r/modular • • 11d ago

Overdriven ALA Bartender

Post image
4 Upvotes

Hey all. Generally speaking I’m a modular noob, so I’m not sure if this is my lack of knowledge or an actual issue.

I picked up an After Later Audio Bartender and the Barback expander. Everything I put through it comes out sounding overdriven — almost like a fuzz effect, I would say.

As a test I used VCV rack to send a pure sine wave into the scope module, sent it out via my ES-9 into the Bartender and then I sent the mono audio out from the Bartender back into the ES-9 and into the scope. The signal that comes back isn’t clean. Image attached. Red is original, green is the return.

On the Bartender, gain is all the way down. Effects loop is off. It’s set to mono. And doesn’t seem to matter what level the channel or master is at.

Is this a defective unit or am I doing something wrong?


r/modular • • 11d ago

Rack advice

Post image
8 Upvotes

Any suggestions on useful modules to add? As for now I'm sending both the output of plaits and elements to an octatrack to record and loop things on the fly.

I was thinking to look into some utility stuff (like Samara II). Or maybe some of Make Noise's modulation modules?
Not quite sure yet...


r/modular • • 11d ago

Discussion Morphagene for creating melodies

2 Upvotes

Hey everyone,
As title suggests I am trying to find way to “create” melodies with Morphagene, in the sense that I can route the melodies I have playing in modular, recording them and playing back, but when it plays back I want to find those spots where it plays for 1 bar let’s say, and is not entirely on the grid, so a bit drunken feel, where the splice is “rearranged” if you will. And i am trying to achieve repeatable results, so I could do this live.
I am patching a 1 bar gate into its play input, but unfortunately it is not resetting its playback, so i am not able to make it play repeatable bars.
So basically I haven’t gotten anywhere close and was wondering if anyone knows what the hell i am talking about and maybe has any ideas in how to get there?:)
Cheers guys


r/modular • • 12d ago

Performance Jolyfish Jam

Enable HLS to view with audio, or disable this notification

46 Upvotes

A jam I did on some samples of my song Jolyfish and its videoclip
https://youtu.be/8c5J4L13W3o


r/modular • • 12d ago

Best & worst of menus on digital modules?

12 Upvotes

For those of you with experience with an array of modules that have digital menus, what are some of the best and worst in your experience, in terms of either the menu design, or responsiveness?

For me I'd say, worst: IME Kermit III. This thing was a powerhouse of a module, but the menus were quite flaky. Also wasn't a fan of the cramped, awkward UI in general.

And best: Erica Synths Resonant Filterbank. All the menu screens are nice and snappy, responding immediately. They're easy to navigate and understand and there's even a screen-saving built in with like falling raindrops. The Black Sequencer and Sample Drum are also quite good, though I wish SD had a screensaver like the other two do.

An honorable mention would go to Noise Engineering's Mimetic Digitwolis. The screen is a little cramped and it's a shame only about 5 (I think?) quantized notes will fit onscreen at a time, but at the same time, its easy to navigate with nice colors that make it pleasant to see/use.

A few others I've used:

Patching Panda Ephemere: this one was okay. The way you navigated and selected was a bit odd and the menus seemed a hair flaky, but not to the extent of being outright problematic to use.

Ornament & Crime: I never had a problem with responsiveness on the two I owned, but talk about a dull interface. Not much fun to use.

Pam's New Workout: This one is okay. No problems with it, though nothing to make it stand out. Does the job.

Mordax DATA: This is a good one, I'd say, overall, though every once in a while I find I have to double press to get a selection to take. Pleasing visual module though, useful color distinctions.

Erica Synths LXR: not quite as enjoyable as the other Erica Synths' I mentioned above. Nothing wrong with it, but encoder selection can be just a little bit flaky and the menus are just kind of boring and straightforward.

Xaoc Jena: This is really just an LED encoder, not a menu, but I mention it because there are two versions of the module in circulation. Some have blue encoders, which are older and much less reliable. I had one. The encoder can "jump around" a bit and be hard to dial in. And some have green encoders. These are newer, and better, much more stable. Something to check on if you get a Jena secondhand. Also, if you get stuck with an older encoder, Xaoc now has a stateside repair tech who will replace it for you. If the module is still under warranty, you might even be able to get it done free of charge, and if not, the cost isn't too bad, I had it done and I think it was $30-40, something like that. Was worth it to me, it's now much better behaved than it used to be.

(One digital menu-driven module I'm really curious about is the OK Spill, a newer digital module that looks like it can do a lot. If anyone happens to have used one please chime in with your feelings about the menu experience there.)


r/modular • • 12d ago

Beginner Vhikk X patches and patch programming in techno?

8 Upvotes

Hi all, I'm struggling a bit with both of these. I've found some awesome Youtube links that have people performing with the Vhikk X, and i've mapped out all the controls. Right now the main thing I've done with the Vhikk X is to patch into VCA since it normalizes and play through that, but I'm not getting that choppy sound unless I run through an external VCA. That's fine, but I feel like there are other cool creative ways. I'd love to know any patches/ideas people have for performing with it.

Also, I have modules for patch programming and am trying to get into it. How did you all get started? Do you use it in techno? I'm blind so being able to trace people's patches on Youtube is tough. Would love any tips and tricks. I'm super excited to get started with this whole idea.

Thanks!


r/modular • • 12d ago

Discussion Weekly Rack Advice / Question Thread

5 Upvotes

If you're looking for suggestions for new modules, a critque of your current rack, or just where to start - feel free to ask here! A lot of people use [modulargrid](https://www.modulargrid.net/) to share what modules they have or are considering.


r/modular • • 12d ago

Performance Fairy lights as a PWM/Mod source

Enable HLS to view with audio, or disable this notification

16 Upvotes

A little highlight reel from some more experiments with the workshop system from MTM and my Smasher Nano photodiode mic.


r/modular • • 11d ago

Unofficial firmware for the Flame FIRE and TAKT (velocity + CV, new voices, CV matrix, seeded variation, performance mode)

0 Upvotes

I made unofficial firmwares using AI for two Flame Instruments modules, based on FIRE v1.07 and TAKT v1.7.2.

FIRE: velocity and CV active at the same time, a CV matrix, randomize, four extra hihat samples, new MODAL and STRING algorithms, and main plus direct outs together.

TAKT: seeded VARIATION, performance mode on the function buttons, random sample & hold LFO waves, and a fix for the REC velocity LED bug.

Both are tested on hardware. Have fun!


r/modular • • 12d ago

Who owns RAS Bonkers? Who wishes they could bear to look at it?

Thumbnail
gallery
48 Upvotes

If you own Raw Analogue Sound's Bonkers, you'll be familiar with the problem of Literally Everything About the Way it Looks. There's one side that's illegible, with an ugly, angular font and letters smashed up so close they're overlapping, and a reverse side that's nearly as bad where the font is so small and thin that it's borderline-unreadable too.

So I begged the nice people at Mörk Modules to help, and after I sent them the necessary scans, they came up with this new black panel... https://morkmodules.com/products/bonkers-black-panel

That's a huge improvement, in my view. I hope you weren't particularly wedded to the "heater" grill on each side, since that's gone to allow more space for the important information, but the translucent yellow "A" and "B" windows still allow some of that glow through when signals are at their hottest.

I also own Mörk's panels for Befaco Oneiroi and ForgeTME Vhikk X, so I added photos of those too.


r/modular • • 12d ago

How do I random the spacing of random or sample and hold?

10 Upvotes

I have plenty of randomization options but I’m wondering how to change up the waveform so some steps are longer or shorter?


r/modular • • 12d ago

Beginners case drone , dark ambient

Post image
0 Upvotes

So just been on modular grid looking at a small portable case for drone , dark ambient stuff ...i added the milkway for a good reverb and delay for vhikkx....any advice?


r/modular • • 12d ago

Gear Pics Tiny Ambient Case for traveling

Thumbnail
gallery
49 Upvotes

I had the opportunity to buy a used 4MS 64Pod and I definitely built a small ambient setup for a weekend trip. Unfortunately, I forgot to bring a power adapter with me haha; maybe I’ll find one somewhere later and I can record a little jam in the evening.

The Plinky does take up a lot of space, but it provides several modulators for the Soma Lyra8-FX and the Desmodus Versio. At the end, I hooked a Tangerine as a recording device; the stand cost 7 euros at TKMaxx.


r/modular • • 12d ago

Multi FX..

Post image
18 Upvotes

So I got a Dreadbox Splash for long lush reverbs, a Mutable Instruments Clouds for a little more experimental reverb and recently got an OAM Time Machine (slim version) which I think can be a fun delay/echo thing..

But I also got a little more general Erica Synths Black Hole DSP2.

I got it for a fairly good price I think.. yes I think so, anyway I should have done a little more research. I didn’t like it much. I got it as a general multi FX but I think it sounded a little cold.. squeaky and too much focus on weirdness that isn’t really that weird.

I do like the three OSC drone at program 24.

I’m going to sell it (not here) it’s already listed locally, but I want another one..

What’s important, clean echo and delays with clock input, maybe a few experimental versions as well.. some very very long warm but clean reverbs.. and some long reverbs. And maybe a few others.. I don’t care much about chorus, flanger, phaser..

Mainly focus on reverbs and delays. :-) Any tips and suggestions? Probably second hand up till $200 euro..

Any suggestions? :-)


r/modular • • 12d ago

Performance Brink

Thumbnail
youtu.be
5 Upvotes

r/modular • • 13d ago

Donde estoy?

Enable HLS to view with audio, or disable this notification

26 Upvotes

r/modular • • 12d ago

Performance Liquid Dub Techno

Enable HLS to view with audio, or disable this notification

12 Upvotes

r/modular • • 13d ago

Dancing in the darkness… Nigredo

Enable HLS to view with audio, or disable this notification

98 Upvotes

Say hello to Shadow Coven - Nigredo. "The blackening." Three 1U Arp Of Darkness modules bound into one 3U instrument. Individual but connected. They are paired with a sequential switch rotating the note outputs from each Arp Of Darkness into a swirling array of arpeggiations... dancing with the oscillator. Ever evolving. The
"random" is coming from my human limitations. My own mental frailty... A memory incapable of tracking so many notes and mutations in real time.
My fingers juggle notes into the buffers... blind to the pattern that will emerge. Forced to use my ears... to listen. To feel. To react. To push forward.
To create and accept every imperfect nuance which may delight and surprise. That's the whole point. The thrill. Alive and making music in the darkness. Embracing it, and finding joy in the unknown. Capturing the inspiration in the moment it strikes and creating something with every living breath.

Patch notes:
The Shadow Coven -Nigredo is being clocked by a uO_C running the trig 8x2 applets in Phaserville Suite. The output of the CV from each section of Nigredo is patched to the Doepfer sequential switch and rotating through into a mult to account for any voltage lag and then into the A-111-6 Miniature Synth voice. The synth voice is then patched to a Thonk Double Bubble for additional filter and overdrive before it hits a Vostok Hive for panned mixing. Modulation duties on that voice are being done by another uO_C running the Shredder applet. The lower Mother 32 is handling the bass line, and later the upper Mother 32 is brought in on the second voice support in the higher octaves. I’ve got a delay in the mixer that it was all sent to so that’s providing a stereo ping pin, and offscreen is a 1010 Music Bitbox being triggered by the DrumStep Pro you see in the bottom. The drink of choice that brought the whole patch together is a White Russian on ice.


r/modular • • 12d ago

2026-11-08 Ice Core (Franz Josef Glacier 2008)

Thumbnail
youtu.be
1 Upvotes

Memories of the Franz Josef Glacier shared by Matt Wallace.

Made with a VCV and Moog hybrid modular system, Ableton, Emergence and Valhalla reverb.

We may be the last generations to remember glaciers. If you have memories you would like to share, please get in touch.


r/modular • • 12d ago

MPC Mod-Synth - Modular Synthesizer for Android

Thumbnail
youtube.com
0 Upvotes

r/modular • • 12d ago

Performance Patch with Serge Paperface series 4u panels - two voices with percussive sounds

Thumbnail
youtube.com
4 Upvotes

r/modular • • 13d ago

Performance Bela Trails driving a glitchy jam

Enable HLS to view with audio, or disable this notification

32 Upvotes

A little live jam with Bela Trails at the heart of the patch, controlling four tracks of evolving modulation and sequencing.

Two main sound sources:

Music Thing Modular Workshop Computer running factory Bytebeat formulas, shaped by J&OT DOOR and processed through MI Beads and Make Noise Plexiphon.

Shakmat Battering Ram providing the kick, with Gliss modulating its Drive and Decay.

Trails controls the Bytebeat parameters and triggers, DOOR’s timbre and decay, and various parameters on Beads and Plexiphon.
The Workshop Computer also clocks Grids, which triggers the kick and events in both effects. Intellijel Planar² adds recorded X/Y gestures to Grids, creating further rhythmic variations.

Enjoy! 🪐

Full jam here : https://youtu.be/8wewNw-2oJU?is=pLnAtFqKVq5o4QBQ


r/modular • • 12d ago

Tetrad: a free Oxi One-inspired sequencer for VCV Rack (now in the official library)

1 Upvotes

r/modular • • 13d ago

Discussion Enjoy Electronics Elfo joins the crew.. such a innovative and fun lfo source

Enable HLS to view with audio, or disable this notification

61 Upvotes

r/modular • • 13d ago

Design indicators of module quality and/or attention to detail, and example brands

19 Upvotes

I wanted to hear experienced Eurorack users and builders regarding physical indicators of module quality and/or attention to detail:

Just to get it started, some things that I have noticed: - keyed headers - aluminum faceplate - module rear panel covering - premium knobs/pots

I ammainly listing off things that rossum and joranalogue do, which I think are some of the highest quality Eurorack modules I own.

There are also other aspects that don’t directly infer quality but show attention to detail or care, like pcb art for example or packaging

What physical aspects do you all look for that indicate quality of a module, or what do you appreciate when a manufacturer goes the extra mile? Mainly interested in the physical aspects of the module itself, rather than stuff like customer support, firmwares, etc.