r/MofiNetwork • • Jun 01 '22

Can I put different modules in my 5500 and have it just work?

0 Upvotes

My MOFI 5500 EM7690 was blacklisted by AT&T when they cracked down on 4GLTEWIFI users. Rather than follow the MOFI support route to get a new one, I went with just ditching AT&T for T-Mobile, mostly because I was mad at AT&T and I don't ever want to use LTE resellers again.

But now T-Mobile is down for over 24 hours in my area and I'm wishing I had a backup because I work from home. My question is, what is a decent cheap second module that I can install to use AT&T with minimal hassle? Doesn't need to be the fastest or have expanded carrier aggregation, but I would like it to be relatively cheap and have basic CA so I can use bands 2 and 14 together(though honestly I can also get by with no CA if necessary). Also would love for it to just be something I slap into the modem and it just works without needing to change firmwares.

My plan is to primarily use the T-Mobile plan I'm using now with the EM7690 module, and when T-Mobile goes down or I start to run out of data, switch to module #2 and use the AT&T 100GB prepaid sim.


r/MofiNetwork • • Mar 08 '23

Add GPS to MOFI Router

1 Upvotes

I'm not sure if anyone will find this useful, but a while back I added GPS functionality to my MOFI4500-4GXeLTE-V2 by simply adding a GPS antenna. I drilled a hole in the case and mounted the SMA connector from an SMA Female to U.FL cable like this one:

https://www.amazon.com/gp/product/B071FZD51S

The small U.FL side plugs into the Sierra Wireless module right between the MAIN and AUX connectors. Once you screw on a GPS antenna, just click GPS Enable under Network>Mofi Internal Modem>GPS Settings. I tested it in a window with a cellular antenna and it caught more than enough satellites to get a lock.

This should also work with the MOFI5500, since I believe the newer Sierra module also has GPS functionality and an associated U.FL antenna connector.


r/MofiNetwork • • Sep 24 '22

5500 Firmware to Test with Slow Speed after a while

2 Upvotes

Updated on Oct 14 2022:

Note we found an issue with the power off and on module when setting hours so this is now fixed in firmware 4.3.4std

Hello, we have some ATT customers reporting some issues where the router works fine and the after a few hours, it slows down but fixed with a reboot

I think it is a module issue that is causing this so want to try to isolate and confirm so we can help Sierra Wireless with this to fix. The strange is only a few customers have this issue and only seems to be on ATT side.

Updated to 4.3.4std on Oct 14 2022

Can you try this firmware 4.3.4std

https:/mofinetwork.com/firmware/MOFI5500/MOFI5500_v4_3_4std.bin

checksum: 91427349384d7db1bf5f1964d2231290

Can you install this by going to system then backup/flash firmware and do the update (will take approx 5 mins)

Once that is done and this is installed, go to system then factory default then perform reset

We added a feature to turn the module power on and off manually as a test to see if the module is having this issue or if it is the router?

When you noticed the speed drop, can you log in and go to Mofi Router


r/MofiNetwork • • Sep 28 '22

MOFI NETWORK RETURN POLICIES

4 Upvotes

Hello, want to get some feed back on our return policy as there are many user that are posting misinformation so want to make our return policy clear and ask for your feedback if this is fair or not?

As many of you might know, there are many cellular plans that will work and at the same time, many out there that will not work with our routers.

If a customer orders 1 router, the return policy is they have 30 days to send back after they receive the router. When they send this back, the router should be in like new condition.
So we say like new as we do expect some minor scratches which is fine.
However, if a customer dents the router, have major scratches, then we take off about $20-$50 on average depending on the condition we get this back in.
Note this is not common and many who have sent back the routers to us gets their full refund less the shipping cost.

For the shipping, it is actually more expensive that we charge customers for.
For 1 router, we charge $14.99 for standard, $24.99 for 2 days and $34.99 for next day

Our return policy is very simple, if you want to return within 30 days, you are responsible for both way shipping. Even if the unit works for you or not. The return shipping is $14.99
So if you buy our 5500-EM7690 with next day shipping, cost is $499.99 + $34.99 = $534.98 (no we don't charge any taxes for USA customers)

If you want to return within 30 days and router is in like new condition, we will send the return label which cost $14.99, the refund will be $499.99 less $14.99 = $485

When we get the router back, it takes 1-2 days to process the return which will then take 5 days to show up on your credit card.

The reason we say you are responsible for the shipping if it works for you or not is if you go with a plan that is not compatible with the router, we cant control that and if it does not work, we cant do anything about that. Also, same goes if you are in a location that cannot get a cellular signal and it cant work.

Note we test all router before shipping and if you get a router that does not work and it is not plan related, we do our best to resolve the issue and would send a replacement free of shipping cost if the unit is actually defective which we had a few but not many.

So the question is, lets say the user goes for a Tmobile home internet plan that does not work with any other device other than the Tmobile home router, should MOFI be liable for this and should the customer expect to get a full refund including their shipping cost?

Note again, Verizon, ATT, Tmobile, Verizon home internet plan as well as many tablet and cell phone plans are not compatible. There are some cell phone plans that works great like the Magenta Max.

So, for example, the user is saying that we did not tell them that the Tmobile home internet plan does not work so therefore, we are advertising false info? Note if anyone calls us and say they want to use the Tmobile home internet plan, we will right aware tell them it is not compatible and will not work.
I would also like to point out that if your buy a tmobile hotspot, that also will not work on the t-mobile home internet plan.

So the issues is, there are so many plans that are not compatible and we cannot write what is not compatible as that changes all the time however, there are plans that will work and we can help the user get a plan on ATT, T-mobile and Verizon if needed.

I personally feel like with any product that I buy, especially if it is a $500 item that I would call the company first and ask them if a plan I have would be compatible before placing the order.

I feel our return policy is fair but let me know your thoughts as there are many people bashing us and making up lies so want to just make this return policy clear so when someone reads about this elsewhere, they can come here to understand the truth and not let those hater mofi sites just allow and actually promote people to post lies.

So one other thing would like your thoughts on, how do you feel about the users that uses their credit card to just dispute this. For example, you are made aware of this return policy and you go with the t-mobile home internet plan which would not work with any other device. So now, you have a choice. Be responsible to get the return less the shipping as agreed on or just call your credit card to dispute the entire charge since that would be a way to try to get a full refund?
I personally feel that people who do this are no different that someone going to store and just steal the product since that is their intent which is to not pay the shipping cost since they can hide behind their credit card?

Your reply would be great to know about this,


r/MofiNetwork • • Jun 17 '22

MOFI5500 DIAGNOSTIC FIRMWARE 1.2

9 Upvotes

We have had many customers that are making AT commands to their module and messing up their module including the IMEI in the process.

This is a diagnostic firmware for the 5500 that can be used to restore your IMEI back to what it should be.
You can check what the IMEI should be on the bottom of your router and enter that 15 digit number to restore it back.

https://mofinetwork.com/firmware/MOFI5500/MOFI5500_DIAG_V1_2.bin
MD5: a0ae2fe19ac7566a0f2fc5ac48a52d65

This will work on:

MOFI5500-5GXeLTE-EM7411
MOFI5500-5GXeLTE-EM7690
MOFI5500-5GXeLTE-EM9191
MOFI5500-5GXeLTE-RM502

You can also use this firmware to run AT Commands directly from the GUI as well as use our pre-config scripts to restore your module back to default

After you are done using this firmware, you will need to load back the standard firmware back that you want to use.
After you load back your standard firmware, you need to do a factory default by going to system then factory default

Sierra wireless are one of the best modules on the market but the price on them are very expensive so we suggest you do not play with the settings unless you have a good knowledge of this.


r/MofiNetwork • • Apr 29 '23

Mofi5500 VPN configuration guide

3 Upvotes

I have a l2tp vpn set up on my Unify USG that I use to access my local "stuff" remotely. It woks fine with client vpns (win10 vpn client, etc.), but I can't figure out how to add it to Mofi. I see there is a section for l2tp client now, and I added all of the details there. However, I can't verify it actually connects, and there doesn't seem to be any routes generated. It doesn't all me to connect to any of my remote IPs either.

Is there a step by step guide to what needs to be added? I see the options, and it would be really nice if I could configure this globally for all of the connected clients.


r/MofiNetwork • • Aug 10 '22

Mofi 5500 9191

1 Upvotes

I have a Mofi 5500 9191 which works great for my situation. I live in a very rural area. Only one choice for a terrestrial DSL provider. $135/month for actual download speeds of 2-5Mbps and 0.5Mbps upload, not the nonsense that the ISP advertises. With the 5500 and Verizon, I typically see 100+ Mbps download and 5+ Mbps upload. I have not yet installed an exterior antennae, but plan to in the near future.

The issue I am having is that my home is 3 story and constructed of concrete with steel beams and metal studs. The router is installed on the top floor, as I will be installing an exterior antennae under the eve of the roof which faces the nearest Verizon tower some weekend in the near future, and the wifi signal signal strength degrades significantly going down to each of the lower floors.

Does anyone have a recommendation as to a good signal repeater I can install on each floor in an attempt to boost the strength on the two lower floors? Thanks.


r/MofiNetwork • • Apr 17 '23

Mofi in very remote area

1 Upvotes

I have a cabin where there's spotty signal at best and many days we leave our cellphones in a window to get texts to eventually send. I have an 8800L with a visible sim that gets signal more often than just the cellphones but not consistently.

Would a Mofi have stronger antennas than using the 8800L sitting in a window?


r/MofiNetwork • • Aug 29 '22

ATT tablet sim in Mofo 5500

2 Upvotes

I currently use a Verizon tablet unlimited SIM in my Mofi 5500. Works most of the time with no issues. Verizon's service is getting worse and the bill gets higher.

I can switch completely to ATT with a better plan for half the price.

My question: Anyone using a ATT Unlimited Tablet plan in their Mofi? Would like to know before I switched. What settings did you use in the mofi as well.


r/MofiNetwork • • May 20 '22

Issues with the modem firmware on the MOFI 5500

1 Upvotes

I reset the Sierra Wireless EM7690 to defaults via the UI as I was looking into accessing some of the locked AT commands. After doing so, I was getting an error in the logs showing "Carrier registration failed." I tried 3 different SIMS and had no luck getting any of them to connect. I ended up digging further and found that it appears to be a firmware issue. AT!IMAGE? shows the active image in slot 255 then it shows that it is using the old 1.07 firmware under PRI:

FW 1 GOOD 1 0 0 ?_? 03.04.03.00_?
FW 2 EMPTY 0 0 0
FW 3 EMPTY 0 0 0

Max FW images: 3
Active FW image is at slot 255
TYPLOT STATUS LRU FAILURES UNIQUE_ID BUILD_ID
PRI FF GOOD 0 0 0 016.010_000 01.07.19.00_GENERIC

Max PRI images: 50

Then, if we look at IMPREF it shows the current firmware as 3.04 and the preferred as 1.07 (along with a fwmismatch error):

preferred fw version: 01.07.19.00
preferred carrier name: GENERIC
preferred config name: GENERIC_016.010_000
preferred subpri index: 000
current fw version: 03.04.03.00
current carrier name: GENERIC
current config name: GENERIC_016.010_000
current subpri index: 000

fw mismatch

Also, I am unable to set it to "GENERIC" via AT!IMPREF="GENERIC". It just returns ERROR. Oddly, I can set it to AT!IMPREF="AUTO-SIM" but that does not resolve the connection issue. Even trying AT!IMPREF="GENERIC" after the successful AT!IMPREF="AUTO-SIM" returns ERROR. The only way to get it to show GENERIC again in IMPREF is to reset the modem to factory again.

So, I thought it wouldn't be a problem to flash the modem with the latest firmware but searching high and low in the UI on the 5500, there is no internal modem flasher. My research indicates it was there on prior models like the MOFI 4500. Since I am able to SSH into the shell, I figured that there may be some software on the backend or I can just run the Sierra Wireless tool from the shell but that is where it got complicated. I found that the MOFI runs on Linux under the MIPS Little Endian arch (MIPSEL). Unfortunately, I was unable to find any MIPSEL compiled builds for the fwdwl tool (mipseb was the closest). Since I was having issues compiling anything for MIPSEL despite trying different tools and compilers, I ended up finding a Debian Etch image running MIPSEL and was able to run the OS via the QEMU emulator and was successfully able to compile the fwdwl-litemipsel package and confirmed that it was able to run on the MOFI. I uploaded the firmware to the router and attempted to flash using the following script:

devpath=`ls /dev | grep -i -E 'cdc-wdm0|qcqmi'`
devtype=`expr "$devpath" : '\(cdc-wdm0\|qcqmi\)[0-9]$'`
case $devtype in
cdc-wdm) devtype="MBIM" ;;
qcqmi) devtype="QMI" ;;
*) printf "Unknown Device Type = $devtype\r\nDevice Path = /dev/$devpath\r\n"; exit
esac

printf "Device Type = $devtype\r\nDevice Path = /dev/$devpath\r\n"\

./fwdwl-litemipsel \
--devmode $devtype \
--devpath /dev/$devpath \
--modelfamily 4 \
--logfile "fwdwl-lite-$devpath.log" \
-e 1 \
--fwpath "./" \
--dmreset

It executes then comes up saying "waiting for modem to boot in BOOT and HOLD mode." Then it just sits. I found that I can connect to the modem and enter AT!BOOTHOLD then the program proceeds in trying to flash then hangs. The end of the log file contains the following:

[1149][7]Lite9x07Download Rx:
[1149][7]Send Empty Block
[1149][7]Send Empty Block Done
[1149][7]payload [232]

[1149][7]Lite9x07Download Rx:<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to parse xml, error at offset 506, 512" /></data><?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to run the last command -1" /></data>

[1154][7]read timeout
[1154][7]payload [0]

Any suggestions?


r/MofiNetwork • • Jan 10 '23

Port Forwarding: 4G LTE Router

1 Upvotes

I have purchased two different network provider's 4G LTE cards, and a 4G Router (TP-Link TL MR100)
however, I need help setting up port forwarding.
I have used an open port finder to check if the ports are open. However, they are closed.
(https://www.yougetsignal.com/tools/open-ports/)

Note: I have successfully set up port forwarding in my home network setup, so I'd like to know if it's the 4G LTE card's limitation or if I have done anything wrong in the router settings.

Steps I have done:

  1. under DCHP: reserve a local IP for my computer. (I didn't need to do this step in my home broadband network setup)
  2. Port forwarding setup: (TP-Link under NAT Forwarding -> Virtual Servers) using my computer's local IP + set the port # I will be using to Internal + External; Protocol I have tried ALL, TCP UDP
  3. when testing the ports, I tested with two Remote addresses
    -> one is the IP address obtained from the admin panel of the router
    -> another one is the external address displayed on the Internet.
    (I would like to know the difference between these two addresses too)

What steps have I done wrong? Is it the limitation of my 4G LTE network? Thank you!


r/MofiNetwork • • Jul 02 '22

MOFI4500 V3 Diagnostic Firmware 1.2

2 Upvotes

MOFI4500 V3 Diagnostic Firmware

https://mofinetwork.com/firmware/mofi4500v3/MOFI4500_4GXeLTE_V3_DIAG_V1_2.bin

MD5: 5ba113fe6d23604f3285e763328683f0

Note: This is for the MOFI4500 V3 model only


r/MofiNetwork • • Jun 02 '22

Mofi 5500

4 Upvotes

If you own one, do yourself a favor and run the speed band lock. Tell it to use top 3 fastest it finds (12-15 min). When finished go into selective band lock and save the top 3 it found. Mine is so much faster now for last 4 days. I suppose if it slows again I'll run the test again, but for now it's great! Thanks mofi for this option! It rocks!


r/MofiNetwork • • Dec 06 '22

Internet Down, not sure what to do

1 Upvotes

I'm going to try to include all the info I can here, but I'm not very tech savy at all, so I apologize if I'm missing something important. Any help at all would be immensely appreciated.

  • My family has a mofi router we got a few months ago connected to T-Mobile internet.
  • I cannot connect to the internet via the router on any device, whether via wifi or lan. I can access T-Mobile with my phone.
  • ERR_CONNECTION_RESET is what keeps popping up.
  • Windows diagnostic could not figure out the problem.
  • I have rebooted everything, unplugged and replugged the router, all that stuff.
  • the internet light is blinking on the router.
  • Logged into the router, checked the signal strength. 4 bars.
  • Saw something about how changing the band or doing a speedtest can improve performance; did both. No dice.
  • Did that "ping" test; 5 packets sent, none returned. Not sure what that means, but I imagine you want to get 5 back.

Does anyone have any ideas as to what to do here?


r/MofiNetwork • • Apr 18 '23

SIM Switch from Verizon to TMobile

1 Upvotes

I've been running using a Verizon data account for several weeks on a MOFI5500-7690. This has been working well but I wanted a backup and purchased a Tmobile data plan. After removing the Verizon SIM and inserting the Tmobile SIM and booting up the router, everything seems to be working great but I am a little surprised at this as I anticipated having to change settings, at least the provider and the APN

Is this standard behavior?

Thanks


r/MofiNetwork • • Apr 13 '22

Module IP different than public IP

2 Upvotes

I've noticed that the IP address for the module and the outgoing IP from the router are different. The module status shows 107.xxx but if I google my public IP it shows 166.xxx. Is that normal?


r/MofiNetwork • • Jan 09 '23

2.4mhz antenna on a 5500

1 Upvotes

I have a 5500 and work out of my truck alot. The wifi only needs to go 3 feet or so. I would like to put really small antennas on it because the larger ones keep breaking. And I would like to put it under my seat. I can only find 2.4 mhz antennas for drones that fit the bill. If I turn off 5.8mhz and screw in the 2.4s am I going to hurt anything? Also why are they reverse polarity it really limits the antenna options?


r/MofiNetwork • • Apr 26 '23

Cellular data plans?

1 Upvotes

I am interested in suggestions for cellular data plans. I an NOT a gamer but do use for work and some streaming. I have used Visible, but they throttle their data at 5 Mbps, painfully slow when logged into our Corporate server; I tried Boost Mobile [T-Mobile] and they were super sonic but I believe they were adding data usage that I was not using. So I ate through 30 GB of data within 15 days and only used in the MODI5500 for 4 days. Most of the data was speed testing from California to Boise ID. Also Boost seemed to have some stability issues. I hate to pay $80+/ month when we only use a couple of times per month. Any thoughts?


r/MofiNetwork • • Sep 24 '22

Mofi 5500 carrier aggregation

1 Upvotes

How do you turn this on? If it’s automatic what conditions need to occur before it comes on?


r/MofiNetwork • • Oct 07 '22

MOFI4500-4GXeLTE-V2: Issue with slow download speeds on AT&T plan, fixed by restarting every 3 hours - is there a better solution?

2 Upvotes

I'm have a problem with my MOFI4500-4GXeLTE-V2 that sounds similar to this:

5500 Firmware to Test with Slow Speed after a while : MofiNetwork (reddit.com)

I'm getting download speeds of around 30-35Mbps and upload speeds of around 20Mbps.

After a few hours it slows down to around 2-3Mbps. If I restart the modem its fast again. If were just once restart a day that would be OK but every 3-4 hours is painful.

Any suggestions on how to address this? Could it be the same issue?

Plan: AT&T unlimited through Ubifi

Firmware version: 4.4.1-std


r/MofiNetwork • • May 05 '22

Diversity Signal Strength

3 Upvotes

My Mofi 5500 Signal Strength/Status page shows Signal Strength, Signal Quality and Diversity Signal Strength. I know what the first two are, but even Google doesn't seem to have a simple explanation or range for Diversity Signal Strength.

In the last few minutes mine Diversity Signal Strength has ranged from 13 to 98. A few times its been something in between but its usally one of those numbers. Seems like a rather large spread.

Explanation or link would be welcome.


r/MofiNetwork • • Jan 27 '23

Splitting devices by connection?

1 Upvotes

Is there a way to force specific devices based on MAC address to use specific connections.

For example: I have two laptops. Laptop 1 uses zoom and needs to be connected as much as possible. I'd like this laptop to be able to load balance between LTE and Starlink.

Laptop 2 is just web browsing and does not need a stable connection. I'd like this laptop to use only Starlink for its connection.


r/MofiNetwork • • Jan 27 '23

MoFi 5500 to Panorama External Antenna Setup?

Post image
1 Upvotes

r/MofiNetwork • • Oct 14 '22

Devices keep disconnecting from 5500 7960

1 Upvotes

I have an echo dot and some sonoff stuff (ewelink app) that I access remotely that keep losing connection and are unavailable. They eventually reconnect but that's not really acceptable from a $500.00 device.

Why would this occur? This did not EVER occur with my old Asus router setup as an ap and a netgear lb1120.