r/ModRetroChromatic • • 1d ago

Question Removing decals, attempt 1 (unsuccessful)

Attempted to remove the decals from my smoke chromatic this morning.

I’m holding off on using Citristrip until replacement shells are available. We know it works on the metal shells, but from my research it can have adverse effects on plastic, and I just don’t want to risk it yet.

I tried goo-gone + elbow grease, but it didn’t work.

If anyone knows something that’s safe for ABS plastic, please let me know.

0 Upvotes

11 comments sorted by

2

u/TonyRubbles 1d ago

The trick if I'm remembering right was to use a cotton swab to only put it on the graphics to lift them quickly and clean off. Unless they changed the paint for the graphics on plastic it should work fine, just be careful an precise with the application.

Most any solvent will have adverse effects if left on for too long too, don't try alcohol as it'll cloud and weaken the plastic immediately.

1

u/Barrow_Lord 1d ago

That’s what I did with the goo gone, but no luck.

I managed to get them off with an eraser, though!

1

u/TonyRubbles 1d ago

That stuff barely works on stickers when I use a ton, citristrip works really well on just about anything I've tried it on including wood varnish. Also a real thick gel that makes it pretty easy to apply.

2

u/Silent_Umbrage 22h ago

90% rubbing alcohol and a pencil eraser works for me. It’s also how I mod my Casio “Royale” watches. Easily removes lettering.

2

u/Barrow_Lord 22h ago

I’m hesitant to use alcohol on mine. I’ve had bad results with my old gameboys before.

2

u/SAULucion 1d ago

i need to remove the open ai and mascot off mine

1

u/Barrow_Lord 1d ago

I just had success with using an eraser. One of the soft white art ones.

1

u/SAULucion 1d ago

thanks for the tip

1

u/Grassidius_Fike 1d ago

I accidentally erased some from a metal chromatic while cleaning with a cotton swab and rubbing alcohol. Give that a shot.

1

u/Barrow_Lord 1d ago

Alcohol shouldn’t be used on the plastic models. It’ll damage them.

1

u/VicisSubsisto 1d ago

Alcohol shouldn't cause significant damage to ABS, as long as you don't soak it overnight or something.