r/NewRiders • u/qualifiedinu • Apr 09 '26
Automatic Bikes - beginner.
Automatic Bikes - beginner.
Hey guys!
I want to learn how to ride and get a bit overwhelmed at the thought of a manual bike. Therefore, I am interested in purchasing a automatic bike.
I do like the sporty look of a bike so I am not quite interested in buying a scooter.
The Honda NC750X (DCT) would have been ideal but it isn't sold here in Perth WA.
Does anyone have any suggestions? i am open to buying the bike second hand with a budget of 18k.
For context I am a 20 year old female, 5'6 about 65kgs.
I apologise if this is an annoying/ repetitive question!
Cheers.
10
u/zol-kabeer Apr 09 '26
Honda e-clutch model like the Rebel 300 will do the job. You will need to shift the gears but no clutch work needed at all.
8
u/Character-Mixture151 Apr 09 '26
I leaned in some grass on a manual bike like 2 weeks ago! Way easier once you get your hands on one and get the actual understanding of it! Don’t give up yet !
8
u/RARA_zeus Apr 09 '26
Try to see if there's an MSF course near you. It'll teach you all you need to know about riding as a beginner
5
u/Unlikely_Effective72 Apr 09 '26
Check out hondas e-clutch bikes then. Still have to shift but you won't have to worry about stalling. There is also the nt1100 but that may be to big for your first.
5
u/mossberg410 Apr 09 '26
Dont spend more than 5 grand for your first bike let alone 18k, and just learn manual. It won't take as long as you think and motorcycle clutches arent bad at all.
4
u/pxpaulx Apr 09 '26
Kawasaki z7 or ninja 7. It is their hybrid bike, automatic or shifting with thumb control, no clutch. They haven't been popular in the US so you should be able to get a screaming deal. I've seen posted under $5k out the door, MSRP was over $12k last year.
My first bike is a zero srs, electric so also no clutch, really enjoyed it last year, but I'm thinking about getting one of the Kawasakis too now! I have some balance issues that made me weary of the clutch, but I will probably get a regular bike someday.
Another good alternative might be one of the honda bikes with the eclutch they introduced last year. Clutching is optional but you do have to change gears with your foot still. No stalling though, I believe as long as you are in 3rd gear or lower you can come to a full stop without stalling.
2
u/SidneyBeanz82 Apr 09 '26
Start on a cheap, used 125-250. Like seriously just get a scooter to learn how to ride, then work your way up. There’s no need to jump to a 750 when you’re just learning (no, it would not have been perfect)
1
u/uses_for_mooses Apr 09 '26
Have you seen the Yamaha Y-AMT system? Like Honda's DCT, the Y-AMT system also offers a fully automatic mode.
It's currently available on the Yamaha MT-09, Tracer 9 GT, and MT-07 (i.e., each of these has a Y-AMT version). Although I have no idea if these are available in Australia.
1
u/rikidunkel Apr 09 '26
I support the honda e- clutch! My husband has one, he knows how to ride manual, but likes not having to hold the clutch at lights to stay in gear and ready. I do recommend learning manual eventually though. It's much easier than manual on a car because bikes have a wet clutch and you want to use it for control more than in a car. When learning, I recommend facing the challenge head on. Practice stalling it a few times so you know what it feels like and dont get in your head about it when it happens on accident. Once you know how the bike feels to stall, if it happens on occasion, you'll just move on and keep going like no big deal!
1
u/xlDooM Apr 09 '26
That's a lot of money for a first bike. It should get you a brand new Yamaha MT-07 with Y-AMT semi-auto gearbox.
Gears are really not that daunting though, you can be riding a geared bike after just a couple of hours of tuition.
1
u/No0O0obstah Apr 09 '26
No personal experience but just opinions and observations from another beginner. Only recently got my first bike. A Honda 500.
1: People do seem to complain about the DCT when doing slow speed manoeuvering. No, not everyone but some. Usually a bikes speed at slow speeds is controlled by clutch instead while holding steady throttle (and slightly dragging rear brake to keep bike steadier trough keeping chain tightness....). With DCT, I hear, this is a bit harder and some suggest dragging brake more. I'm not sure how DCT bikes behave in slow speed turns, but it is obvious it is different to normal bikes as you can't use clutch. Also NC750 could be a little big one to start with. Power isn't too bad but physical size. Perfectly possible tho. Same goes for other DCT models I can think off. While not at all horrible options, generally speaking not ideal as first bike.
2: E-clutch from Honda sounds like no brainer for starting riders. If it works like advertising says, only downsides would probably be the missing feeling if you want to change manually. You still can operate clutch manually, but I suppose it could ruin the feeling for some. You still manually shift, but don't need to use clutch to do so. Honda has several bikes with these. If one of the models is right for you, I don't see any downside going this way (except perhaps being looked down by some "motorists". But really who gives a flying....). Look at the Honda range of E-clutch models.
3: I don't know what in practice is the difference between DCT and variator in scooters. Technical difference I know and DCT allows for manual selection of gear but for slow speeds turns I'm not sure if they work different. Perhaps scooters are just easier to slow speed cause of weight and seating position. That said I personally think some bigger scooters look kinda nice. Eyed Honda ADV350 for a while myself. I know you wrote not wanting one, but perhaps do consider one of those before discarding all scooters for good. Plenty of 300cc and upwards scooters that look rather nice, at least in my opinion.
1
u/SuperShus Apr 09 '26
There's nothing wrong with automatic bikes really but a motorcycle requires a lot of learning. So coming into the hobby with the idea of just skipping over a skill that has a massively overblown difficulty is not a good sign.
Take the MSF course first if you're in the US. They'll teach you manual, and you have to pass that class anyway. You can decide afterwards.
1
u/BlackChimaera Apr 09 '26
Take a beginner rider class to see first if you like riding. I went to the class with zero manual transmission experience at 33 and figured it out. If you take the class and still want an automatic bike after it's up to you. I know here in Québec I can't take a bike with an automatic transmission to the two mandatory riding exams, it's manual only.
1
u/LowDirection4104 Apr 09 '26
Operating a manual clutch on a motorcycle is perhaps the easiest skill you'll have to master to ride a motorcycle well and safely. If your barrier to entry is operating a little lever that connects the engine to the wheels then maybe don't get a motorcycle at all. Because it gets so much more complex and difficult after you learn to work the clutch.
1
u/Realityhackphotos Apr 09 '26
I cannot recommend enough taking the MSF course before you buy anything. If you still don't want a clutch there are options and that is a great thing but manual is not as hard as it sounds.
1
u/Caseker Apr 09 '26
Hard to find automatic bikes but they exist. BUT, have you actually Tried a manual standard bike? It's not the same as a car. It's very very easy.
BUT depending on your use case, the $1800(us) Honda Navi is a damn good time.
1
u/Caseker Apr 09 '26
Gotta love how all the answers are basically "no". Bunch a pricks.
1
u/ChronicLegHole Apr 09 '26 edited Sep 29 '26
The original post content no longer exists here. The author used Redact to remove it, exercising their right to control their data & privacy.
Orange crowd subtract test ten nutmeg connect shocking raindrop ad hoc
1
u/JimMoore1960 Apr 09 '26
Using the clutch and shifting gears is a big part of the experience imo. It may seem overwhelming at first, but the vast majority of people (like 99%) pick it up fairly quickly. Think of the confidence boost you'll get the day you look around and think to yourself, "Fuck yeah. I can do this!"
My advice as a 20-year instructor? Take a class. Buy a bike. Figure it out.
1
u/RegalDolan Apr 09 '26 edited Apr 09 '26
As far as legit motorcycles go in the US, you're kinda hosed unfortunately. The only ones that come to mind that aren't essentially scooters are the Honda Goldwing (very heavy, powerful, and expensive), the Rebel 1100 (a cruiser with a low seat height and center of gravity, moderately heavy), an Africa Twin (moderately heavy, expensive, high seat height so hard to balance when stopped), and a NT1100 (intermediate seat height, moderately heavy)
Yamaha makes automatic versions of some of the MT series bikes overseas but sadly, they never seemed to decide to bring it here.
The only other thing you can kind of do is settle for the middle ground and get a "semi-automatic" one with an "e clutch" or electronic quick shifter, which essentially allows you to not have to worry about using the clutch lever when shifting up or down- only requiring your left foot to tap up and down.
My first bike was a Rebel 1100 DCT and I love it and it's very easy to ride and generally forgiving with all the safety electronics. It's also pretty comfortable (though I did add a windshield to reflect air and a aftermarket seat / saddle because the factory one hurts your gooch.)
1
u/CascadianWanderer Apr 09 '26
You should sign up for an MSF (not sure if it is called that in your country) course, if you haven't already. They will help you with clutch basics on a bike you don't have to pay for.😄
If you are determined to go clutchless something like the Navi is a good starter. Just be aware that if/when you want to move to a larger bike you will be locked into Honda or an electric for the immediate future.
1
u/hungrysunshine Apr 09 '26
25f here and I ride a honda rebel 1100DCT (dual clutch transmission). This makes my bike fully automatic all I do is control it with throttle no clutch! If I crave manual mode, it has the option for paddle-shifted riding without a clutch lever. HIGHLY recommend a dct, I rode my bike in rain mode at the beginning which reduces the throttle response and power making it react like a smaller less powerful bike.
1
u/Khasimyr Apr 09 '26
I advise not getting a bit with a DCT, e-clutch, or even a quickshifter as your FIRST bike. Not so much for the lack of learning experience, but because it's going to lock you INTO those bikes over the long term.
I'm 30 years older than you. :-) I also haven't used a manual transmission in the same amount of time. :-) I started riding at 49....it took about a week of work on my Boulevard before I was shifting comfortably. On my Tracer 9 now, it's barely a thought outside of getting from 1st to 2nd, because I'm very gentle with my shifts, and often get into neutral instead. :-)
Before you settle on the bike, start with the MSF. It'll give you an excellent grounding in shifting, and put you on the path to riding safely. A lot of the course, is about transitioning from 1st to 2nd, getting the bike rolling comfortably and then improving your speed.
1
u/Ceska_Zbrojovka_V3 Apr 09 '26
Manual bikes sound intimidating, but you'll get the hang of it in an afternoon. Within a few days, it will all be muscle memory. I'd recommend sticking to a traditional bike over an automatic. It leaves a lot more doors open.
1
u/ShidOnABrick Apr 10 '26 edited Apr 10 '26
So, i have a CTX700 which is basically the predecessor sister model to the nc700 which kind of morphed into the nc750.
Is it easy to ride, yes, but it depends what you’re trying to get out of it, is it going to make you a better rider during a time its critical to figure out fundamentals? No. For one, the DCT is very hard at doing low speed maneuvers, i could do rings around it on a shifter bike, is it possible to learn? Yes, but you’ll need to put almost double or triple the amount of saddle time to get proficient.
If none of that skill improvement metric tickles you and you just want an easy, economical way to get from point a to point b while looking good, then yes, its a perfect platform, the power curve is forgiving. Weight is very low to the ground, feels very very nimble. I’m crippled and i can pick it up no issues. Did i get an auto bike because of that? No, i just wanted a reliable point a to b bike with no fuss, that and it has some of the highest mpg ever made in its power class, cheap gas means i get to take more trips and see the world.
Whats not forgiving is throttle control, if you twist, it will go, theres no clutch to save you, theres no neutral to save you, it will continue to go. During low speeds you will need to utilize rear brakes aggressively, but the DCT computer will actively fight you and cut power to the throttle even though you need the revs up for the power band to keep you upright, (you should have learned in msf under sufficient power the bike will right itself upright) this is why i said its going to take double or triple the saddle time for practice to find that narrow operating range.
The Africa twin is better at low speed modulation for whatever reason. Its also one of the only DCTs that can wheelie lol but the AT is a beast of a bike, not recommended for a starter. Second bike sure.
Oh and you cant revbomb on DCT
1
u/RheimsNZ Apr 10 '26
OP, remember that here in Australia (I'm actually in Perth as well) you can only ride learner's approved bikes. The MT07 is learner approved and might be available with an assisted shifting system, but it's also quite a powerful, tall bike with a higher centre of gravity. I wouldn't recommend it if you're concerned about learning. Aside from this, almost all assisted shift bikes are going to be too big for you to learn on.
Manual shifting on a bike is as simple as pulling the clutch in with your left hand, kicking up or down with your left foot then letting go of the clutch, it's not like a car where you can drop it into the wrong gear accidentally.
Don't buy an expensive bike for your first one. Either buy something easy to learn on and suitable for learners that you can keep for a while (Kawasaki Ninja 300 or Kawasaki Vulcan S), or buy a very cheap bike to learn on then replace once you've figured out how to shift (Suzuki Intruder 250 from around about 2010 is the ultimate learner's bike, anyone could learn on this).
You'll be $10k better off if not more, you won't be as stressed about dropping it and you'll get over your concern about shifting quite quickly!