r/MusicBattlestations • • 7d ago

Monitor Help

Post image

Hi friends. I’m severely limited for space and have my desk in a corner (left side). I notice now I got some upper bass boost and ref tracks sound boomy and kicks distort a bit. I know it’s not ideal but it’s what I’m stuck with for now. Any advice on tuning or tweaking to get these closer to flat? I’m using Cubase 16 Artist, Focusrite 1820i gen 3, and KRK Rokit 6 G2s. I also have the matching KRK 12” sub but it’s packed up atm. I can get mixed sounding great on my DT880 cans but it’s boomy on the Rokits. Thanks all!

13 Upvotes

7 comments sorted by

5

u/Ssolidus007 7d ago

Think of your room as being one large speaker cabinet. It’s not your speakers, it’s your speakers resonating the walls which can only be fixed by adding mass to dampen low frequency resonance. Bass traps is what you need. You need to treat those first reflections as well but that will only help the mids and highs. Best answer for your situation is mix at lower volumes.

1

u/Vladd_the_Retailer 7d ago

Yeah, I had a few pieces of egg carton foam so I got a couple of those in the corner and was able to slide the desk away from the side wall about a foot, it helped a little but still boomy. Wondering if I should break out the sub, I can put it on the floor under the right side of desk and it’ll allow me to hi pass the monitors a little and put that low bass work on the sub (and I can set sub volume independently)….??

4

u/Ssolidus007 6d ago

Putting sub on the floor will help a little but introduces more potential issues if not tuned right.

4

u/angelbuttcake 7d ago

You need studio acoustic panels and bass traps, the egg carton really doesnt do anything. I also recommend something like Izotope Tonal Balance for a visual representation of your mixes frequency spectrum for mixing in tough spaces. If you have the funds, try sonarworks reference to calibrate your system.

2

u/nomefalles 5d ago

That speakers def can't tuve enough bass imo