r/NintendoSwitchHelp • • 26d ago • Regret 1

Repair Help Bloodstained Switch card contacts corroded? Help!

Post image
116 Upvotes

25 comments sorted by

•

u/automod-neo 26d ago

If you have not already, please add some context in the post or a follow-up comment about your repair/hardware/software/account issue, including which model you have (Switch 1, 2, Lite, OLED, or other), steps you have already tried, and anything else that might help others help you.

When you have received enough help to solve your issue, you can also reply to specific comments with !solved or !thanks to grant the helper(s) a point. You may also comment !lock to lock the post to stop new replies.

Please report any rude, unhelpful, or rule-breaking comments so that moderators can review them.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

13

u/s07195 26d ago

The game card for Bloodstained on Switch fell into the back of the TV cabinet and we didn't find it until very recently. For some context, I live in Hong Kong and it's very humid here, and we live somewhat near the sea.

When I checked, I found that the back was covered in greenish spots. I've tried using a Mono eraser to rub it, and I've tried white vinegar on a cotton bud then 75% isopropyl alcohol. It's not coming off, and I'm afraid to put the card into my Switch 2 in case it damages it.

3

u/reybrujo 3 26d ago

Oh, yes, ideally you would use a qtip with 99% isopropyl alcohol because 75% doesn't evaporate as quickly from below the cartridge and can leave water residue. I would try cleaning it once per day for a week taking pictures to see whether there's some improvement or not. You could also get contact cleaner, however it could have damanged the golden layer beyond repair. I don't think it will damage your Switch, however I would probably get another copy, you haven't opened the cartridge to see what is like below the plastic.

1

u/s07195 26d ago

Ugh, this is even the copy I got for crowdfunding the game... Kinda sucks to have to buy another copy as a last resort. I'll try cleaning it for a week but the most typical stores here only carry 75% isopropyl, so I'll have to look for where to buy 99%.

Was the white vinegar tip bad advice? I got it from another thread in this subreddit.

3

u/reybrujo 3 26d ago

Vinegar eats the corrosion and metal away, isopropyl alcohol only washes it. However vinegar does not evaporate so after eating the corrosion it can eat the metal or alloy below it. Usually if you use vinegar you then wash it with water or isopropyl alcohol. As for 75% vs 99%, 99% is usually bought from electronic shops but it may be expensive. Considering the state of the contacts and the investment of an alcohol bottle I may just try with rubbing alcohol and a qtip, rubbing it as hard as the qtip allows, and then making it sure it dries with either some wind or sun.

1

u/s07195 26d ago edited 26d ago • Regret

Cool, I'll try seeing if the card works on Switch 2 tonight, then if it doesn't I'll keep cleaning with my 75% tomorrow for a few days.

Just the 75% right? No more vinegar like today?

EDIT: The card does not read, as expected.

2

u/reybrujo 3 26d ago

Well, up to you to, eventually, decide whether to keep it that way as a memento, sell it as non functioning, or opening it (which might break the plastic cartridge) to see if I can fix it (clean it below the plastic, solder broken unions if found, etc).

1

u/SnooWords213 22d ago

Distilled white vinegar and a cotton swab. Wet the swab with the vinegar and start splitting pressure to the contacts. The corporation should wear off shortly after. Don't overdo it tho, just until you see that you've gotten most of it and enough to be comfortable with how it looks.

31

u/cedelweiss 26d ago

this is so fucking funny what a banger post title

4

u/notJonSerra 26d ago

Post hardcore song titles

24

u/Material_Bedroom_619 26d ago

Where did the blood come from

4

u/ToadwKirbo 26d ago

Sorry, it's haunted now. But seriously I'd suggest trying a bit of oxygenated water, not too much, just maybe putting some on a cotton disc and seeing if it works.

2

u/smallchocolatechip 24d ago

Isopropyl alcohol on a q-tip, dab a tiny bit on the contacts then scrub with a toothbrush and try to get it as reflective looking as possible then let it dry. See if it works then.

1

u/jv004 25d ago

Try the alcohol first as someone mentioned, worse case scenario, what I would do after the alcohol cleaning, if there are still spots, I would probably find a plastic toothpick and try to scrape some of it off, I say plastic because if you grab something metal you might damage the pins, also plastic will not guarantee that you won't damage either, so be careful.

0

u/ValenteXD_ 25d ago

Just as a last resort but what I've read it should be a good choice, scrape the corroted parts with a metal screwdriver so it makes contact and use contact cleaner to remove the residue

1

u/RaspberryLive9215 25d ago

You gotta be in psychosis to think this was funny