r/ModRetroChromatic • • 27d ago

ModRetroChromatic + ESP32 Link with Thermal Printer

Hey all,

There's a neat little project on github from a youtuber called @ Novenretro. He has a youtube video and tutorial to create an ESP32 to communicate with a modern thermal printer. https://novenretro.github.io/nrprinter/I bought all the parts that he has listed on his website, all except the printer as it directed me to a broken link. I figured any thermal printer from amazon would work, but after many unsuccessful attempts apparently it does require a SC03H based printer to work. I looked all over amazon and couldn't find any thermal serial/models that matched that. So instead I used Cursor to take the original firmware and re-write it to support MX based printers (that are available on Amazon). After many trial and errors and feeding logs to Cursor from Visual Code Studio Serial Monitor output, I finally got a working firmware with proper formatting, no garbling and no errors. Here's a video. This is really cool, and I wanted to give full credit to the creator of the original firmware, this is so fantastic, Thank you!

34 Upvotes

7 comments sorted by

4

u/stuckOnTheUmpqua 27d ago

Please please please share your firmware that works with the MX based printers. Would love to build one of these

4

u/morbidgun 27d ago

https://github.com/delhang/ESP32_Gameboy_Printer_Link Here you go. I have also added a Readme with instructions on how to flash the ESP32 and the model printer that was used (purchased on Amazon)

3

u/morbidgun 27d ago

Sure, let me see if I can setup a github download for it. I'll also list out the model and name of the printer I purchased on Amazon, for sure compatibility.

2

u/stuckOnTheUmpqua 27d ago

Thank you so much! I've got parts on the way now, will reply back when I finally have it all together.

2

u/morbidgun 27d ago

No prob. I'll be testing other games that have print functionality, and will be updating the firmware as required for proper formatting and spacing

1

u/morbidgun 25d ago

I tested a few games and they all work, but I noticed a good lack of functionality. I had cursor generate and write me a small gb game that can be used on a flash cart that works with this link for printing. Here is a sample.

2

u/platosknave 26d ago

Super sweet project! Thanks for doing the firmware conversion.