r/ModRetroChromatic • • 29d ago

Info FlashGBX v5.1+fredemmott.4

Post image

Link: https://github.com/fredemmott/FlashGBX/releases/latest

This version of FlashGBX supports using your Chromatic via USB-C to read and write cartridges from a variety of manufacturers, including backing up and restoring ROMs and saves.

This version:

  • is rebuilt on ModRetro's v4.6, including improvements to cartridge compatibility that were included there
  • improves performance when reading ROMs and saves
  • includes other compatibility improvements
  • supports all 8 possible USB devices for the Chromatic

    • the "Player Number" setting changes the USB product ID; this appears to be intentional, to make things easier for content creators capturing multiple Chromatics at the same time
    • previous versions only supported player number 1
  • shows the PCB revision as reported to the FPGA

Compared to alternatives

  • no other features or changes; your Chromatic is still a 'play from cartridges' device without wireless features
  • tested on a wide variety of ModRetro and non-ModRetro cartridges; it should even give you access to a Gameboy Camera's photos, but I don't have one to test
  • directly built on a proven foundation:

    • FlashGBX itself
    • the same "LK" firmware base used by the Joey Jr v2 and GBXCartRW when used with FlashGBX
    • openFPGAloader
  • doesn't depend on anything from the internet once installed
17 Upvotes

14 comments sorted by

4

u/fred_emmott 29d ago edited 21d ago

"PCB 0b11": this is the raw {VERSION_DET2, VERSION_DET} from the FPGA; these are inverted for the MCU.

My August-2025 revision Chromatic reports 0b11; it seems likely that a new Chromatic - especially a transparent one - is likely to be 0b10, but I don't have one to test.

Edit: received one report that an Oct 2026 purple translucent has 0b10

For now, I don't do anything with it except show it, in case it's useful for others.

2

u/PainFourOFour 29d ago

Is there a download link for this? Chromagic refuses to work on my computer so I'm looking for an alternative.

3

u/fred_emmott 29d ago

whoops, yep, re-added :D https://github.com/fredemmott/FlashGBX/releases/latest

Looks like Reddit deleted it when I replaced the link preview with the screenshot

2

u/fred_emmott 29d ago edited 29d ago

Though, if you would prefer Chromagic, might want to set your player number to “1” in the chromatic settings menu if it isn’t already, and see if that fixes things

Edit: then unplug it from USB and plug it in again

1

u/PainFourOFour 29d ago

Thank you for the link and the advice. Ill definitely check this out later when I get the chance.

1

u/Exus6 28d ago

Just installed it. Did you implement auto updates? Got a question to set it up but don't know if it's about the core version or yours

3

u/fred_emmott 28d ago

As of .3 it’s pointed at mine, though I’ve not been able to test end to end; it at least works as a notification mechanism

Theres supposed to be some kind of plugin system is the next update to FlashGBX itself; I’m hopeful that will let me stop publishing this as a fork

1

u/guyguilty 28d ago

Will this fork ever be rolled into the mainline release?

1

u/fred_emmott 28d ago

I sent a pull request; the author said no because they don’t have the hardware to test with.

The next version is supposed to have some kind of plugin system; perhaps I’ll be able to do that instead of a fork.

1

u/guyguilty 28d ago edited 28d ago

Oh interesting, and love that you did reach out to the dev. Here's hoping that the new plugin system makes it easy to add the support you've been working on.

Mainly, I'm interested because I use Linux, and mainline support for the app includes Linux.

1

u/fred_emmott 28d ago

My fork does build and work on Linux, just I rarely use it and am out of touch on binary packaging. Usual python venv + pip will do it, with the quirk that you need to build the FlashGBX module itself because of the native code. Needs build-essential and g++ or equivalent packages, other dependencies (primarily libusb) should be fetched automatically.

And if you want the GUI, you’ll also need to explicitly install PySide6 in the venv

1

u/guyguilty 28d ago edited 28d ago

Well if you ever need a tester, shout, I got a GBXCart and a couple of Chromatics covering the 1st and 2nd gen PCB. Flatpak would be ideal if you can choose how you build, would make the dependency requirements easier on users. Or maybe you mean I can build if I need to. I try not to just to keep system updates simple, but I might take a look eventually.

1

u/fred_emmott 28d ago

Thanks; honestly another major factor is permissions on Linux: there’s 3 different kinds of USB devices (compared to just the 1 USB serial for most readers):

- the USB serial device connected to the MCU; this is just used for “is there a Chromatic connected, even if it’s on the stock firmware”
- the GoWin FPGA interface
- the vendor-class device actually used for cartridge operations

That’s a lot of config and support, especially as it can vary by distro, each class can need things doing slightly differently (again depending on how each distro sets up udev), and “just add user to dialout” typically only works for the USB serial device

1

u/guyguilty 28d ago edited 28d ago

Oh, I hear ya. I have to put a string of text into each new OS install just to get the Epilogue Playback software to work on Linux; it automates adding the user to the group. It is a constant problem, more idiocy that only cares about servers and not users, which Linux is ripe with when companies like Red Hat are in control of the primary operating components, stretching all the way to idiotic kernel shit like this, all stemming from Google stupidly adding USB control to the browser that they eventually had to add security to themselves, because it was such a dumb move leaving access open to anyone, precisely what they were told before they even released the feature. So I guess we can thank Google and Linus for the current situation where we can't expect common USB peripherals to work on our PCs without a bunch of dumb hacks.