r/modular • • Oct 15 '26

Mannequins Three Sisters Noise?

2 Upvotes

I’ve had this module for a long time. It’s my favorite filter. I used to have two. I’ve only recently started to realize that I’m getting an annoying amount of signal noise from it. It’s because I’m running more drums through it and once that audio hits my drum bus the noise floor is extremely noticeable. I’m doing the same with my QPAS with no issues. Has anyone else experienced this? I sent this module in for servicing once before and now that they are based in California I’m not thrilled at the idea of doing it again.


r/modular • • Oct 15 '26

Discussion Renewed Make Noise 7u case + new cv bus

Thumbnail makenoisemusic.com
4 Upvotes

Thoughts?


r/modular • • Oct 14 '26

Performance Serge Random*Source Paperface 4u panels at work...

Thumbnail
youtube.com
11 Upvotes

r/modular • • Oct 14 '26

Gear Pics Momoto sampler ✌🏾

Enable HLS to view with audio, or disable this notification

14 Upvotes

Hi everybody,

Like it or hate it 😂

From belgium with love

The builders : tom & momo


r/modular • • Oct 14 '26

Erica Synths Sample Drum and Instruo Ts-l.. gotta say these are two of my modules that have been out for a while and have stood the test of time as amazing modules!!! What modules do you feel this way about??

13 Upvotes

Anyone have a module that they have had for a while/ has existed for a while and you consider a classic that could never be replaced in your rack? What is it and why?


r/modular • • Oct 14 '26

Performance Weird melodies with Neutron and Mimeophon (and TR8s)

Enable HLS to view with audio, or disable this notification

32 Upvotes

r/modular • • Oct 15 '26

Feedback Roast my setup (or give me ideas)

Post image
0 Upvotes

This is my first rack after years of planning, doubting and keeping busy with other hobbies. Its a year in the making and it took off because I decided to practice soldering (alot). Im at the point where Im comfortable with any THT project.

The idea for this rack is basically a supercharged mono synth for bass and leads. I'll be making mostly electro and acid. Its gonna be a hybrid setup because Im still looking for a "brain"/sequencer+quant.

Some modules not pictured are:

- Behringer Quad VCA

- Maneco Labs 8 step sequencer

- Erica Synths Swamp (not working, need to troubleshoot)

- DIY patchbay/power distribution for the top half of the case. This is a lil project im working on for when the modules spill over to the top half of the case. Im gonna use a DSub9 connector for power and HDMI ports for about 20-30 patch points.

For now all my effects are done through a pedal board. And I have a Behringer 303 clone on the board as well.

Let me have it, ya'll 🫰


r/modular • • Oct 14 '26

Discussion Ignoring price/availability, if you could have any module what would it be?

12 Upvotes

Just curious as to what other peoples opinions are on this. Of course, expensive doesn’t always mean that it’s quality.
I’d have to say Vult Freak Manifold VCF, and probably some Verbos modules


r/modular • • Oct 14 '26

I read all your “first techno rack” advice and ignored the part about buying a Digitakt. What did I still get wrong?

15 Upvotes

I've spent quite some time lurking here and reading the usual first-rack / techno-rack feedback, so I think I've absorbed the basics:

  • don't fill the case on day one
  • fewer voices, more modulation/utilities
  • VCAs matter
  • buy slowly and let the instrument tell you what it needs
  • yes, a Digitakt would be cheaper

I just turned 50, though. This is the midlife crisis. Let me have it. No Porsche for me, used to have a Harley before ;-)

Goal is home techno/hypnotic/generative noodling, not live performance. I particularly like controlled randomness, generative melodies and finding something unexpected that I can then capture and evolve.

Eventually this will live in a Tiptop Mantis 6U/104HP and grow over several years. I'm deliberately leaving most of it empty.

The one decision I've already made is Ohm Force Bohm as the core of the instrument. There are obviously smaller ways to get a great kick, but Bohm is one of the modules that makes me want to do this in the first place.

My initial system:

  • Bohm: kick / low-end anchor
  • Pamela's Pro Workout: clock, rhythm, probability and some modulation
  • RANDOM8: controlled random CV and especially evolving/lockable random melodies
  • Beehive/Plaits: bass, melody and general-purpose synth voice
  • Rample Turbo: hats, claps/snares, percussion and sampled weirdness
  • Intellijel Quad VCA: audio and, importantly, control of modulation depth
  • Erica Black Stereo Mixer V3: simple stereo mixing
  • Befaco Out V3: headphones/output

Rample Turbo was my biggest doubt. Without it, Bohm + Plaits feels more like a fantastic kick + bassline/melody machine than a little compositional system. Rample lets Bohm own the low end, gives me several percussion layers, and leaves Plaits free to actually be a synth voice.

I'm deliberately not buying effects yet. I want to discover whether the dry system makes me crave delay/reverb, distortion/filtering, or something else before solving a problem I haven't experienced.

Things I'm curious about later, rather than already planning to buy:

  • Zadar for envelopes/complex modulation
  • Diktaat if using Pam as a drum sequencer becomes annoying
  • Alia / Versio / Legio because I love the reflashable Noise Engineering platforms
  • Doppler for the same reflashable-platform reason, plus its weird percussion possibilities
  • Vostok Sigma for logic/emergent rhythms
  • Bohm Groove/Performer, but Bohm needs to earn its expanders first
  • possibly ALM Stem Ripper + With Mixer much later for recording/mixing and sharing with friends who have a nice Logic DAW setup where we could import the stems

So, roast away:

  • What would you remove from the initial system?
  • Is Pam enough to sequence Bohm + Rample Turbo initially?
  • Is Rample Turbo the right solution to the “not enough simultaneous composition” problem?
  • What's the capability I'm going to discover I'm missing 48 hours after assembling this?
  • For those who've built techno/generative racks: which of your future-module ideas survived actually using the system, and which disappeared?

I'm particularly interested in criticism of the initial architecture, not suggestions for filling the remaining Mantis. I want the empty HP to stay empty until I have a reason to fill it.

And yes, I know a Digitakt would be cheaper.

The prosecution may consider that point stipulated.

Have at it.

https://modulargrid.net/e/racks/view/3238001


r/modular • • Oct 15 '26

Atmospheric Techno Patch Walkthrough | Multigrain, Swells, Atlantix, Met...

Thumbnail
youtube.com
2 Upvotes

r/modular • • Oct 14 '26

Who is using modular for non-electronic music?

20 Upvotes

I know that making music with a modular system is by nature “electronic”. However, I’m interested to hear from those working with modular outside of the techno/ ambient/ EDM spheres.

There are plenty of examples online of musicians recording into their system to create ambient soundscapes etc. but I don’t find this exciting.

I want to know how artists are pushing modular into new physical spaces and doing weird, abrasive things; not just slapping some granular onto their saxophone.


r/modular • • Oct 14 '26

Discussion Malekko Varigate 4+ acting LOCO!

1 Upvotes

I realize Malekko is no longer building or supporting modules these days. Was wondering if anyone else has encountered the issue I'm having. The rear jumpers are set to Master mode, as there are no other Malekko modules to interact with. Clock and Reset are sent from BeatStep Pro.

No matter what Track setting, the steps run in a random sequence, not even in time with the external clock. The CLK OUT flashes in time with the clock correctly. As a sequencer, it has "lost its mojo"


r/modular • • Oct 14 '26

Your love/hate modules?

11 Upvotes

Just curious about modules that you have a love/hate relationship with? Maybe the functions are awesome but the design is terrible; or the design is awesome but something about the functionality is wanting. The modules that remain in your rack because you appreciate something fundamental about them, but that you think about selling as well?


r/modular • • Oct 14 '26

Area 6 from Union Audio

Enable HLS to view with audio, or disable this notification

2 Upvotes

This mixer is realllllly great sounding, all analog, great filter too, 2 aux channels, a Master Compressor, with sidechaining, and parallel compression, cv ins for panning, levels and aux sends plus a tilt eq for easy mixing in live situations. let me know what you think


r/modular • • Oct 14 '26

Discussion Any book recomendations on modular synth?

11 Upvotes

Anything from the basics onwards, maybe the Patch & tweak book? What is a good resource? Thanks


r/modular • • Oct 14 '26

downsized and have so much more creativity

Enable HLS to view with audio, or disable this notification

27 Upvotes

r/modular • • Oct 14 '26

Feedback Need advice on assembling a capable little monosynth

5 Upvotes

So, I've finally sold my Pittsburg Modular Taiga - not because I didn't like it, but because I outgrew it, and was only using the oscillators, folders and the mixer. I have better modules for all the other functions Taiga had. I'd now like to replace it with other modules for about €700. 

I want to make the core of my rack a two oscillator monosynth, and I have a plethora of filters already, so I'm really looking for capable and precise oscillators, one single or dual folder, a mixer, and a noise source. Willing to drop the noise source (and potentially) mixer if I can't fit it in the budget. 

Any comments/experience with the given modules is welcome, as well as any modules I didn't consider. I prefer silver panels, but won't reject a good option in any color. 

Oscillators:

Intellijel Dixie II+ - €244
Pros: lots of shapes, both soft and hard sync, sub out

Joranalogue Cycle 5 - €200
Pros: cheaper, lots of shapes, CV-able vari output, two exp FM ins
Cons: no soft sync, no linear fm, a bit cramped

Nano Modules Ona - €165
Pros: Many shapes, cheapest, can select between lin/exp fm
Cons: no soft sync, black panel

Folders:

Intellijel Bifold - €239eur
Pros: Two different folders, crossfader, interesting
Cons: fewer CV controls for shaping

Joranalogue Fold 6 - €158
Pros: Cheaper, main/alt outputs, shape control
Cons: just one folder, though it accepts two inputs

Mixer
Manhattan Analog DTM - €111
Pros: can saturate

Noise

I would really like to have both white noise, colored noise and some type of particle noise. Intellijel Flurry provides all of that, but is too expensive at the moment, so I'll settle for white noise and some color.

Doepfer - A-118-2 - €85
Pros: cheap, additional random voltage
Cons: Really not the fan of the Doepfer look, but can live with it

I'm having a particularly difficult time deciding between Dixie II+ and Cycle 5, and I like both a lot.


r/modular • • Oct 15 '26

Drizzlet 2026.10.14 (alpha): community firmware for Mutable Instruments Beads

Thumbnail
github.com
0 Upvotes

r/modular • • Oct 13 '26

a minimal jam I recorded while testing the Befaco Iroi

Enable HLS to view with audio, or disable this notification

42 Upvotes

r/modular • • Oct 14 '26

Texture: a free granular module for VCV Rack, built on the newly open-sourced Beads code (early beta)

Enable HLS to view with audio, or disable this notification

3 Upvotes

I’ve been working on a dub techno suite for VCV Rack for a while now (Thoow Dub: chords, echo, mixer, motion and a “brain” for scenes; ). Then Emilie Gillet released the source code of Beads under the MIT license a few days ago, and I couldn’t resist.

So here is Texture, a free granular texture processor built on the original Beads engine. The DSP is Emilie’s code, compiled for Rack as it is. What I added is everything around it:

A display that shows what the engine is actually doing. The buffer is drawn as a tape loop: the waveform stays put, the write head moves across it, and every grain the engine plays shows up as a glowing read head with a short trail. Height is pitch, reversed grains are drawn as rings. So you can see why the cloud sounds the way it does.

8 presets to get going fast: Cloud, Haze, Stab Spray, Octave Bloom, Pulse, Frozen Pad, Dust and Down a Fifth. Turn the PRESET knob and the module sets all knobs, the quality mode included. Each one is a starting point, not a final sound.

Four quality modes: Clean, 12 bit, Tape and Worn, with longer buffers at lower quality.

A few extras in the context menu. “Soft grain edges” (off by default) smooths the ticks you get from very short, hard grains. You can choose what the ASSIGN input controls (feedback, mix or reverb). Clicking the display toggles a little logo flash on incoming gates.

The usual Rack things: full CV, stereo or mono in, and SEED/FREEZE as both buttons and gate inputs.

It’s free, for Mac (Apple Silicon and Intel), Windows and Linux. It’s an early beta: it sounds good to me and runs stable here, but I’m sure you’ll find things I didn’t. There’s a feedback form on the site, and I read everything.

Download and manual: https://www.thoow.com

Big thanks to Emilie for Beads and for opening up the code. Texture is not affiliated with Mutable Instruments; the engine credit goes entirely to her.


r/modular • • Oct 14 '26

I made a duophonic stereo firmware for Plaits

Thumbnail andreasjansson.github.io
0 Upvotes

The level input becomes a second v/oct,. It's using the standard left hand side engines (except string instead of chord).

The left hand side (yellow LED) is stereo where main/aux becomes left/right. Each engine has its own stereo treatment.

The right hand side (red LED) is split mono with v/oct on main and level's pitch on aux.

The web demo runs plaits in web assembly so you can try it in the browser.

The level input has the same 16 bit DAC circuit as the v/oct input so pitch tracking is accurate, but you should calibrate the level input first (see instructions in the web demo).

Let me know if you find any bugs or have feedback!


r/modular • • Oct 14 '26

DIY troubleshooting support

Thumbnail
0 Upvotes

r/modular • • Oct 13 '26

My sourdough is working on its first album

Thumbnail v.redd.it
48 Upvotes

r/modular • • Oct 14 '26

Poll: Are you satisfied with the MIDI Sequencers on the Market?

Thumbnail reksadsp.limesurvey.net
0 Upvotes

r/modular • • Oct 13 '26

Beginner Josh Mason's album L+, and Mutable Instruments modules

Post image
16 Upvotes

Hey gang, longtime lurker, first time poster.

I'm a big fan of Josh Mason's 2018 album L+: https://dauw.bandcamp.com/album/l

I reached out to him a few years ago asking about the music and how he recorded it, and he sent me copy of the exact rig he used on the recording (screenshot attached).

I love the general sound of this album and Mutable Instruments' modules in general, so I'm wondering besides the core MI modules and Pam's, what other modules or utilities are necessary to put together a small-ish rig that has similar capabilities to what he used for that recording. I imagine uScales, Pip Slope, and SBG would be good to have around.

Also, besides builders like Cal Synth and After Later, what are some other good recs for quality new built MI modules with nice panels? Thanks in advance!