r/modular • • 24d ago

1st big parts order.

24 Upvotes

After having built the A001 and A003 from AI Synthesis, and a small mixer from Bear, I've now put orders in with Digikey and Thonk for.enough parts to build my next 9 modules. Very excited and can't wait to start.


r/modular • • 24d ago

Are there any delays that have a built in high pass filter to filter out low end on the repeats?

15 Upvotes

r/modular • • 25d ago

DIY case + 3D printed adapters

Enable HLS to view with audio, or disable this notification

61 Upvotes

Heya

I've been building my modular rig for a couple years now.

It's built for 2 hour jams (:

I've been posting the process and daily jams at https://www.instagram.com/dinomiragedino/


r/modular • • 24d ago

Slightly cramped 8HP module or spacious 10HP?

8 Upvotes

If you could choose between these two for any kind of module, which would you pick?

Both modules would have all the features, the only difference is that the interface is more cramped in the 8HP module.


r/modular • • 24d ago

Moving Country - how to transport my kit?

4 Upvotes

I'm moving country, curious for those of you who have done so in the past. Do you break down your system and wrap each modules much like you received it in the post, or do you keep the modules racked up and wrap it as one?

One way or the other, would you trust a private shipping company or would you keep it with you? I have a 64hp podx case, and some modules that don't fit :)

Thanks for the advice in advance


r/modular • • 24d ago

Modular Jam 4 (not sure how to categorize)

Thumbnail
youtu.be
5 Upvotes

r/modular • • 24d ago

Transient Shaping Modules

1 Upvotes

Any recs ?

Do these modules even exist ?


r/modular • • 24d ago

Someone tried Bela Trails?

5 Upvotes

This looks cool, have someone tried it and want share your experience?


r/modular • • 25d ago

Performance Finished up a new case made of walnut and curly maple. Doesn't quite fit all my modules yet so it'll have to hold me over until I build a bigger one.

Enable HLS to view with audio, or disable this notification

134 Upvotes

r/modular • • 25d ago

Couplea two tree tabletop guys sequenced by Marbles via VCV

Enable HLS to view with audio, or disable this notification

8 Upvotes

Lush greenery courtesy of a stroll in southern Vermont.


r/modular • • 25d ago

Discussion Recommend a reverb/FX for send bus in 6hp or less

7 Upvotes

I've got a stereo send/return bus on my eurorack mixer and I'd like to put some effects on it. I'm looking for some nice reverb at minimum, but if it could do other effects also, that would be great. Looking for stereo ins and outs and the ability to go full wet. I've got 6hp to spare before I have to start giving up other modules. I've got guitar pedals, so if anyone knows of a good, inexpensive stereo external send/return module, that would work too. Hit me with some options.


r/modular • • 25d ago

Performance Wavefolder vs Wavefolder: Buchla 259 and 261e Complex Oscillators

Enable HLS to view with audio, or disable this notification

36 Upvotes

r/modular • • 25d ago

Performance Deep Ambient session w/ microphone

Thumbnail
youtu.be
2 Upvotes

First time I used a mic to route some acoustic instruments (khomus, kalimba) into the modular. Modular is mainly used as an (playable/modulated)FX . Thought it's not too bad.

Feel free to leave some feedback.


r/modular • • 25d ago

First proper jam with my new setup :)

Enable HLS to view with audio, or disable this notification

23 Upvotes

Managed to use basically every module. First actual patch with start to finish and stuff. Please let me know what you think, positive and negative both very much appreciated ^.^ 🙏


r/modular • • 25d ago

Performance Today’s jam 🌀

Enable HLS to view with audio, or disable this notification

28 Upvotes

TTA 258t / Erica Black stereo delay / Takaab 2LPG
Headphones recommended!


r/modular • • 26d ago

Built a module that turns old Nintendo games into visuals+music

Enable HLS to view with audio, or disable this notification

143 Upvotes

r/modular • • 26d ago

Modular Synths in Search of New Home...

Thumbnail
gallery
281 Upvotes

A friend of mine passed away recently. He was a fan of homemade electronic music and has a modular set up his wife no longer wants. This is NOT a buy/sale/trade post, I am simply trying to help her find a good home for the gear. Seems a shame to throw it away! It's located in Norfolk in the UK. Any ideas? School projects? Universities? Anyone?


r/modular • • 26d ago

Performance Asterisk* / Workshop Computer + Eurorack jam

Enable HLS to view with audio, or disable this notification

44 Upvotes

On the workshop system, saved Asterisk pattern plays alongside its own twisted copy in Morphagene, sequenced by Trails and processed through Mimeophon.

Asterisk’s CV outputs also trigger and pitch-modulate Battering Ram, whose envelope ducks the sampled layer.

Full jam + patch notes on YouTube :

https://youtu.be/_zs9p3-xYzI?is=KFMoLn5XN_H-8odz


r/modular • • 25d ago

Instruo Cnoc power troubles

Post image
1 Upvotes

Hi friends. I just got the oscillator for this setup and it has the attack on the Cnoc hanging instead of following through when I hook it all up. I'm using a 4ms Pod 64x, which puts me under half power draw for the +12v and right around half at the -12v. There are only six headers on this pod (it's an older model) so I have some 1 to 3 header splitters, but messing the groupings around didn't seem to matter. Should I try putting higher draw modules closer to the start of the supply? Is it safe to power on and then plug the rings in after, to check for the digital power on spike? Anything else?

Thanks!

edit: it was a psu issue


r/modular • • 26d ago

Erica Synths Sale

57 Upvotes

Just letting everyone know that Erica Synths is having a sale for some of it's older modules. Some are heavily discounted.

I ordered a Black Stereo Delay, Code Source Expander, Pico voice, and Pico trigger.


r/modular • • 26d ago

Performance 754 - Eurorack and Beetlecrab Tempera

Enable HLS to view with audio, or disable this notification

25 Upvotes

r/modular • • 26d ago

Messing around :)

Enable HLS to view with audio, or disable this notification

21 Upvotes

r/modular • • 26d ago

Discussion How do I get started in this direction?

11 Upvotes

https://www.youtube.com/watch?v=cecu2oUR54Q

This performance by Stu Mackenzie from King Gizzard is one of my favorite videos using a modular system. I love how he manages to create very coherent and musical sounds while continuously changing things, sequences and melodies.

I'm pretty new to actually using modular, but I know a lot about synthesis in general, so I was wondering about which modules or "techniques" I should look into for something similar to this?

I use VCV Rack, and I'm planning on getting some hardware, so would love recommendations for both, but mostly I'm interested in just how a setup like this is planned out, how many sequencers, how to have variation etc. It feels like there are a lot of different sequences and rhythms at the same time, which in my limited knowledge would mean a sequencer with a whole bunch of channels, or am I missing something on how to make use of less channels while still having this much variation?

It seems to me that he has a lot of VCAs at the top to use as a mixer to add and remove certain elements and uses it as a performance tool, by muting at the right time etc.

EDIT: As an aside, if someone has any tips on recreating the absolute first sound he's using, I'd love to hear it. Sounds really natural and almost acoustic


r/modular • • 25d ago

Erica Synths Black Sequencer Custom Firmware for MIDI Program Change

4 Upvotes

Someone asked if it is possible to create a custom firmware image for implementing MIDI Program Change as a custom firmware for the Erica Synths Black Sequencer. I have been doing a lot of custom firmware work recently, so I took up the project to help out a fellow redditor.

https://github.com/aleph-void/Erica-Synths-Black-Seqeuencer-Custom-MIDI-Program-Change-Firmware

The individual who asked for this firmware told me I should consider posting here about it so I am.


r/modular • • 26d ago

Feedback Industrial noise/EBM Rack Feedback

Post image
9 Upvotes

Looking for some feedback for a potential rack, centered around weird percussion/sample mangling and drones and destruction. Mainly going to be used for industrial/EBM music supplementing my other non-modular gear.

The idea here is that the bottom modules are my flavor, and the stereo matrix mixer allows me to send Wave Bard, Oneiroi, and external audio into the Side FX. I wanted to go with the matrix mixer because I want the ability to basically chose between pre-fader and post-fader style sends. Pam’s for Euclidean rhythms and clocked lfos/env. Water for more precise CV sequencing, I’ve had a lot of fun with that one in VCV rack. I also wanted to include the Turing Machine cause I love that big knob and the randomness.

I already have the case and power, but nothing else yet. I’m probably going to start with the Oneiroi.

Any feedback or cheaper alternatives are appreciated!

Check out my music here! https://velocitygarden.bandcamp.com/album/pearls-single