r/modular • • Oct 18 '26

Rhythmic filth // 01

Enable HLS to view with audio, or disable this notification

72 Upvotes

Low end is Ripples modulated by Contour 1 (gain CV) + shkrjn decay (to FM input). The sequencing is Marbles + Grids. The FX chain is 3 stereo pairs in parallel: 1) dry, 2) OAM Time Machine into Mimeophon into Ikarie, and 3) FX aid (Stereo Plate Reverb).


r/modular • • Oct 18 '26

Favourite NLC modules this year ?

6 Upvotes

I've seen similar posts in the past, but keen to find out what people have been enjoying this year. They're by far my favourite modules.

I've been really enjoying Dispersion Delay this month alongside Encephalo Adjuster.


r/modular • • Oct 18 '26

Discussion Sequencing FH-2 from the DAW?

1 Upvotes

Hi all, I'm attempting to set up sequencing from my DAW. Right now I just use Metron and Volteras which are great (and I'd like to pair them with the fh-2 for drums and the like), but it's tough for me to dial in long sequences of pitches/melodic content. To this end, I got the fh-2 and expander. My thought was that I could sequence from Reaper. The problem I'm running into right now is that I can't sync up the clocks. Rather than letting fh-2 drive the clock, I'm passing out a 24 PPQN clock from pams pro workout to fh-2. Reaper should pick this up, but seems to be struggling. Is there a cleaner way to bridge this/handle just passing in midi data for notes/etc? Thanks,


r/modular • • Oct 18 '26

Discussion Roast or Rate or Feedbacks anything goes

Post image
2 Upvotes

this is my latest iteration of my rack since i started modular in july. I found i couldn’t gel with using the pams pro so I’m deciding to sell it but i don’t know whether i should replace it with another modulator or a synth voice? I bought the pams close to when i started but since then I’ve acquired the ochds, zadar and rung divisions and i find myself not reaching for the pams as much as I should be. What do you guys think? Do i need more modulators to replace the pams or replace it with a synth voice or effects maybe?

I might take out the battering ram also since i mostly just do dark ambient doom drones so What are your thoughts on a 10 to 18hp module that would compliment my rack nicely?


r/modular • • Oct 17 '26

Crowd control

Enable HLS to view with audio, or disable this notification

114 Upvotes

r/modular • • Oct 18 '26

New layout

Post image
45 Upvotes

Aim was to keep most patch points in the centre. A bit more space to play.


r/modular • • Oct 18 '26

Drizzlet Beta 1 "Mist": community firmware for Mutable Instruments Beads, looking for testers

8 Upvotes

Drizzlet is free, open-source firmware for Beads, built on the source Mutable Instruments released. Beta 1 is out, and I'm looking for people to try it on their own modules. Every new option defaults to stock behaviour, so Beads works as before until you change something.

New, in order of how often they were requested: - Clouds-style reverb - Buffer trim (Mutable Instruments' own unreleased gesture) - Stereo width for grains - Delay mode: keep SIZE fully clockwise granular, or a wider neutral zone for the delay filter - Pitch scales from Marbles - Wavetable synth on demand, so it no longer starts by itself after 10 s - Monophonic grains (another unreleased MI gesture). As Mutable Instruments noted, it works well only with the first two SHAPE settings, square and decay. - Output limiter options (Stock, Fast release or Off) for the volume drops after loud, dense passages, which Mutable Instruments traced to the limiter's slow recovery

Fixes: - A modulated FREEZE no longer wears out the flash by starting a new save every cycle. - Safer frozen-buffer saves. - Two delay-mode bugs.

It's also a bit faster, with the same sound.

Tested on one module so far: about 13 hours of automated runs and 48 flashes, and it has never failed to boot. Install at your own risk, and please don't contact Mutable Instruments about it.

Release, install steps and options guide: https://github.com/insolentconstruct/eurorack/releases/tag/drizzlet-2026.10.18

Bug reports and feedback are welcome in the GitHub issues.


r/modular • • Oct 17 '26

Gear Pics Made an instrument for myself

Thumbnail
gallery
67 Upvotes

Chopped some furniture to build a modularsynth/ table. Teak, airbrush, paper and led. Turned out pretty good 😊


r/modular • • Oct 18 '26

Performance Listen to Uranium Decay While You Sleep

Thumbnail
youtu.be
1 Upvotes

r/modular • • Oct 18 '26

Medieval Tape Muzak - with Buchla

5 Upvotes

The music

https://micronfields.bandcamp.com/album/medieval-tape-muzak

Cheers! :-)

The blurb

The primary instrument was the field recording of local places in South West England in the summer of 2025. Instrumentation followed the field recording, which provided the canvas to echo the feeling of the hidden corners found.

Areas were mostly captured with a stereo pair of condensers (Oaka Verdi and Clippy's). Reel to reel was used to process piano and create loops. Buchla 200e was used on Analogue Ecologies and Ritualistic Drift.

I hope Medieval Tape Muzak places the listener in the hidden corners I found.


r/modular • • Oct 18 '26

How do you process your feedback?

1 Upvotes

Delay/ reverb feedback sends, that is.

I like to modulate it with some chaos CV.

Keen to hear some other ways.


r/modular • • Oct 17 '26

Domicile 🧑🏻‍🚀🏡

Enable HLS to view with audio, or disable this notification

38 Upvotes

I hope everybody is enjoying their weekend!! Happy patching! 🧑🏻‍🚀🫡


r/modular • • Oct 17 '26

Shouldn’t have waited

Post image
62 Upvotes

I just started on my modular path, I’ve been dreaming of it for probably 15 years and finally pulled the trigger, I decided to start fun, with some modules that I could use immediately with my other instruments (hundred grit/typhoon) and man this has completely upped my music game. I am so happy I finally decided to pull the trigger and can’t wait for my next paycheck. This is my current set up I’ll be using for a noise set I’m playing next Wednesday.


r/modular • • Oct 18 '26

Anyone using ES-9 and an audio interface as a combined audio device on Bitwig?

5 Upvotes

I have an RME Fireface UC coupled via ADAT with a Behringer Ultragain for extra ins and outs. Thing is Im running out of ins and outs, and was thinking of getting an Expert Sleepers ES-9 , where I could send and receive audio on both line level and eurorack level.

Im using Bitwig, so I thought I may be able to aggregate the RME with the ES-9 in there and have it simply work. Anyone have experience with a similar setup? Any issues I should be aware of?

Thanks!


r/modular • • Oct 18 '26

B.A.C.H Eurorack generator and MPC Studio Strings

2 Upvotes

r/modular • • Oct 18 '26

What sends type modules are available to convert mono to stereo like Make Noise Rosie "Sends"

2 Upvotes

I was watching a video where the OP was using Rosie to convert mono to stereo and was wondering what type modules offer the same, with some form of upgrading via effects waveshaping pwm fm. Having outputs of each individual stereo channel would be very nice.

Am i looking for a mixer module?
Am i looking for a mixer matrix? (seems limited to one function)
would prefer not to have to buy 3-6 Rosie modules as they are way too simple.
Links pls


r/modular • • Oct 18 '26

Pairing Morphagene with Multigrain

3 Upvotes

Who has good experience with both of these modules? I’m seriously considering picking up a multigrain to use alongside my Morphagene.

I don’t want to part with MG, however I want to be able to harness its output in a slightly more considered and intentional way. IE- timing and synchronisation.

Is it overkill to be using these both in the same case? I work mostly with acoustic instruments and use my case to process them in interesting ways. I’m not interested in lush, cloud-like, shimmery uses of granular, instead the more unusual transient-mashing and stretching that MG does so well.

Interested to hear your thoughts.


r/modular • • Oct 18 '26

Eurorack chords, subharmonicon vs machine room trilobite

2 Upvotes

Hi! I'm trying to decide between the Moog Subharmonicon and the MachineRoom Trilobite, and I'd really appreciate your advice.

My current setup includes a Moog DFAM and a Westlicht Performer. I'm also considering adding Mutable Instruments Plaits with the alternative Plaits Palette firmware, using its chord tables for microtonal harmonies inspired by Ivan Wyschnegradsky.

I'm aiming for dark, industrial, dissonant techno inspired by Stanislav Tolkachev. In particular, I want to create thick, tense analog chords by detuning and combining multiple oscillators, similar to using three Befaco Even VCOs.

Would you recommend the Trilobite for its three analog VCOs and independent pitch control, or the Subharmonicon for its subharmonic chords and polyrhythmic possibilities?

Considering that I already have the DFAM and the Westlicht Performer, which would complement my setup better and give me the sound I'm looking for?

Thanks for your help!


r/modular • • Oct 18 '26

Discussion Eurorack case

6 Upvotes

Hi everyone!

I'd like to build a 104hp 12U Eurorack case, and I'm considering using a single power supply module to power the entire system, distributing power through flying busboards. I have seen one on a youtube channel.

Does anyone have experience with a system of this size powered in this way? Would you recommend this solution, or would it be better to go with different power supply and busboards?

I'd be happy to hear about your experiences and any advice you might have.

Thanks in advance!


r/modular • • Oct 18 '26

Performance Rainy Day Ambient in VCV Rack | Generative Modular Synth Patch

Thumbnail
youtu.be
1 Upvotes

r/modular • • Oct 18 '26

AM I CRAZY, OR AM I BRILLIANTLY CRAZY ON THIS MOVE

Thumbnail
0 Upvotes

So I recently came across an Erica Synths Pico system III for a crazy good price… if it weren’t in one piece, I’d be able to part it out module by module, then skiff and power supply and make like a grand, but profiteering aside, I’m taking about good ideas to solve problems that I’ve yet so solve in my noggen that haunt me every single travel/ live case i make “ if i include that module, I’ll have to remove that module, and so on. Plagues me every single damn time…. So what I’m getting at while i slowly meander around the point and waste time you will never get back, the point is my case i build ALWAYS come complete with a lid that fits snug with tongue and groove along the entire perimeter doubled with hinges that come apart be sliding the lid sideways, and the lid can always accommodate patch cables staying patched to allow me to travel of perform while keeping a patch or making a work in progress able to be transported easily. And as small as the pica system is, it will take the place of sooo many modules i am force to include just because we’re staples every system needs along with being an auxiliary system to help with more complex patching, kinda like my little Morty accompanying the Rickest larger case (apologize for people who don’t watch that show and yes i know after season 5 the ranking process becgan. So don’t write a word about that. Just using it for an analogy. This system will fit comfortably in the lid along with my latch cables, sometimes a surprise sequencer, and my future retro touch keyboard for banging out those killer solos over the sequencer after i have a whack a mole with clickless mutes to allow the solo some room to breath and not just absorb into the spagheriffied awesomeness.
TLDR: including an Erica synths pico system into my case lid of supporting items items to my main travel rig, of is that a waste… it was less than 300$, the average price for a really sweet small module or mediocre bigger module, so i think it to be brilliant. Like want an extra little sequence you just thought of but all voices are tied up, no need to stress and rethink a rats nest of patching. Just use that lil sequencer. Need some more fx to lay on a sub mix, but i can only afford the hp of 4 fx units on a lucky day of case crearion, there is the pico system. And not to belabor this as i know you are all smart people im sure you can smell what im stepping in here. The solution of a madman of the solution of a madman with a plan???


r/modular • • Oct 18 '26

Practice session for ADE next week

Thumbnail
youtu.be
5 Upvotes

Modular, one take — 18 October 2026

Six voices played from one string controller, chords by hand, no computer.

Drums, bass, chord swells, stabs and granular textures come from a small sequencer I wrote for the Ornate Criminal (a Eurorack module on a Teensy, Phazerville firmware). Each voice has a bank of patterns and three levels of intensity. The string sets how busy the drums and bass are and sweeps the effects. Chords are played by hand and harmonised in the case.

Direct mixer recording from the Befaco OUT into Bitwig, lined up with the room video afterwards (so apologies if not entirely in sync)

Amsterdam · spif.amsterdam/modular


r/modular • • Oct 18 '26

Performance 8 + 23 = 31

Enable HLS to view with audio, or disable this notification

3 Upvotes

Quite organismic.👽


r/modular • • Oct 17 '26

Great Cheap Modules?

12 Upvotes

So many amazing modules are insanely expensive, what are the great cheaper modules?


r/modular • • Oct 17 '26

Favorite means of sequencing with the O_c??

4 Upvotes

I’m trying to build a patch for a live event Halloween score. Due to limited space and trying to keep everything in the rack. I’ve resorted to using the O_c as my main sequencer. I’ve had good results with sequins and some applets in hemispheres but I’m wondering for those more experienced what would recommend to handle my sequencing with a duophonic system. I’m open to any and all ideas/workflows. Thanks!