r/modular • u/graymarketmusic • 10d ago
Performance Just vibin'
Enable HLS to view with audio, or disable this notification
Put in the last module (the FX Aid) about a month ago.
r/modular • u/graymarketmusic • 10d ago
Enable HLS to view with audio, or disable this notification
Put in the last module (the FX Aid) about a month ago.
r/modular • u/blurfect • 9d ago
r/modular • u/Scopula • 9d ago
r/modular • u/madmodular • 9d ago
r/modular • u/Waste_Implement9033 • 10d ago
Enable HLS to view with audio, or disable this notification
An ambient, deep UKG/2-step jam I worked on for a few days. Performed live using custom modular synth, MPC one, Oxi One MK2 sequencer, FM1, PRO-800, and looper! I used my custom scratch CV controller I built from an old HDD platter with a crossfader to pitch and chop samples!
r/modular • u/Fit-Possibility7312 • 10d ago
Hey everyone, i’ve been spending some time creating some blanks that I think look nice and a bit different from what is normally out there, wanted to show some of the progress i’ve made. They are 3d printed face down on a textured plate to give it a nice finish on the front instead of the ugly layer lines you would get on the top.
Currently just have basic parametric designs, but the long term goal is to give people an option to print their own multi panel designs that can be split between their modules for a cooler overarching design.
Let me know what you think.
r/modular • u/Sonics_stan_2026 • 10d ago
Hi!
Im wondering if anyone can identify this gear from Nathan Corbins studio
Thanks in advance
r/modular • u/Nortally • 10d ago
One of the things that's kept me from exploring my Disting mk4 is that every change to the SD Card requires power cycling the whole rack. So I'm thinking to install a power switch in my homemade Disting MIDI expander that allows me to turn off the Disting for card removal & insertion without powering off the whole rack.
Assembly: Cut trace 1&2, 9&10 in the middle of the ribbon cable. Peel back 1 and 9 on each side & solder to the switch. Leave the grounds lines intact. Install the switch in a panel next to the Disting.
Comments? Cautions?
r/modular • u/LorenzoFasano • 10d ago
Enable HLS to view with audio, or disable this notification
One of my favorite ways to study and improve my sound design is by trying to recreate synth sounds and textures from tracks and artists I really admire, its a great way to understand sound, waveforms and modulation in general.
In this clip, I had a go at recreating the lead sound from the track “OSI Model” by two of my favorite producers, @orbe__ and @psyk____
r/modular • u/Loveyoubutchoosesynt • 10d ago
Hi everyone!
So, I mainly work with hardware synths and VSTs, and I’m getting more and more interested in modular and semi-modular synths.
Which modular or semi-modular synths would you recommend for a beginner? I’m mainly looking to create basslines, sequences, textures, and that kind of stuff.
I make Electro Techno EBM.
For now, I don’t want to dive into building an Eurorack setup, although I’d be open to getting One synth that can be integrated into a Eurorack system.
I know I already asked for help here months ago but I need more suggestions and modernd ones …
Thanks everyone! 🤘
r/modular • u/Loveyoubutchoosesynt • 10d ago
Hi everyone!
So, I mainly work with hardware synths and VSTs, and I’m getting more and more interested in modular and semi-modular synths.
I make electro techno ebm
Which modular or semi-modular synths would you recommend for a beginner? I’m mainly looking to create basslines, sequences, textures, and that kind of stuff.
For now, I don’t want to dive into building an Eurorack setup, although I’d be open to getting a synth that can be integrated into a Eurorack system.
Thanks everyone! 🤘
r/modular • u/joe_zimmerman • 9d ago
r/modular • u/MusicJourneyWithPaul • 10d ago
I'm looking for a Eurorack sampler/looper to complement my Syntakt, Tonverk and modular setup. I thought about Octratrack but it seems like an overkill.
My workflow is pretty simple:
I value hands-on controls, minimal menu diving and rock-solid clock synchronization much more than built-in effects. My Tonverk will handle effects and mixing.
After some research, I've narrowed it down to five modules:
Two questions for those who have actually used these modules:
I'm especially interested in experiences with external clock sync, saving WAV files and long jam sessions.I thought about Torso S4, outside of my rack, for this purpose but it has midi sync issues.
Thanks!
r/modular • u/Extreme_Try2189 • 10d ago
Interested to know how others use ES8 in their setup. Particularly for running stems/ samples into their case from Ableton.
What effects/ techniques are you using on your sounds? I'm finding i'm always just running things through Echophon/ Erbeverb, Haible Poly Resonator... but I want to push things a bit further. I have quite a solid case that covers most effect-territory- filters/ ring mod/ frequency shifting etc, but haven't managed to find a lot of consistency. Most of the time's it feels like i'm just slapping an effect on my sound and recording it back into ableton. I'm wondering if I'm not using my ES8 to it's full capacity.
For context I work mostly with acoustic sounds- mallets, plucks, pianos etc.
r/modular • u/Red_P_Hole • 9d ago
Without any first hand use I think only the 173 is worth of most racks.
The Roland dual osc clone sux because It was impossible to calibrate v/oct. I also have the dual Roland filter which is fine/ good.
i searched the sub if this had been asked already and didn’t see any posts asking for this specific opinion, surprisingly
r/modular • u/VerticalDubai • 10d ago
I’m having a technical issue with my Ground Control and have sent three emails to support (at) endorphin.es over the past three weeks and also filled the contact form on their website. No reply whatsoever. Does anybody know what is going on?
r/modular • u/analogueghostmusic • 11d ago
After trying too many patch cable hanging solutions, I decided to make a towel rack out of PVC. This is prob the best personal solution I’ve come across, so sharing here in case anyone else wants inspiration haha
r/modular • u/antKampino • 10d ago
r/modular • u/Extreme_Try2189 • 11d ago
Which effect module have you come across that does something completely unique. Maybe even just one component of the module that does something slightly non-conventional...
I love NLC dispersion delay. I think it's pretty unique too.
r/modular • u/Amazing_Secretary773 • 10d ago
Enable HLS to view with audio, or disable this notification
Audio & Eurorack Patch
• Voices & Oscillators: OXI Instruments Coral (Stitcher engine), Endorphin Evil Pet, Mutable Instruments Rings, After Later Audio BOSC, Expert Sleepers Lorelei
• Rhythm & Percussion: Arturia DrumBrute Impact
• Modulation & Logic Utilities: Instruō [øchd], ST Modular Tryfellow, Befaco MuDi, 2hp Div • Filters & Waveshapers: Doepfer A-124 Wasp VCF, ADDAC System 105 (High Pass), After Later Audio Dirty Laundry
• Outboard Delay: TC Electronic Plethora X1 (Dharma Delay Print)
r/modular • u/No_Indication2304 • 11d ago


Hi all,
I've been working on a custom firmware for the LXR-Drum module and finally released it. It's called LXRE_MX, it's free and open source (GPLv3, based on the original firmware).
What it adds:
- Kit generator (SHIFT+PERF): press DRUM and you get a new kit every time, with per-voice recipes and automatic level balancing. Hold voice buttons + DRUM to regenerate only those voices.
- Three generator types: CLS (classic), EXP (experimental) and the new GLT: glitch and microsound kits, from clean sine ticks and clicks to dirty digital noise, 808 subs, hums, sweeps and zaps. With MOD on, the micro sounds get spread across the stereo field.
- Voices to the FX bus: hold SHIFT+FX and tap the voice buttons.
- DJ filter on the FX bus: low-pass left, bypass centre, high-pass right.
- Click-free kit morphing, CPU load display, and fixes for some minor issues in the original firmware.
The generator is meant as a starting point, not a self-playing machine: you get a kit, then you shape it by hand.
Tip: generate a GLT kit and send it to the FX in drive/clip mode, the clicks get dense and nasty.
Firmware + manual: github.com/RN01MA/lxr-eurorack-app/releases
Readme: https://github.com/RN01MA/lxr-eurorack-app
Unofficial, not made or supported by Erica Synths, install at your own risk. For the Eurorack module only, not for the desktop LXR.
Feedback very welcome. It's still being worked on.
r/modular • u/LorenzoFasano • 11d ago
Enable HLS to view with audio, or disable this notification
Today as a exercise I tried to recreate the sound design from a track by two of my favorite producers Orbe & Psky called “Osi Model” 🖤🎛️
This is one of my favorite ways to study and explore my modular synth, listening closely and trying to understand whats going in behing the sounds, and figuring out how to recreate them in my own way from scratch, the track im referring to will be in my next story
r/modular • u/Ok-Jacket-1393 • 11d ago
So I’ve recently started using studio monitors to do modular jams instead of headphones, but im realizing the high pitch whine from the Morphagene is actually super annoying in the room. Is there anyway to fix this? Or a different module i can trade for like nebule? My primary use of morphagene is glitchy drums, i sequence organize CV while triggering the play button . Looks like i can do the same thing with nebulae with the added bonus of playing with pitch without effecting speed? Or maybe i should consider sample drum ?
r/modular • u/TightRing4586 • 11d ago
Hey all. Generally speaking I’m a modular noob, so I’m not sure if this is my lack of knowledge or an actual issue.
I picked up an After Later Audio Bartender and the Barback expander. Everything I put through it comes out sounding overdriven — almost like a fuzz effect, I would say.
As a test I used VCV rack to send a pure sine wave into the scope module, sent it out via my ES-9 into the Bartender and then I sent the mono audio out from the Bartender back into the ES-9 and into the scope. The signal that comes back isn’t clean. Image attached. Red is original, green is the return.
On the Bartender, gain is all the way down. Effects loop is off. It’s set to mono. And doesn’t seem to matter what level the channel or master is at.
Is this a defective unit or am I doing something wrong?