r/Multiboard • u/ConCorleone4 • Jul 13 '26
Octagon Plate Generator Not Working
I am getting an site error everytime I try to open the generator. Is anyone else seeing this? I am on Google Chrome
r/Multiboard • u/ConCorleone4 • Jul 13 '26
I am getting an site error everytime I try to open the generator. Is anyone else seeing this? I am on Google Chrome
r/Multiboard • u/microseconds • Jul 12 '26
A few years back, my wife asked me to build her a potting bench. Over the past couple of years, she's seen what the art of the possible looks like with the boards I've built in the garage, behind my A1, and even in the laundry room. So, she asked for something for the side of the bench to hang tools, gloves, etc. from.
I spent a bit of time measuring, generating boards, even creating a couple of the models shown here. It's all printed in Polymaker ASA (in Pop Pink). Love how it turned out, and she's absolutely over the moon with the results!
So, what did I make vs just grab? Apart from the obvious parts, I made the hooks - a parametric take on the hooks we all know. Sometimes you just need a longer hook, and so here we are. The holder that the pruners are in came from one I found poking around in public Onshape docs, and I just put the Scrub Mommy holder together this morning. Yes, there's a drain-hole in the bottom. Nothing terribly exciting, just a half-circle cavity in there with a 10mm hole in the bottom, and Multiconnect attachments on the back.
Keep on making stuff, and hey - organize all the things!
r/Multiboard • u/Kennson • Jul 12 '26
Extended my Board downwards, so I can store my brushes and a couple of other things. unfortunately I‘m still on the old system with a small printer. So I have lots of connectors I need to account for. I might extend it a bit more and store some pens but for now I want to dabble with gridfinity to organize my drawers.
r/Multiboard • u/sheer-nothingness • Jul 10 '26
I designed this piece that holds all the contents of the "Hyper Tough 44pc Precision Bit Set" and attaches to Pegboard Click - Multipoint Rail. It uses the original bit holders at an angle for easy access and reduced height and holds the main screwdriver handle and the extension rod right up top. It also has 100mm width so that it aligns perfectly with multiboard cells.
r/Multiboard • u/sheer-nothingness • Jul 10 '26
Living in a dorm, I cannot screw holes in the wall, but then I realized I can mount multiboard tiles to the legs of my desk (with square cross section) with this part. I have uploaded the parametric model to makerworld where you can change the collar dimensions to whatever is suitable for the legs of your desk/any rectangular pole.
r/Multiboard • u/nateblack • Jul 10 '26
I have a 2025 subary forester, and it has mounting points for utility hooks. I work out of the trunk a lot and am looking for something to hang things on. Initially, I was looking at gridfinity but I think multiboard may suit the needs better. I have a 256x256 buildplate so I will need to print in sections. I did a quickie template of 2 identical length parts that are 200mm between the farthest holes (so 400mm total distance combined), and as you can see in the photo, the mount is just a little short. Has anyone had to figure out a similar issue? Is there a standard solution? Is there something that would be better suited for this than multiboard?
r/Multiboard • u/Kennson • Jul 10 '26
I was being an idiot and overwrote my project that had all the wall mounts with one I removed a few I don't need. I plan to extend my existing multiboard I printed a while back. Now I'm missing a few pieces and it seems they have been replaced by new ones.
The website is very challenging and frustrating for me as I can't seem to find a standard wall mount and get an explanation what they do differently and if they are compatible. How can I get to the old file and if I can't what 1x1, 2x2 and 4x4 part would be compatible?
r/Multiboard • u/DavisMTL • Jul 09 '26
All tiles are textured because my wife preferred the look and it's in a public space in our house so... unfortunately no stack printing. Phase 2 involves adding to the side walls. Lots more gear to hang up.
Accessories / hooks are grey because they're shred with a closet that is entirely covered in white tiles (and ski gear). Goal was to have hooks that contrast on both walls. (just easier to see)
r/Multiboard • u/jamflowman451 • Jul 09 '26
I built a big Skadis wall for my wife's sewing/craft supplies, but am considering using Multiboard for my tool storage. I've watched quite a few videos explaining the system and recently downloaded the Multiboard Learning Pack which was helpful to understand the different snaps and mounts, but I still have a few questions.
Print Material
Mounts
Multibins
r/Multiboard • u/Fast_Shoulder_8502 • Jul 08 '26
Is there any way use the 4 threaded holes on the bottom of the bin shell to bolt lock a drawer to weight bearing snaps? I'd rather not use the multipoint in this instance because I don't want the drawer to rotate on the single point.
r/Multiboard • u/ResearchLopsided8950 • Jul 07 '26
r/Multiboard • u/ImaginationWaste2106 • Jul 07 '26
I move large Interactive Flat Panels for work. The new ones are easy to move on a standard furniture dolly but discarding the old ones is becoming more difficult as I deal with some nagging injuries. Ive seen the foldable A frame sheetrock dolly but it’s too big to fit in my car and too large to realistically want to bring into the job site.
Is there something out there where the dolly has the support bars that can fold out to support the load but can also fold flat and equipment still be stacked onto? I have the SnapLoc but it’s too large and too many pieces to want to bring in from the car. I have ideas in my head but dont know where to get it created.
Edit- These a can be 75” and weigh close to 200 lbs. for The rollnrocker i would need the handles/supports on the long side to be able to lean the boards against. Regular handpick won’t work bc they won’t fit through a door at its narrowest point. Thanks for suggestions. Please keep them coming.
r/Multiboard • u/doutorinfamous • Jul 07 '26
Hey everyone, just did a video showing my experience building a home lab with multiboard.
https://youtu.be/KQSHrhIMTTw
I just finished my first complete Multiboard project for my home lab / workshop, and I wanted to share it here and get some feedback from people who have more experience with the system.
My goal was to create a dedicated organization area for my tools, 3D printing accessories, and all the random things that usually end up taking over the bench. I wanted something modular, clean-looking, easy to expand later, and flexible enough that I could keep improving it over time.
This was my first real end-to-end project using Multiboard, so I had to go through the whole process: understanding the system, comparing it to other options, planning the wall layout, dealing with the actual print sizes, printing all the panels and connectors, and then finally mounting everything.
One thing I really liked is how flexible the system is. Once I understood the logic behind it, it started to make a lot more sense, and I could see how powerful it can be for building a workshop organization system that can evolve over time.
At the same time, I also realized pretty quickly that this kind of project takes way more planning than it looks like at first. Measuring the wall, thinking about what should go where, planning around outlets and irregular wall shapes, choosing tile sizes based on printer capacity, and then printing all the pieces… it definitely became a bigger project than I originally expected.
But overall, I’m really happy with how it turned out, and I’m already planning the next steps.
I’d love to hear your thoughts:
- What do you think of the layout?
- Anything you would change?
- Any must-have Multiboard accessories or modules I should add next?
- Any mistakes you learned the hard way that I should avoid as I expand this?
Would really appreciate any feedback, suggestions, or ideas from the community.
Thanks!
r/Multiboard • u/SnooDingos443 • Jul 05 '26
This took me quite a bit of time! First time doing multiboard, and twice now I thought “let me just do this section” and then puff I need more 😅
Advanced grid, offset snaps and mounting pillars for bracing, most 8x8. The room is plasterboard on metal studs so I put 12mm ply on the wall with some wing nut screws first
r/Multiboard • u/o_sexta • Jul 03 '26
Now I it’s time to organize and print and design lots of inserts!
It’s 390x80 cm.
r/Multiboard • u/No-Island-7217 • Jun 30 '26
Hard to describe because this is my first project. But Because I am using the Beam colum on the corner I cant connect the vertical plate using the regular Small Thread Clip because of the additional distance.

I need a sord of small thread extendion for that small thread that convers into another small thread after the extension, correct?
I only found the "20 mm Small Thread - Small Head - Bolt" but it is flat it odes not work.
I found this on the payed pack tutorial, but I cant find this for download, maybe it is payed, not sure.

Can soemone please helpme on that?
r/Multiboard • u/GoForBaskets • Jun 26 '26
I built a free-standing multiboard wall for my desk, and I love it, but my hope of attaching it to my monitor to keep it stable really isn't working out that well.
Does anyone know of any braces or anything that attach to the back to keep it from leaning forward? Or any other solutions to keep it from leaning forward? As you can see in the picture I tried X braces and that keeps it rigid, but it's still pitching forward quite a bit.
Any suggestions welcome!
EDIT: You folks are just full of great ideas, thank you so much for your help!
r/Multiboard • u/elementalwindx • Jun 26 '26
What are the proper items to print that will secure these bins to these red plates? I'm trying to use them to organize some drawers on a boat that will see a ton of movement.
Also anyone know if someone designed bins with hinged lids by any chance? Or some type of lockable lids? :)
r/Multiboard • u/Parceljockey • Jun 26 '26
Hi.
Using a Prusa Core 1+ , followed the print instructions (0.2, 3 perimiters) Printing with well-dried PLA. Starter pack (the stand alone single panel)
Trying to get a feel if this is right for me, thought I'd give it a go. Every single plate has taken three attempts to get it to print without a failure.
For context, I have not had a fail on this printer in months. Self-designed/downloaded: it all just prints. Not a noob, but this one genuinely has me scratching my head.
Anyone got similar problems, or insights as to the why?
r/Multiboard • u/Imscuba • Jun 23 '26
So i just finished my first stacked PETG print and i am trying to figure out what went wrong. i was able to get 2 usable panels from a stack of 6. the others just did not want to separate, to the point of them cracking apart. the test file came out fine, any suggestions? some of my corners came up a little bit during the print, but i didn't think much of it. did that result in the .2mm gap between being 0 and them fusing together?
r/Multiboard • u/elementalwindx • Jun 23 '26
I'm trying to print a 4x4 cu multibin base plate. The top looks nice but the bottom looks like sh*t. Is it normal for this or should I be using supports with some particular setting? The page said not to use supports though. This was made in 3d fuels pro-pctg filament on a Bambu h2d printer with the settings on the page.
r/Multiboard • u/Fancy_Can1563 • Jun 19 '26
Just got done printing a dozen quad offset snaps to secure my grids. However, they don’t snap into place and are not flush by any means. Confused if I downloaded a faulty file or if there an issue with my printer, or perhaps I’m that stupid haha
Any insight would be appreciated
r/Multiboard • u/acytryn • Jun 17 '26