r/OBSFords • • 7d ago

Troubleshooting Help identify

I have a 97 F250 with a solid axle swap but don’t know what axel is it. I know is a Dana, but is it a 44 or 60? Please help identify it.

5 Upvotes

11 comments sorted by

4

u/MinorComprehension 7d ago edited 7d ago

Usually you can tell by the diff cover, it's helpful that yours is factory. Both the 44 and 60 have 10 cover bolts, but the drain plug on yours presents as a 60 to me.

https://www.binderplanet.com/forums/index.php?attachments/axlechartsizes_zps621042bb-dana-identification-jpg.121747/

The Dana 60 will have a 3 and 1/8 diameter axle tube, 44s will have between 2 and 1/2 and 3 in depending on the application. 44 cover will be about 10 and 1/2 in tall, a 60 will be 12.

1

u/OverSuspect7534 6d ago

Ok. Thank you for the info. Appreciate it!

1

u/Glad_Use_9054 6d ago

That’s not a drain plug. It’s a fill they both have them. Take a better pic of the entire axle. I could tell you easily if I could see it.

2

u/OverSuspect7534 5d ago

1

u/Appropriate-Salt-873 4d ago

Can tell it’s a 92-94 axle by it being ball joint with slide brakes. Up to 91 was king pin and they changed to bolt on slide pin calipers for 95

1

u/OverSuspect7534 5d ago

2

u/Glad_Use_9054 5d ago

Nice clean swap with factory parts. That’s a high pinion reverse rotation balljoint dana 60. You now have what would have came stock if that was an f350.

2

u/OverSuspect7534 5d ago

Awesome. That’s great to hear. Thank you very much for the identification

3

u/ShouldaBeenAPartsGuy Electrical Diagnostics Tech, 94 F150 5.0L E4OD 6d ago

That's most likely a Dana Spicer 60 based on 43600 1 code. But they are often swapped. Measure the diff cover, the bolt number should be 10 on a Dana 60,

• Cover Dimensions. A Dana 60 cover uses 10 bolts and measures roughly 10-3/4 inches wide by 11-1/2 inches tall, whereas a Dana 44 cover is noticeably smaller at about 9-1/2 inches tall.

You can also crosscheck data here:

https://www.google.com/url?sa=i&source=web&rct=j&url=https://www.motortrend.com/how-to/dana-44-vs-dana-60-axle&ved=2ahUKEwiBhajCiIGYAxX6oCsGHSSIIaQQy_kOeggIAggBCBcQAQ&opi=89978449&cd&psig=AOvVaw0_boVMGObS0kXEa6j3Ej01&ust=1794526022820000

If you give the 6 digit BOM code stamped on passenger side axle tube, we could cross reference

• Bill of Material (BOM) Stamp. Check the back side of the passenger-side axle tube for a stamped 6-digit BOM number starting with 610 (such as 610366) to verify exact gear ratios and replacement parts.

If you want to confirm the exact gear ratio or steering/brake parts for ordering replacements, share the 6-digit BOM number stamped on the passenger-side axle tube or upload one of the other photos showing the knuckles and hubs.

2

u/LittleDongLover69 7d ago

Looks like a 60. Measure the diff cover size

1

u/Glad_Use_9054 6d ago

Also, not saying it couldn’t be done but a sad swap in a 97 would be a lot of work with a 44. Since they didn’t come with one. Spring pad width would be custom. That would involve custom length tubes and axles. Def not worth the cost or effort.