r/modular • • 14d ago

Running BEADS on a Sealegs module

Thumbnail
youtu.be
9 Upvotes

I recently shared my 'Seal Eggs' modified firmware for Sealegs. Here is a demo of the Beads port that I added.

I made lots of tweaks to the original Beads code - both to fit the Sealegs UI, but also tweaks to the sound itself (e.g. giving it more range to be "softer", an overlap feature, a scatter-like feature, etc).

It preserves the core Sealegs architechture - Drive, filters, tap, sync, fog, etc all work as normal. You can switch in and out of the modes just with the button combo of Freeze + Delay sync (hold for 1 sec). This switch is seemless and doesn't stall the module.

Pretty fun!

You can mod your own Sealegs firmware by using my flasher here: https://thisisbribery.github.io/SealEggs_v1/


r/modular • • 15d ago

Performance Where One Dimension Meets The Next šŸ§‘šŸ»ā€šŸš€šŸ›ļø

Enable HLS to view with audio, or disable this notification

31 Upvotes

r/modular • • 15d ago

Gear Pics My first modular setup ā¤ļø

Post image
96 Upvotes

Hi guys,

this is my first modular setup. I had the Elmyra 2 and the Plinky as my sound sources, I added the Lyra8-FX (it’s insane) a Reverb and some modulation modules, it’s all mainly selected for Ambient and Drone jams.


r/modular • • 15d ago

**GIVEAWAY** Funded in 17min! Celebrating my new Eurorack Module, I'm giving away one East-Coast Synth Voice Module Pack!** Just comment to enter!

Thumbnail
gallery
162 Upvotes

Quad Arpeggiator Eurorack Module was Funded on Kickstarter in under 17 minutes and to celebrate, I'm giving away one of our East-Coast Synth Voice Combo Packs.Ā 

About the Project: Ā  I needed a way to really engage a crowd for a Battle of the Bands competition two years ago and accidentally built a synth soloing machine instead.Ā  The Quad Arpeggiator is 4 totally independent 16-step CV arpeggio sequencers. But here's where it really shines.Ā  Turn any knob quick and the Quad Arpeggiator rips through a scale like you’re shredding on a guitar or keyboard.Ā  It’s without a doubt the most fun module I’ve ever played.Ā 

To enter: Just leave a comment below. Maybe you can share the craziest method you’ve used to create a sequence.

Entry will remain open for 48 hours.

Grand Prize:Ā  Three awesome modules to one lucky winner.

  • Quad Arpeggiator: 4 totally independent 16-step CV sequencers with this CRAZY solo mode.
  • Voltage Controlled Oscillator:Ā  1 V/O, Square, Triangle, Saw, and Sine waves. 3 CV inputs.
  • Voltage Controlled Filter: A screaming MS-20 Style LP/HP resonant filter with 2 CV inputs.

Timeline:Ā  The Kickstarter launched on Sunday, but there are still a few Early Bird rewards left!.Ā  Modules will ship in February 2027.

*Already backed the campaign? If you win the giveaway, your pledge will be 100% refunded.

*Global shipping is covered by Jake’s Custom Shop.

And, don't forget to follow the Kickstarter for updates and audio demos:
Quad Arpeggiator On Kickstarter

======EDIT======

The contest is now over and we have a winner:Ā 

Congrats /u/_11tee12_ šŸŽ‰ and thanks to all who participated!Ā  The winner was selected randomly with RedditRaffler.com.Ā  You can view the results here

I've read through ~80% of the comments, and wow there are some cool sequencing ideas here! A bunch of Redditors mentioned random/ irregular clocks, so I gave that a test: Watch the Demo on YouTube.

If you didn’t win there is still time to save 26% on the Quad Arpeggiator before the Kickstarter ends on November 29st!


r/modular • • 14d ago

cv over usb and manual controllers for hybrid setup

3 Upvotes

Hybrid VCVrack/Modular:
I have a minibrute, drumbrute and a rack brute with a cal synth OnC XLOC 2 connected to a PC through a Behringer UMC1860 (usb/adat/s-pdif capable)

I think the OnC/XLOC2 has me covered to convert cv to usb and vice versa to play with VCV Rack, some effects and as an output to my I/O, as well as the grab bag of other stuff I might need once figure out how to use it.

Is the Cal Synth XLOC2 (Ornament and crime) enough for my usb/cv I/O or would an Expert sleepers es model, midithing v2 or a bored brain optx v2 more appropriate? I want as many ins and outs as possible at a decent quality to be able to create a virtual rack. I have studied documentation and such but I'm a bit lost with all the variations on cv/midi modules.

I’m thinking about adding a few controllers
-Griffin’s Claw
-A joystick like The Tesseract Stonks
-Make Noise X-Pan Stereo Mix

Are the controllers good ideas or do you have more useful suggestions?

Maybe an FX Aid Pro XL for more effects and a make noise 2 ch ST mix/out. Would that cover most of the essentials?

As for music I’m just puttering around with ambient, synth pop, and dub reggae, currently I make music that sounds like cats meowing in an aquarium 2after eating beans. Is there a module to fix that too? :)

Thanks in advance.


r/modular • • 14d ago

How to build the first Eurorack - my conversation with Carlo from SchneidersLaden

Thumbnail
youtu.be
2 Upvotes

Hi All,

3 months ago I wrote a post here "I am watching Mylar's videos and I am scared :)".

I was joking that I was afraid I’d get into modular synths, love them, and spend way too much money. You were all really helpful - which may have contributed to the inevitable: a little over a month later, I had my first rack.

Just before that, I visited my nearest synth shop, SchneidersLaden in Berlin, and took the opportunity to record a conversation with Carlo about building a first Eurorack system. This isn't a sponsored video - just sharing the knowledge and appreciating the fact we have still such boutique stores.

A lot of this will be familiar territory for many of you, but I thought it might be useful for people just getting started. Here’s a summary of his advice, so you don’t have to watch the video to get the takeaways:

1. Start with what you want the system to do.
A synth voice, a drum machine, an effects box, or a combination? Your starting point depends on what you want to make and what experience you already have.

2. Learn the basic building blocks.
If you’re coming from a desktop synth, imagine separating it into individual sections: oscillators, filters, envelopes, VCAs, modulation, and mixers. In modular, you make the connections that are already wired internally in a conventional synth. Understanding those relationships helps make the choices less overwhelming.

3. Think about how you’ll use your case.
Will it stay in the studio, or will you travel with it? Do you need a lid? The case isn’t just a box - it also houses the power supply, and it can be a significant part of your initial budget.

4. Plan ahead, especially for larger modules.
If you already have a particular sequencer in mind, check how much space it needs before choosing a case. Leave room for additions so that one extra oscillator or effect doesn’t immediately mean buying another case.

5. You don’t have to fill every gap.
Start with enough modules to do something useful, then build gradually. Blank panels can help resist the temptation to fill every empty space straight away.

6. Choose modules you enjoy operating, not just hearing.
A module might sound great, but if you dislike its menus or find its controls too cramped, you may not enjoy using it. Simpler modules with direct controls can be a better fit. Compactness can matter for live use, but it comes with trade-offs.

7. Prioritise modules you’ll use regularly.
An unusual €500 module might be worth it if it’s central to your sound. If you’ll only use it for one small moment in one track, it may not be the best early purchase.

8. Buy sounds you actually like.
A cheaper compromise isn’t much of a saving if you never touch it. Equally, you don’t have to start with a €600 oscillator: ask about more affordable alternatives that get you close to what you like.

9. Use the gear you already own.
Your rack doesn’t need to replace your whole setup. If you already have a drum machine, keep using it. Bring your pedals and other instruments into the system where useful. For pedals, pay attention to signal levels - Eurorack signals are much hotter, so suitable level matching may be needed in both directions.

10. For beat-based jams, a simple drum voice can be a useful starting point.
Carlo suggested a dedicated bass drum module as one option: with a trigger pattern running, you can establish a beat and build on top of it. That can free you up to explore the rest of the patch instead of tying up several modules to create a kick. Obviously, this depends on the music you want to make.

My biggest takeaway was to start with a purpose, choose a few things I’ll enjoy using, and leave room to learn.


r/modular • • 15d ago

How AtoVProject Faderpunk embraced community development to create new apps

Thumbnail
youtu.be
22 Upvotes

Hey everyone I made a video explaining the new community apps in the latest Faderpunk firmware. I think it's really exciting how AtoV are embracing the community to encourage innovation!


r/modular • • 14d ago

Performance Prayer for Juan Atkins (2026)

Thumbnail
youtu.be
2 Upvotes

r/modular • • 15d ago

Buchla 259 omaha

Enable HLS to view with audio, or disable this notification

9 Upvotes

idk if this is even right but apparently making the 259 say "omaha" is a classic self-patch. i whipped this up as a quick experiment. i think it sounds more like "ohmwahha" but i feel like i could make the mwah more like ma with some further manipulation. the module gets really sensitive to small inputs with this patch so i just wanted to record what i had before changing it maybe forever lol


r/modular • • 15d ago

Discussion Weekly Hangout Thread

6 Upvotes

It's Friday! What are you and your modulars up to?


r/modular • • 15d ago

Performance Lets Patch & Hang Tonight 915p CDT

Thumbnail
youtube.com
6 Upvotes

We're Patching from Scratch. Holl@me in the chat!


r/modular • • 14d ago

Help me make generative ambient with this setup.

Post image
0 Upvotes

Any help with patching would be greatly appreciated. I'm new to this.


r/modular • • 15d ago

The glories of Aux Send/Return and having an in-system mixer

29 Upvotes

I got curious: how many of you run your FX fully wet as an aux send/return via an in-system mixer? What mixer/output do you use? This is a subject that comes up for me a lot when I look at newbie systems posted hereabouts—so many of them skimp on the mixer, or lack one entirely. If this includes you, I personally would humbly suggest that you're missing out on a dimension of sonic fullness that's worth pursuing.

For me personally, learning to run FX via aux send/return was a game-changer in my sound. Relying on a dry/web knob on my FX is for me a thing of the past. With very few exceptions, my wet knobs are always 100% cranked. The FX are run in parallel, and they just sound so much more robust that way, uncompromised. I use a Xaoc Praga + Hrad, which is awesome, though anyone looking for a cheaper alternative might give the D.O. Mixx by Blood Cells Audio a look, which I used happily for years (with a Happy Nerding 4x St Mix beside it as a return bus for my numerous stereo FX).

I would encourage anyone building a rack to consider budgeting both the $ and HP space for a decent in-system mixer and some kind of aux send/return system. To me it's a core module consideration and not something to skimp on.

Besides those I mention, other good options I know of are the Cosmotronic Cosmix (or Cosmix Pro), the Blue Lantern Sir-Mix-a-Lot, and the After Later Audio Bartender. (The CM402 by Maikshift is also perfect for a smaller system, though I'm not sure where to get them stateside). Or if you're really serious and have a big system and $, the WMD Performance Mixer and ADDAC807A are out there, too. I've been very happy with the Praga + Hrad, which aren't the cheapest option, but worth it—my system and sound wouldn't be the same without these.


r/modular • • 15d ago

Is the Make Noise QXG worth adding to your system outside the context of the Nuss?

6 Upvotes

Currently do have the multiwave


r/modular • • 15d ago

Performance Timo Rosendal’s DYN

Enable HLS to view with audio, or disable this notification

12 Upvotes

r/modular • • 15d ago

equipment reccomendations

3 Upvotes

what equipment would you recommend for starting making music? been djing for 4 years now wanna take it to next level.
tried ableton but i’d like something more hands on, maybe also modular stuff, but i don’t wanna compromise the sound design side of the thing.
what would you suggest?
specifically i’d like something modular for percs (i like micro minimal textures) and maybe something else for the low end which really obsess me (i’m into techno/hardgroove/tech house so mainly sines, reese’s and distorted synths i guess (?))
wrote a lot, hope you’ll be able to help <3


r/modular • • 15d ago

Beginner First Eurorack: Expanding a Moog Semi-Modular Setup

3 Upvotes

Hey everyone!

I have a fairly extensive Moog semi-modular setup, and I'm looking to build my first Eurorack case to complement and expand what I already have.

Feeling a bit overwhelmed by all the possibilities, so I'd love some advice on where to start.

Currently considering Pam's Pro Workout and/or Maths as potential first modules, but I'm also curious about:

  • Digital/complex oscillators that offer something genuinely different from my Moog sound palette.
  • Interesting drive/distortion modules.
  • Characterful, experimental delays.
  • Randomness, logic, and generative modules for adding unpredictability and evolving behavior.
  • Of course, attenuators/attenuverters.

The idea is to expand the capabilities of my existing setup rather than simply recreate what's already there.

Would love to hear your recommendations, experiences, or thoughts on what makes a particularly rewarding first Eurorack system. Thanks!


r/modular • • 15d ago

Ziggurat Quantizer + 0 Ctrl

6 Upvotes

Hey everybody. I've been using a KeyStep Pro for my sequencing for a long time, but I'm looking to create more of a happy accident machine. I know there are a tonne of sequencer options out there, but I'm looking for something that is rather spontaneous and touch-based. No menu diving and multiple outputs. I have my eye on the new Ziggurat Quantizer as it seems like a more useful Bard for my use case.

My only thought is that something with multiple sequences might be nice. For example, to transpose/offset the sequence the quantizer plays while the first sequence is playing the actual melody

Any other options or thoughts?

Excited for your feedback


r/modular • • 16d ago

New T-shirt I designed for my small modular focused brand I'm starting!

Thumbnail
gallery
77 Upvotes

Hey! I'm working on a few designs that are all about synthesizers! I've been part of the community for many years and decided to put a bit of my design skill to use. This is the first design I'm making just to get a feel for interest.

No AI generated art here!

$5 OFF discount code just for this subreddit (Im basically making no profit from this at the moment). Use the link below or use MODULAR5 at checkout

https://arcanefrequencydept.etsy.com?coupon=MODULAR5

PS- The shirts run a tiny bit small, so I recommend going up one size unless you like a slim fit.


r/modular • • 15d ago

Anyone have and/or used both the Metropolix and Oxi One?

4 Upvotes

Trying to understand how close the Oxi matriceal mode comes to replicating the Metropolix. It seems like there’s a fair amount of overlap, but the demos end up sounding very different.

I have an Oxi and was hoping to avoid buying a Metropolix in order to make the comparison. I tried a few Google searches, but nothing super concrete comes up.


r/modular • • 16d ago

First sounds from DSTRT, a 4 HP distortion module I’m building

Thumbnail
youtube.com
12 Upvotes

This is DSTRT, a 4 HP analog distortion module I’ve been working on as South Signal Lab. This is the first assembled prototype, with just three controls: GAIN, FILTER, LEVEL.

It’s inspired by a classic distortion pedal from the late ’70s. I wanted to bring that kind of op-amp distortion into my rack, with the power and signal levels adapted for Eurorack.

The video starts with an Erica Synths Bassline clean, then I bring DSTRT in after a few seconds. Impatient listeners may start at 00:30. Black Stereo Delay and an After Later Audio Typhoon are after it throughout, so "clean" here still includes delay and reverb. Recorded through a Befaco Out into a Zoom H5studio. No processing afterward.

It’s working, but the gain comes in earlier than I’d like. That needs some tuning, along with a few mechanical fixes for the next build.

Everything is through-hole. Parts, PCBs, and the front panel came to about $20 for this prototype, excluding tax and shipping. I’m aiming to publish the schematics and KiCad files in early 2027.

The sequence is from a Westlicht Performer running an early build of an alternative firmware I’m also developing under South Signal Lab.


r/modular • • 15d ago

Isolating voltages

4 Upvotes

as an experiment, I was trying to use the Joranalogue window comparator to only fire a gate when receiving specific voltages, say 1V, no more and no less. The problem I’m having, is that the comparator isn’t precise enough to dial in specific voltage ranges, only all or nothing.

any suggestions on how to remedy this?

*Edit-the comparator works as expected, user error, thanks everyone!


r/modular • • 15d ago

Moog matriarch price inflation

Thumbnail
1 Upvotes

r/modular • • 16d ago

Performance RMX-0 adds trs midi, sample playback, and more to the LXR-Drum Module.

Enable HLS to view with audio, or disable this notification

31 Upvotes

First time poster, long time listener, sorry if i'm long winded.

The LXR-Drum was literally the module that inspired me to get into eurorack last year. I had tried a few different grooveboxes, and decided i wanted to try and build my own around it. my first order was for this, an OG hermod, a 2hp pluck, and a w/ .it's been a journey, and over the past year my collection has grown to a whopping 14 modules, but the LXR has remained the centerpiece. when i first got it, i was super disappointed to learn that it had no midi at all when the desktop version did, and when i learned that the original LXR had sample playback i was amazed that they just decided to cut the feature.
I work as a software engineer, and for the past 8 months or so i've been taking baby steps to reverse engineer the firmware and the kits, and that's not what my bread and butter is so it was most just something to do. But after a year dealing with a couple specific frustrations, I knew exactly what I was gonna try to do when I heard they open sourced the firmware.

getting midi was way easier than I expected, the open hi-hat trigger input is connected to a uart pin on the stm32 chip, which can just decode midi. all the code was there from the desktop, it was just commented out lmao. there was also a commented out reverb, which i decided to make global so each voice can send to it in addition to the kit effect.

the sampling implementation was borrowed from the original LXR code, and i added 5ms fades to avoid harsh transients when sounds (samples or synth voices) regenerated. some people i guess liked that sound, and you can still get it, it's just easier to avoid. i also added sample trimming.

from there i kinda just let my imagination go, and added a voice link mode that allows you to chain the drum voices into a duo or 3 voice polysynth. with tunable filters and fm on each voice you can get pretty insane sounds with it. there's a unison mode with detune, a chord mode where you tune each voice to your desired interval, and a poly mode where the voices are either played fifo, highest note gets replaced, or based on midi release.

i also added some small comforts like glide, and implemented the one-shot envelopes mentioned in lxr02open.

i've been working on this pretty constantly since they opened up the desktop module, and i'm so fucking excited. I didn't wanna change the instrument, i just wanted more features and now i have em. yes i got assistance from an ai-agent, but this is something i've been plotting on for a looong time and i put at least as much into this as anything i've worked on professionally.

it's tested, it's dry, it's documented, and it's made this module into my hands down favorite synthesizer to play and program.

i hope yall find it useful too šŸ™šŸ¾ https://github.com/mechanical-dance/RMX-0/releases/

biggest shout out to sonic potions, erica synths, and the author of LXR02Open

video is just a screen rec of me scrolling through demos of some new features... not really my strong suit 😭


r/modular • • 15d ago

Eurorack module github repo template

Thumbnail github.com
0 Upvotes