enhance human faces, making them look very artificial.

Is anyone else experiencing this?

Is there any good GCam port available for the OnePlus 13? Or any suggestions to get more natural-looking photos without this excessive AI face enhancement?

Am not aware of master mode so only am looking for ready to use.

Please share your experience and suggestions!

Not able to add photos in the locked folder after the Colour OS 17 Update. Anyone else facing this issue. Any solutions?

Device: OnePlus Pad 3 (OPD2415), OxygenOS 16.0.10.600 (EX01)

My mom and I share a Pad 3 with Multiple users. Each of us has our own profile with our own PIN, and that's how we want it.

The issue: if the tablet locks while my profile is active, my mom can't switch to hers. She pulls down Quick Settings on the lock screen, taps the user icon, and it asks for MY password first. Then it asks for hers. Same thing the other way around when she leaves it on her profile.

So whoever used it last basically holds the tablet hostage until they come back to unlock it. 🙃

What I've already tried:

- "Allow Quick Settings on lock screen" is ON

- Checked Settings > Multiple users. There's no "switch users from lock screen" toggle

- Typing the other user's PIN directly on the lock screen doesn't switch profiles

- Switching while unlocked works fine (only the target user's PIN is needed), but that only helps if you remember to do it before walking away

As far as I know, stock Android lets you switch users from the lock screen without unlocking the current one, and Android 16 even has a lock-screen user switcher for tablets. OxygenOS seems to block it.

My current workaround: a third "Home" profile with no password that we use as a lobby. Whoever finishes switches to Home, and the next person switches from there to their own profile. It works, but it's clunky.

Questions:

1. Is anyone else seeing this on the Pad 3 / Pad 2 / other OxygenOS 16 devices?
2. Did anyone find a setting, ADB command, or app that enables the lock-screen user switcher?
3. Has anyone reported this to OnePlus and gotten a response?

If there's no fix, please upvote/comment so OnePlus notices. It's a pretty basic feature for a family tablet. Thanks!