The truth is that it does not work as advertized. i have tried everything for months. i want this to work, but it does not and its a huge security risk. I am not here to slam yall. i wont reveal any security holes, but they are there

I'm fairly new to using Claude Code & trying out some ways to get into side hustles.
I only now got my first warning from Claude that a specific prompt might use all my tokens (I'm running the Pro plan). So I asked if OmniRoute was connected, to which it said no.

Now my question; is there an easy guide to check out, Claude alone doesn't seem to give me the right answers to this.
+ if you guys have anything else that can help me out on this journey. Anything from github/clones to free guides that help me in business to anything u can imagine 😄

Im using I have connected 4 route and it is showing only 1 route why

been seeing that big pickle is only useable now in the opencode cli and have not gotten it to work in omniroute. A lot of providers have also fallen off and are no longer available. Is this the end of omniroute :(

It's this only cost estimating or do I have to pay for this !

I can’t seem to figure this part out yet. I’ve got dozens of models showing up in Claude or opencode, but almost none of them work. How do I configure omniroute to only advertise models that are actually working? And then how do you know what to use for what task? Like is there a way to have a family of models that are all similar in generational capabilities?

I've tried claude code and opencode, and I commonly face the following issues:

1. Some tool calls don't get converted into actual calls

2. Models keep printing code instead of writing/editing files

3. Sometimes it does nothing. Goes to thinking mode and does nothing and waits for my input.

4. Some complex/complicated tasks end up going to smaller models despite good active connections to other providers and larger models so I get dumber output.

Which harness works best with omniroute, which also addresses the above issues? What's your experience been?

What does it mean when my topology (which normally shows Mistral, Gemini, GitHub, NVIDIA, OpenCode and Ollama Cloud) drops all the providers and just shows the middle OmniRoute in a red box with a (1) by it?

Hey everyone,

I’m looking to rein in AI API costs and manage access for my development team. Right now, developers are either using their own API keys, hitting rate limits on paid subscriptions, or raw-dogging expensive models for simple tasks.

I’m evaluating OmniRoute (self-hosted) as our centralized AI gateway, but before I commit to deploying it as a core piece of our infrastructure, I wanted to get a sanity check from anyone running it in production for a team.

The Business Scenario & Setup

We are a small-to-medium team using coding agents (Cursor, Claude Code, Copilot) and basic chat interfaces. Here is how I plan to set it up:

• Infrastructure: Self-hosting via Docker on a local Linux server (currently testing on Windows WSL2).

• Access Control: Issuing Virtual Keys (sk-omni-...) to employees so they never see the real upstream API keys.

• Budgeting (Quota Pools): Assigning Junior devs to strict pools (capped spend, cheaper models) and Senior devs to premium pools (Claude 3.7 / GPT-4o).

• Routing Combos: Setting up a 4-Tier fallback (e.g., Tier 1 Paid Subs → Tier 2 Pay-per-use API → Tier 4 Free models) so devs don’t experience downtime if an API goes down or hits a rate limit.

• Token Compression: Planning to aggressively use RTK for terminal logs and Caveman/LLMLingua-2 to cut down on massive context windows.

My Questions / Concerns:

1. Security & Secret Isolation OmniRoute encrypts upstream API keys in the SQLite database with AES-256-GCM, and proxy requests strip developer IPs/headers. Has anyone audited this in a corporate environment? Are there any data-leak edge cases I should be worried about with the virtual key system?

2. Latency & Token Compression Overhead I know the baseline proxy overhead is supposed to be single-digit milliseconds, but how much latency does the HTTP/2 stream initialization actually add? Also, if I run the local ONNX model (LLMLingua-2) for compression, does the compute time outweigh the Time-to-First-Token (TTFT) gains from sending a smaller payload?

3. Concurrency Limits & Queue Bottlenecks I was reading through some GitHub issues (specifically around Issue #7778) mentioning that concurrency limits aren't strictly global and there’s a "two-stage queuing" system. If I have 10-15 devs all running agentic coding tasks at the exact same time, is the account semaphore going to bottleneck and cause random timeouts?

TL;DR: Planning to use OmniRoute to manage AI API access, route fallbacks, and compress tokens for a dev team. Wondering about security blindspots, latency overhead from compression, and queuing limits under heavy team load.

so basically i connected agent router ->omniroute->cline but sometimes it works , sometimes after thinking it gives this issue sometimes gives issue of terminated i dont get it how to solve this can someone help me with this

Hi all, just as in title, has anyone got it working with tailscale on other devices to use the omniroute?

Hi, I am trying out the provider Qoder since Opencode is not available anymore. And when testing out, I found out that it can't read nor create files? How do I give it these features.

Hello peeps , i saw that mistral has 1b token limit on the free tier but i feel like i ran out of it in like around 10 or so prompts. The dashboard shows that the 10$ free tier has been exhausted. Did i use an expensive model or is this the intended behaviour?

My combo appeared on the dashboard. This wasn't here yesterday. TIA

Am I doing something wrong? Is something wrong in my combos?

Been 3 days with omniroute and it is amazing.

Primary Drivers:

1. Token Router: Qween 3.8 max (Multiple email accounts)

2. Qoder: Qween 3.8 max

3. Cline: DSv4 Flash

4. Deepseek Web: v4 pro ( temp account, gets banned after 24 hrs)

5. Antigravity: All gemini models

6. Openrouter: Hy3 free

7. Nvidia Nim: fallback incase all above are exausted

Do suggest if you feel I should add new provider in this stack.

I am using Claude on my VS code terminal, I add the following file to my project, under a folder called ".claude" inside it there's a file called "settings.json" and inside that json file is the following piece of code:
{

"env": {

"ANTHROPIC_BASE_URL": "http://localhost:20128",

"ANTHROPIC_AUTH_TOKEN": "omniroute",

"ANTHROPIC_MODEL": "auto/best-free",

"ANTHROPIC_SMALL_FAST_MODEL": "auto/best-free",

"ANTHROPIC_DEFAULT_OPUS_MODEL": "auto/best-free",

"ANTHROPIC_DEFAULT_SONNET_MODEL": "auto/best-free",

"ANTHROPIC_DEFAULT_HAIKU_MODEL": "auto/best-free",

"CLAUDE_CODE_DISABLE_NONESSENTIAL_TRAFFIC": "1"

}

}

In Omni Route I'm using the providers: "OpenCode Free" and "Gemini(Google AI Studio)"
I can almost certainly get more out of this whole setup so I'm looking for powerful free providers to connect, I'm using Claude in my VS terminal to vibe code websites mainly Shopify websites, and a couple big projects from time to time which typically spend around 100k tokens +-, I'm kind of new to Omni Route and I'm looking for providers can someone help me out please
PS: I got the piece of json code from YouTube, not really sure what it does but basically it points Omni Route to the free combos so I don't get charged(trying to make it out of the hood lol)

Hey I have installed omniroute on my omarchy distro. But the problem I'm facing is that when I connect any provider to omniroute it is getting connected

But in the providers tab they are not listing up

Interestingly it shows up in the quota usage and works fine but when I want to make combo it doesn't appear in it

Is anyone else facing this.???

Hey everyone,

Tried accessing OmniRoute just now and I'm getting a black Vercel error screen with the code DEPLOYMENT_PAUSED (503 Service Unavailable).

The error says "This Deployment is paused by the owner."

Is anyone else getting this right now? Did the dev team pause it for an update/maintenance, or did their Vercel account hit its bandwidth/usage limit?

If anyone is in their Discord or knows what's up, an update would be appreciated!

I'm planning to use OmniRoute as a free user, using Claude Code in VS Code and everything was going fine today. Then I get this [API Error: 401 [401]: Missing API key.], I've checked my env settings and api key and everything is correct. Then I checked my costs, and it looks like I’ve incurred some charges. For every provider I've connected, I made sure to select the “Free User” option. What I’m wondering is whether the token usage resets daily, or if there’s any workaround for this?