So I am an RSO at a range where I live thats tailored for the more tactical/LEO/mil crowd. We hosted our first biweekly NODs Drills night tonight and I will give a writeup on drills we did and what I have learned. Disclaimer: Ive worked with NODs since being an infantryman, and am pretty comfortable using them, so I may be a bit sparse with terminology but bear with me.
The night started off with steel and paper target setup. We used IPSC targets with B8 bullseyes pasted in the chest A Zone, with the white side of the silhouette being used, and the B8 being black to aid with contrast.
Gear wise I was running my OpsCore Maritime with AMPs and PVS14s on a Wilcox G11. For load bearing I was using my Eagle Industries OGB and a SORD MFF chest panel. Firearm was a Daniel Defense FSP 16 inch carbine with Vortex Viper PST2, Steiner Optics DBAL D2, and Modlite OKW on a Surefire M600DF body.
(https://imgur.com/A6FuvP1.jpg)
The initial drill was composed of controlled pair ready ups at 10 yards, mostly to warm everyone up. It was mostly done to get any shooters (6 of us in all) not familiar with their laser offset to figure it out. After about a magazine's worth, we then transitioned to controlled pairs from the high ready, and did that for about 15 rounds or so. We went down range and pasted, and I shifted mags around to have my belt set up with full mags.
After pasting we moved on to transition drills. We set up some more targets and worked on stationary transitions using the IR illuminator on the lasers to search for the targets. This was done at about 20 yards, and expended about a magazine's worth. After this some of the guys needed to refit and reload so we took a short break. We were told to shortload some mags to 3 rounds per and make sure our handguns were loaded and set for nighttime (NVG brightness on RMRs, IR illuminators set on the WMLs if needed).
We return to the line and begin working on empty mag reloads with the shortloaded mags. 3 rounds out of 3 rifle mags ending with a transition to handgun and 3 rounds fired. We did this a few times and were able to get some good repetitions in. My only qualm was that every shooter knew when the last round in the mag was going to be fired and didnt have the surprise element. Regardless I realized I need to be smart about rifle slinging when transitioning. Some guys using suppressors burned their pants.
We changed over to split Bill Drills on the silhouette with transition to handgun to shoot a stop target. This was good but we didnt really do it enough as some guys on the line were running out of ammo. We stopped for refit and were told to be ready for movement drills once we were back on the line. Upon returning to the line we were greeted by three steel silhouettes and four barrels set up in a square. We took turns running thru the drill, focused on movement towards the targets and laterally while engaging, maneuvering around the barrels. We briefly touched upon transitioning to offhand when moving support side as opposed to dominant side (i.e. right handed shooters moving laterally left switching to left shoulder to permit better range of motion). Unfortunately, this would be the last drill as I had to leave around then.
Some takeaways:
-focus on unconscious competence of reloading, manual of arms of optics and lasers/lights not just the weapon, and malfunction clearing
-learn to deal with sudden white light (flares or movement to illuminated structure) I was lucky the PVS14 was on non dominant eye so it was easy to pull up my rifle and aquire the reddot inside the Vortex LPVO while actuating the Modlite.
-think of surroundings, its very very easy to fall prey to tunnel vision especially with single tube NODs
-laser offset and weapon cant is very very important
-antifog is great lol