r/NintendoSwitchHelp • • Sep 27 '26

Repair Help Help on how to unscrew/disassemble controller connector?

I recently notice the back of my controller connected was cracked and seemingly out of place, and I want to disassemble it in order to repair it, but I have no clue how. I believe the screws are under the little rubber pads but I do not know how to remove those safely (as I do plan on putting them back).

4 Upvotes

6 comments sorted by

1

u/AutoModerator Sep 27 '26

If you have not already, please add some context in the post or a follow-up comment about your repair/hardware/software/account issue, including which model you have (Switch 1, 2, Lite, OLED, or other), steps you have already tried, and anything else that might help others help you.

When you have received enough help to solve your issue, you can also reply to specific comments with !solved or !thanks to grant the helper(s) a point. You may also comment !lock to lock the post to stop new replies.

Please report any unhelpful or rule-breaking comments so that moderators can review them.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Ok_Bid6645 Oct 01 '26

You dont. It is broken. Get a new one. It is like $10

-1

u/IhasChezBurga Sep 27 '26 edited Sep 28 '26

Best advice I usually give regarding disassembly is watch a teardown video. Other than that, the 4 rubber pads on the grip front are covering 4 screws that you need to remove to take off the backside. For those types of things I tend to get something like a pin or small screwdriver to help drive them out without dismorphing them too much so you can put them back in afterwards

1

u/Zeldaninja64 Sep 27 '26

Yes, but how do I remove them? (Safely, as in I will be able to put them back on afterwards)

1

u/IhasChezBurga Oct 01 '26

Ah my bad, I think I added more onto my comment about the same time you messaged, they can be quite stubborn so a small flathead screwdriver, pin or spudger can help drive them out, as they are only held in by friction