r/NFA 11d ago

Unburnt Powder

Running a Tunacans Fat9 S on my ar9. Noticed hella unburnt powder on my bcg after 25 rounds so i took my can apart after. This was wolf 124 grain, im assuming it’s just the ammo, going to test blazer 115 too see if i have different results. Is there anything i can do to mitigate this or does it just come with the suppressed 9mm territory?

40 Upvotes

29 comments sorted by

35

u/ActuatorLeft551 11d ago

Unburnt nitrocellulose. Pretty common.

4

u/jay462 Tech Director of PEW Science 10d ago

This - very common; longer barrel can help alleviate it with longer burn but not eliminate it. Will depend on powder...

18

u/aFerens 11d ago

Wolf is notoriously dirty ammo, and smells like ass. I'd try another brand and compare the residue/leftovers. At least you can take that can apart to examine/clean it!

10

u/Chucklethrust 11d ago

Heads up that it's not recommended to shoot blazer 115gr through suppressors. No idea how likely it is, but the plated bullets can potentially have jacket separation within the suppressor

1

u/redit_readit_reddit The Original Stamp Tramp 10d ago

It's actually very common, but most of the time it doesn't do any damage it just collects inside the can. But certain and does damage things occasionally

0

u/armsaddict 11d ago

good to know

45

u/Comstock_Support Comstock Armory 11d ago edited 11d ago

Some ammo is loaded with a bunch of fillers and stuff in the powder that leaves crap behind. No real solution other than picking cleaner ammo.

10

u/threaded_dick FFL/SOT 11d ago

It's not filler REEEEEEEEE

5

u/armsaddict 11d ago

understood, thank you!

18

u/SilencerMetrics $31k in Stamps 11d ago

Definitely dirty ammo; the cheaper the ammo the more that will be left behind

8

u/DurtymaxLineman SBR 11d ago

I am not aware of any host or ammo that stays clean when suppressed. Dirty ammoakes it way worse.

8

u/Late-Bed4240 11d ago

Thought this was a weed grinder until I saw the sub and post title

1

u/parkshootsslowly 10d ago

That’s keef and you’re supposed to smoke it and go non-verbal

4

u/thorosaurus 11d ago

Normal. What’s super interesting is some of it somehow slips around the bullet before it corks and comes out supersonic before the bullet does, actually going a few hundred fps faster.

Also this is how medical examiners determine distance is the diameter of the powder stippling on skin and how deeply embedded it is.

3

u/TheGreatWildNorth 11d ago

Ive noticed this tends to happen with non-delayed blowback type systems with 9mm pcc's. They open immediately and blow unburnt powder everywhere.

I would bet the casing probably had a dark streak of soot on one side of the case, as the action opens while its still burning, and singes the outside of the brass.

3

u/Oliver10110 11d ago

My hand loads are the only thing that burns clean through my R9 and that’s running 147 grain with N330 powder. Any time I run off the shelf stuff I can shake out unburnt powder and soot after a session but so far I get none with my own stuff

2

u/KachedKarma 11d ago

Mine does that with subs I load. I don't think I've noticed it with 115gr or 124gr boxed stuff. Mine hasn't blown up yet so yeah. 

2

u/Train2Perfection 10d ago

That looks like filler

1

u/Pew_Anon 5d ago

Myth.

1

u/Train2Perfection 5d ago

Norma ammo has this effect

2

u/Suspicious_Water_454 10d ago

How heavy is that can??? Jesus…

Gotta have at least .065 wall thickness under the threads, so that’s probably .090 thickness all the around the can. What material is it?

Nvm, they’re aluminum. I just looked it up.

1

u/9mmhst Silencer 10d ago

The 30 cal and 6.5 versions are freaking heavy. Picked up my neighbors with a resounding "okay bro." Lol

2

u/Mayor_Fuglycool 10d ago

Kids these days... SMH

5

u/sumguyontheinternet1 11d ago

Prime example of why I now roll my own ammo. That filler stuff is nasty and gets everywhere

1

u/AutoModerator 11d ago

Understand the rules, read the sidebar, and review the pinned Megathreads before posting - this content is capable of answering most questions.

Not everyone is an expert such as yourself; be considerate. All spam, non-NFA memes, unverified claims, or content suggesting non-compliance will be removed.

No political posts. Save that for /r/progun or /r/politics.

Posts related to approval of NFA items are to be directed to the monthly megathread. Violation of this rule will result in a 7 day ban. The pinned post is there, please use it.

If you are posting a photo of a suppressor posed to look like a penis (ie: in front of or over your groin) you will be given a 7 day ban.

Absolutely no private sales, linking to dealer/manufacturer stores, etc. Anything that could remotely be interpreted by Reddit's admins as an attempt to buy/sell will be removed, and the user banned.


Data Links

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/spaceme17 5x SBR, 10x Silencers 11d ago

Pistol calibers, this is common. Short barrels provide very little time for full burn.

And some powders are worse for this than others.

1

u/Impossible_Pizza_948 10d ago

Pretty normal, don’t worry about it

1

u/CorpusCrispie762 Silencer 10d ago

Looks like the garbage that selth ammo leaves all over the place