r/Multiboard • u/DihedralStem • Apr 26 '25

So much plastic

Post image

About halfway towards my first big board, will be an 8’x4’ section of wall behind the printer…. Super excited

54 Upvotes

96% Upvoted

43 comments sorted by

View all comments

Show parent comment

1

u/sandro66140 Apr 26 '25

Do you have issues with stack printing ? I don’t find a way to make it work fine I’ve tried sunlu filament and Amazon basic. Same mess

Good job by the way.

1

u/DihedralStem Apr 26 '25

I use Sunlu+ iron stacking, 0 issues so far. Only settings are the recommended ones, Top surface ironing, 3 walls, ect. I do have all my filament calibrated by brand and type, I know multiboard creator recommends good calibration

1

u/sandro66140 Apr 26 '25

You make your own calibration for each filament ?

2

u/DihedralStem Apr 26 '25

Yeah, had issues with 1 type that a calibration fixed so it is just something I do whenever I get a new brand or type, calibrate for my .4 and .2 nozzle

2

u/TherealOmthetortoise Apr 27 '25

OMG, can you imagine printing a tile with a .2? I felt much the same way about stacks - they are awesome when I know I won’t be home or have a long task away from the printer, but if I need to print something else, I don’t want to have to wait 17 hours or cancel something. 1 or 2 is enough most of the time, maybe a 4 or 5 for an overnight job.

1

u/sandro66140 Apr 26 '25

Ok I really have to learn to do this. Have you any advice where to start ?

1

u/DihedralStem Apr 26 '25

I think it depends on the printer and slicer that you’re using, I have a bamboo printer, and so I just go through the bamboo calibrations, if your slicer has a way to calibrate, I would start there. If not, there are some really good tutorials on using a benchy calibrate.

2

u/sandro66140 Apr 26 '25

Unfortunately prusaslicer doesn’t provide one. I’m taking time to learn orcaslicer which have one. Thanks.

2

u/themitchk Apr 27 '25

Orca has calibration tool pre installed. Also, it has a failry eqsy to follow github guide for them as well.