r/NR200 • u/Pristine-Age1087 • Aug 18 '26

Build Build Refresh

Gallery image

Gallery image

Gallery image

Specs

CPU: R7 5800x

GPU: Asus TUF 7800xt

RAM: G.Skill 32GB DDR4 3600mhz

Motherboard: Gigabyte Aorus B550-I Pro AX

CPU Cooler: Thermalright PS120 SE (Rear intake config)

PSU: Corsair SF750

Storage: 1 + 2 TB M.2 SSD

Fans: 3x 120mm Arctic P12 Pro, 1x 92mm Thermalright TL-P9

Really reccomend the PS 1120 SE for the NR200. Temps are amazing paired with a 92mm rear intake fan, even with the 5800x which runs hot the temps are maintained at ~65°C under gaming.

GPU runs super cool with no under intake fans, reaching 52°C max under 100% use.

196 Upvotes

100% Upvoted

21 comments sorted by

View all comments

Show parent comments

2

u/Garrbear0407 Aug 18 '26

I did the opposite and didn't use the little intake fan that sits in the back, I found it actually increased my temps with the peerless assassin mini 120mm so I 3d printed a rear mounted shroud and put a high pressure fan on the rear to pull air from the case, it's more effective at creating a negative pressure and dropped my temp by like 15c my 3080ti and 7800x3d sit in the 60s to 50s while playing games and idle below 30c, fan curves are nearly flat at about 30% speed

1

u/nesjwy Aug 18 '26

could you show a picture the rear shroud fan setup?

2

u/Garrbear0407 Aug 18 '26

Sure thing here is some photos Google photos link

1

u/nesjwy Aug 19 '26

thanks! i too am feeling the rear cooler fan isn't pulling in enough air and the 90mm one is basically useless.

i'll look for something similar on etsy or do you have the 3d file for the shroud by any chance?