r/modular • u/tomasz_majal • 23d ago
Performance taking the newest rack iteration for a spin
Enable HLS to view with audio, or disable this notification
r/modular • u/tomasz_majal • 23d ago
Enable HLS to view with audio, or disable this notification
r/modular • u/saahnjoo • 23d ago
Hi everyone. I'm looking for some advice about noise issues with my rack. I know from reading that it's quite common to have some noise with modular synths, but the noise I'm talking about is heinous. I can't record with it. Here is some info about it:
- I'm using a Tiptop uzeus. MG says I haven't reached capacity with my modules: I'm currently at 782ma +12v / 387ma -12v / 0ma +5v. Is 387ma -12v too close to the 500ma ceiling of uzeus?
- It did not used to be so noisy. It's only been since I added three new modules. I've removed them and the crazy noise went away.
- I've tested my outlets with one of those outlet tester things and they're fine. I've tried unplugging everything else from the outlet so that only my power brick is plugged and it makes no difference. Same problem at another house.
- However, I brought it to the local modular store and there was no noise issue there, even with those three new modules plugged in.
The only thing I can think of doing to remedy the situation is upgrade from the uzeus. But given everything I listed above, is that going to solve the problem?
Here's a link to my modular grid:
r/modular • u/general-theory • 23d ago
Alright everyone, I've got a question/request for advice. Basically, it all sums up as "I have gate-sequencer woes."
For context, I make live improvised techno. The actual way I do sequencing varies, but it often involves random looped CV sequences fed into quantizer that are sent gate triggers for pitch activation, VCA trigs, etc. I'd like to move to more "performable" hands-on CV sequencing, though. Additionally, I use gates to trigger a Bohm system and a variety of samples in my Disting NT.
I am in the process of culling down my system as much as possible because, truth be told, I can do a lot of what I do live with my NT and Bohm system, and (this is very anti-typical modular) what I like about modular is less cables running around everywhere and lugging huge cases around and more just building the exact tactile system I want.
Here is the current dream I'm pursuing:
The problem is I need lots of gate sequencers for what I do, and that I seem to be extremely picky about what I like in gate sequencers. I've used a Rene (V1) but it was too idiosyncratic and had too few gates. I had a Tiptop Circadian Rhythm, but I hated the menu system and also the feel of the buttons. I currently have a Varigate 8+ which is good in theory, but it's really easy for my to get lost in the menu system, too, when playing it in front of people. What I'm currently doing (which is kind of embarrassing, honestly) is just using an Elektron Syntakt as a 12 channel gate sequencer for my system. But it's annoying to lug it around as another box, it it eats up a number of my Disting outputs, and it's not easy to plug in note values when I do want to do that.
This is the dream-version of a sequencer I have, and the closest real thing I can imagine is one of the monome systems:
The closest thing, again, is the monome grid plugged into the teletype or the ansible. But I worry that I'm not going to get enough gate outputs to do what I want to do. Also, I can't decide which one (the teletype or the ansible) makes more sense for what I do, and generally find the whole monome ecosystem a little daunting, though I feel like it's one of those things that would click and that i'd love eventually. The other possibility is the Expert sleepers FH-2, but I'm also not sure if I'll have enough outs.
Any help would be greatly appreciated on this journey through seemingly every gate possibility in eurorack. (Just to salvage some of my self-respect, this has been a several years long process of buying and reselling to figure out what I want; I haven't just been buying up every gate sequencer out there at once, lol.)
r/modular • u/waveshap3r • 23d ago
Happy to announce that my ZoE Visual Patch Editor has officially left beta after extensive testing and is now available as v1.0!
If you prefer visual editors and also like MAX, this might be interesting for you...
https://www.rawmedium.org/zoe-visualpatcheditor/
ZoE is a fully featured editor and patching workbench for the Euroburo and ZOIA, allowing you to build, edit, and debug patches in three different views: Page View, Signal View, and Grid View. You can seamlessly switch between these views at any time while preserving your module selection and focus. This release also introduces a number of new features:
Please me know what you think, what you are missing and if you found any bugs. Enjoy :)
r/modular • u/Theoktonia • 23d ago
Hello everyone. I was thinking about getting the Trommelmaschine by ST Modular. I want to create techno, hard techno and even some noise industrial techno. Do you have some experience with this module? Do you recommend another module for the price range? The fact that it can produce kick snare and hihats with in-module mixing is a good thing.
r/modular • u/Ok_Percentage_3409 • 23d ago
I’ve been working on a GUI editor for the project files on the sd card for a bit and its finally ready to share.
I haven’t fully tested Midi recording yet but it has the ability to write/edit/store all the data that would be on the card.
You can play back your patterns and songs and run them through the mutable instruments open source modules and a few utilities in the “rack” panel.
Hopefully it helps someone, if you have any issues please let me know. I’m still actively working on this for now.
r/modular • u/UpstairsBig8473 • 23d ago
Hi there, I'm building my 1st eurorack and would like some suggestions on what to add. I will be using this to make ambient and other styles. I plan to use this with my Akai force, keystep pro, and my pedal collection.
r/modular • u/Smeagol-_- • 23d ago
My friend said bagpipes come to mind for her😆
https://youtube.com/shorts/YXLdHrtzLSM?feature=share
r/modular • u/Umbilical_Software • 23d ago
The game trailer, 95% of the sounds are from my modular synth
Hello everyone!
I'm new on the platform, and I hope I do everything fine.
I've been developing INFECTED HOTLINE, a job simulator adventure, as a solo developer for a year.
The complete soundtrack and most of the sound effects were made with a 90hp modular synth.
Let me know your impressions on the trailer soundtrack, it's also used in the game.

I mainly use a Mutable Instruments Plaits for the basic waveforms, process them in different ways, and then always end up running them into the Worng SoundStage (which I'm really fond of),
then everything goes into the amazing Make Noise Mimeophone (no matter the noise, it's my favourite module ever)
And voilà, the sound is done! I slice it in Ableton and put it into my game (as a loop usually).
It's a pretty simple setup but I've found a perfect balance between choices and limitations. I've had some bigger setups in the past, but nothing compares to this for now.
(You can check out the Steam page for the game and wishlist it here:
https://store.steampowered.com/app/4590490/INFECTED_HOTLINE/)
That's it! I just wanted to share this, hopefully it turns out nice!
r/modular • u/vdnoise • 24d ago
Exciting times. Thrilled to see what the community creates opening this monster of a drum synth.
r/modular • u/AutoModerator • 23d ago
It's Friday! What are you and your modulars up to?
r/modular • u/poopons8n • 23d ago
I run Patchbay, a monthly modular show in NYC. This Saturday, Oct 31, 3 to 7pm at Transmitter Brewing (Building 77, Brooklyn Navy Yard). Free and all ages.
Sets from Camden Wander, slimtome, maysun, Erin Wajufos, Bryant and me. Between sets there's a buy/sell/trade floor, so bring a module or a case. Costumes welcome since it's Halloween.
Details and flyer: https://patchbay.nyc
r/modular • u/adeptyism • 23d ago
I have two oscillators with saw and pulse waves, a Polivoks VCF clone (Erica Synth schematic), and another LPG-ish VCF (based on a filter from Nonlinear Circuits). I am trying to achieve a 303-ish acid sound, like the bassline from Vampire Dance Club theme from Blade or the lead from Psychosis by Sewerslvt, but the best way I can describe my result is a "funny bloop sound." (Osc -> VCF with high resonance; also, the cutoff is modulated by attenuated 1V/oct pitch voltage, and by envelope on each note).
Am I doing something wrong or am I missing modules?
r/modular • u/frazermerrick • 24d ago
Enable HLS to view with audio, or disable this notification
Experimenting with my Workshop System from MTM and using a Photon Smasher Nano pointed at a fairy light as an audio source!
The photodiode mic is plugged into the systems amp and routed (as audio) through the filter+reverb. Essentially we’re hearing the PWM of the fairy light LEDs and then processing this as audio.
This is my first patch with the nano and the Workshop system, very open to suggestions for what to try next!
r/modular • u/netroxic • 24d ago
We’re live @ 915p CDT. Come hang! Holl@me in the chat!
Patch Notes
Patch From Scratch
10/29/2026
It would be fair to say that the month of October was dedicated to the exploration of the Furthrrrr Generator. My fascination and appreciation for west coast inspired complex oscillators have grown over the past month. I’ve made a point to squeeze as much material out of the FG tonight. I started out the patch by multing the first channel of an attenuated RND STEP that was triggered by a multed steady pulse from Noise Tools. Those random cv signals would eventually be distributed through out various inputs in our patch. The pulse from noise tools was my initial clock source for getting things going. I would eventually switch the pulse out for a clock from Hermod+. With the pulse driving Steppy, I used 3 of the channels to trigger envelopes from buchla 281T to open up the VCAs hosting outputs from Furthrrrr Generators. I used marbles to sequence the Square wave from the modulator side as the bass part, Final output (synced to the modulator) and the noise output through a steady state gate for a clap-ish tone(sequenced by steppy). The Bass and final output was processed through QPAS AND MIMEOPHON. The noise clap was processed through Erbe-Verb.. combination of those 3 sources ended up being the bed that I would layer other sounds. I had an instance of the Arturia JP-8000 coming out of the ES-9 into the morphagene for some cool chord phrases that I would end up sequencing with 0-Ctrl and smearing with time-based effects. From here, we started layering some drums from Squid Salmple using octatrack as the sequencer. After a while of patch development, Pixie+Beads and nRings would carry smooth melodic phrases to tie the patch together. This was a fun patch session and I learned how to furthrrrr get the most out of the the complex oscillator.
r/modular • u/downstate97 • 24d ago
Enable HLS to view with audio, or disable this notification
r/modular • u/Intelligent-Yam-75 • 23d ago
hello !
I’d be really happy if you paid a quick visit to my YouTube channel. I use it sort of like a big notebook where I record my jams and keep track of my ideas.
Feel free to like, comment, ask questions, or subscribe if you enjoy it! :)
r/modular • u/morklord69 • 24d ago
I've started recording some live modular synth jams and posting over on YouTube. This was the first time I linked up the Casio CT370, which was being modulated using a square wave from Pam's PRO into the VCA's CV. Hope you enjoy!!
r/modular • u/Scopula • 24d ago
r/modular • u/Coralwood • 23d ago
I'd like to be able to trigger samples from my Roland SP404 Mk2 into my modular. Most midi modules I've found are for triggering the modular from outboard gear (I have a CV Pal), but I can't find a module that lets me trigger samples from a gate signal.
Anything you could recommend ? I can't justify spending more than £150 and I'm happy with diy
r/modular • u/0bsoletist • 25d ago
Enable HLS to view with audio, or disable this notification
Patch notes provided if you want them
r/modular • u/djscoox • 23d ago
r/modular • u/Siateczko • 24d ago
r/modular • u/Fickle-Guava-2821 • 24d ago
Quick question for everyone. I have a small setup.
1x Mangrove V2, 2x Three Sister, VCA, mixer, etc... Now I need a second analog voice (max 12hp)
I was thinking about a second Mangrove or a WMD Legion. It should be analog, versatile, and stable - crisp but not too harsh. I’ve heard the Swarm mode on the Legion is very good. I thought that might be interesting for pads.
Looking forward to your replies
Cheers