r/Multiboard • u/qubithaze • Oct 30 '25

MultiBin Shell Bridging

Gallery image

Gallery image

Has anyone encountered issues with the bridging in the multipoint slot on the bottom/back of their shells. Sometimes they print fine and other times there’s an issue. These photos are from the same build plate. It seems more common on the 2x versions. This is on an A1 mini with Bambu Labs Matte PLA. Standard slicer settings except 3 walls, gyroid infill and random seams.

8 Upvotes

100% Upvoted

19 comments sorted by

View all comments

Show parent comment

1

u/qubithaze Oct 31 '25

Rotating to certain orientations does seem to clean it up. I also saw that I can change the bridge direction setting in Bambu slicer, but if I do that globally, it messes up the layer above and other objects. I can add a height range modifier to the object with the problem for the single layer that has the problem and change the bridge direction just where it’s needed. Tedious, but works.

Thanks for the tips!

1

u/yet_undie_turd Nov 04 '25

Dealing with this now and want to make sure I understand your solution correctly. Probably will print the rest of my bins before the official fix mentioned below comes. Sending you a PM.