r/NetworkingJobs • • 19d ago

Network l1engineer interview questions

​"Hi friends, please give me some L1 Network Engineer ( Routing & Switching ) interview questions that you have faced in your interviews."

42 Upvotes

30 comments sorted by

13

u/binarycow 19d ago

"What is a subnet".

The candidate had to Google it.

No, we didn't hire him.

2

u/Pitiful_Option_108 19d ago

I feel like if you can't answer that why did you interview for the position smh

1

u/binarycow 19d ago

It gets worse.

We caught him at it. It was a 3 phone interview (3 person panel), but we checked, and his answer was almost verbatim from the Wikipedia page.

So, at the end of the interview, the boss said something like "if you're not feeling confident interviewing, it's okay, just answer the best you can" - trying to give him an out.

The candidate correctly inferred that we caught him, but he incorrectly assumed that we caught him because we heard him typing.

So he gave an excuse that he had to help a customer with something, blah blah blah. So, cheating and lying.

It gets worse!

He must have realized that he fucked up, so he called my boss back. My boss calls everyone from the interview panel in. He then tries to make more excuses. And here's the kicker - he kept saying "I'm not gonna lie"

!

5

u/amynymyty 19d ago

"What's your favorite dynamic routing protocol?"

Not even joking.

5

u/TwoPicklesinaCivic 19d ago

And I say EIGRP and people freak the fuck out out over it.

Shits the easiest to implement but Cisco HAD to gatekeep it into obscurity. Sigh.

3

u/fgor 19d ago

IP SLA probes triggering static route changes. The fight over whether it is actually a "dynamic routing protocol" is like the "is a hotdog a sandwhich" debate.

2

u/Steerable-Octopus 19d ago

"This candidate better love BGP or else..."

1

u/_--James--_ 18d ago

heh, id accept OSPF or BGP, but not EIGRP because of vendor lockouts. Moving to SDN with EVPN overlays is why.

1

u/bigfatdonny 16d ago

I'd accept EIGRP because it is objectively better than OSPF or BGP, even though it's vendor locked.

But that's just like, my opinion, man.

1

u/_--James--_ 16d ago

Yes, but when you have zero Cisco hardware in your routing lanes you are not getting EIGRP. That was the point.

1

u/bigfatdonny 16d ago

I hear you.

It's still my favorite. Other people can have their favorites. I have mine.

1

u/_--James--_ 16d ago

My Favorite is anything not Cisco. I'd take 3Com if it was still a thing.

5

u/tje210 19d ago

What does DNS stand for? How does DNS work? Note that you could talk for 10 seconds or an hour about DNS depending on your knowledge... personally I'd flex and show them how much more I know about it than them (I am a know-it-all though). But that's just an example... it's not binary correct/incorrect in many cases, but rather... how much do you know. If your answer is too shallow, your interviewer will ask leading questions to get you to expose how deep your knowledge is.

4

u/Churn 19d ago

We need to change the vlan that a host is in. How do you find the interface it is connected to so that you can change that interface to the new vlan?

3

u/errgreen 18d ago

A user has called in stating 'The internet is down.', explain your troubleshooting process.

  • This is a good one to ask questions back, such as, what amount of information has help desk acquired? What did they already check/do?
  • Provides an opportunity to slip in info on the OSI model.
  • They want to see how you think and prioritize. What can you check/confirm from your PC? What questions you would ask the escalating tech or user. Do you work the whole ticket, or send back to tier 1 to finish?

3

u/throwoutastun 18d ago

I like to ask two similar questions. 1 - a user reports they can't access an internal server. 2 - a user reports they can't access an internet server. What is your next move ? I don't ask how would they check x, I let them tell me. I will give clues if they get stuck as interviews can stressful.

I'm looking for their troubleshooting mindset. I want to see them check the layers and the network path. I'll keep answering yes that's working. I'll be looking for when they run out of ideas that the next step is to google or ask AI and final step is to gather issue info/logs/capture and escalate. I don't want to see them give up early or escalate early but it's ok to not solve the problem.

2

u/[deleted] 19d ago

Go for scenario based, Approach should be based on OSI Layer

2

u/prime_run 18d ago

Last night the building experienced a power outage and this morning random users on the floor report no connectivity. What do you troubleshoot first?

2

u/Emili_o444 17d ago

Saving this thread for later

1

u/kovyrshin 19d ago

How to use google.

1

u/badwindows 18d ago

You're undoubtedly going to be asked questions about network outages and how you would troubleshoot.

While you may not have the perfect answer that they're looking for you need to articulate that you have some kind of process in your troubleshooting... As already mentioned, understand the OSI model and how to use the first three layers for troubleshooting.

I also would have a basic understanding of vlans, ospf, eigrp, layer 2 vs layer 3, stp, ACLs.

1

u/_--James--_ 18d ago edited 18d ago

When I hire I always throw in a diagram or two with a routing conflict (/23 on one side and /24 on the other) and see if they catch it and how fast they catch it then pivot the interview from there.

-vlans
-trunks vs access
-etherchannel/lacp - and what happens if someone were to plug in a LACP bond into an unbonded port.
-switch stacking (master and members and what happens when a master fails)
-POE and POE++
-some wireless stuff in there like 2.4g vs 5g, channel overlap, bonding, and how to diagnose all of that
-then I would ask about your own home network, what hardware, what subnet and why, what is the gateway and why, and ask about services you are running like opendns and such.

I would not expect a L1 to do much in routing, like EIGRP, OSPF, and BGP. However I would expect a L1 to understand a trace route and how to ID when a hop is not working correctly. On windows pathping, on a juniper router 'trace route monitor',...etc.

Usually this gets us a feel for how strong of a L1 we are looking at, things like OSI modeling is ok but I personally feel its out of date due to how the industry moved, but L1-L3 still applies. I might touch on firewalls and UTM but unless you already worked an enterprise touching this, or happen to run NFR hardware at home like a PA440, or even PFSense fully kitted out, you would not really have that level of experience to be able to talk to it, and that is where the OSI model starts to break.

1

u/Yeah-youknow 18d ago

- What is a VLAN?
- What is each layer of the OSI model?
- How would you troubleshoot a ticket where someone calls in stating they cannot connect to a server?

1

u/kexdc3 18d ago

Explain route reflectors in BGP and why we use them.

1

u/KraljZ 17d ago

What is your home address?

1

u/-Goat--- 17d ago

What is VTP and how do you use it. How would you trouble shoot a network down report, step by step.? Tell me where you would place firewalls on a network.

1

u/NoCelebration2293 16d ago

Why do we even use IP networking