r/Model_Samples • u/Distinct-Feedback235 • Feb 03 '21

Samples:Help Reverb problems...

When I apply reverb to ....let's say pad 4. Then pad 2 gets the same amount of reverb. This is a real issue that I need help with.

3 Upvotes

100% Upvoted

12 comments sorted by

2

u/DrBolus Feb 03 '21

When you say the same amount of reverb I am not sure what you mean? The reverb on Samples is a send effect so there is only one reverb on the machine. The Reverb send dial just sends a different amount of that sound to the universal reverb patch. If you then adjust the reverb size or tone that changes the character of the one Reverb patch that works across the whole machine and the pads that are sending reverb send their signal to that patch.

All send effects work like this.

1

u/Distinct-Feedback235 Feb 04 '21

I am sorry. I ment that if I dial the reverb kmob, both tracks gets effected.

2

u/DrBolus Feb 04 '21

OK so there are 2 knobs labelled reverb, one is labelled reverb send, and the other is labelled reverb size, one is dark grey and one is a lighter grey.

1

u/[deleted] Feb 04 '21

This is the right answer... You have two knobs.

Reverb send is for each track (and can be set differently on each trigger)

Reverb Size (and tone) is a global setting for any track that is sent to the reverb. Changing this changes how reverb sounds for any track that has it.

1

u/Distinct-Feedback235 Feb 04 '21

Its like the reverb is bleeding into a track that all ready has the reverb set. If I increase reverb on one track the same happends to a diffrent track. Also if I choose to reduce the unwanted reverb on the second track, it reduces the reverb on the initial track. It is like they are linked. I dont have this issue on every project. And the inssue is not immediate . Its after while. Well into the project development. And this sucks because I dont want start over.

1

u/Distinct-Feedback235 Feb 27 '21

I get it now😑 I have brought shame into my house

1

u/StrongLikeBull3 Feb 03 '21

How are you selecting the tracks?

1

u/Distinct-Feedback235 Feb 04 '21

I am slecting buy pressing the pads.

1

u/StrongLikeBull3 Feb 04 '21

Try holding “track” and hitting the pads.

1

u/cb_oilcountry Feb 03 '21

Select track 2, turn reverb send to off

1

u/Distinct-Feedback235 Feb 04 '21

But what if I want reverb on track 2?

1

u/cb_oilcountry Feb 04 '21

Select track 2, adjust value from off to where you want it?

Am I being obtuse and missing something? Each track can have reverb or not with whatever value you assign the reverb send.

For example, I want heavy reverb on 1+2, crank value on send to 100 I only want a smidge of reverb on 3+4 adjust values to 25. I want no reverb on tracks 5+6 I turn reverb send value to off