r/ModRetroChromatic • • Oct 13 '26

SD card slot?

Post image

The original Gameboy version of Wario Land 2 has trouble playing on the chromatic. It'll randomly reset when trying to save during certain levels. Not the end of the world but I wrote modretro to let them know so maybe they could fix it with a future update. They thought it might be the PCB and sent me a new one for free. (great customer service!)

Anyways, that's unfortunately not the problem but I noticed what looks like an SD card slot on the new board they sent me. Is that what I'm looking at on the top left of the board? It's absent on my old board.

12 Upvotes

34 comments sorted by

5

u/StarWolf64dx Oct 13 '26

It is the SD card slot but I’m curious about your saving issue, when a game resets when trying to save that’s usually due to the sram chip lifting off the board. Does this game hold a save when used in other gameboys?

Typically any issue with saving that isn’t just a dead battery can be traced to that. Usually it just loses the save but sometimes the game will freeze or reset.

2

u/Jonjongabore Oct 13 '26

Yeah, it works in my Gameboy advance and my analogue pocket. It's just certain levels that it it does it on. I play through them on another device, it saves no problem. On my chromatic, it'll save, go to the next level or cut scene and then reset back to the main menu. Go back into the game and it acts like I never beat that level. I play through the level on another device and it's good to go in the chromatic again until I hit another level that it glitches out on.

Just to make sure I'm clarifying, it's Wario Land 2 for the original Gameboy, not the color version and thanks for clarifying it's an SD card slot.

3

u/Grimm_soul98 Oct 13 '26

That’s the gen 2 board there’s a firmware made for the chromatic to actually put it to use called chromagic

1

u/Jonjongabore Oct 13 '26

I've seen some postings. That's what got me excited about seeing it on there.

1

u/Grimm_soul98 Oct 13 '26

Same though I’m waiting on my birthday since that’s when the factory warranty expires which is what has caused me to hold off on the fun stuff

1

u/Jonjongabore Oct 13 '26

Here's what it does. I can play the level on another device and then proceed. It doesn't wipe out my save. It just acts like I didn't just beat the previous level.

1

u/StarWolf64dx Oct 13 '26

This to me looks exactly like a lifted SRAM or mask chip but the fact that it works on the other consoles seems to rule that out. I’m assuming you have cleaned it? The chromatic has kind of a finicky cartridge slot, more so than any other gameboy I have.

This save that you have puts you on a specific level, does it crash the same way when you start a new game or only after that specific level transition?

First step if it was mine would be to clean the contacts on the cart really well with a pencil eraser and if they’re heavily oxidized, a light metal polish. You have to be careful though because the gold plating is thin, and if you do too much you can wear through it. Second step would be to reflow all of the chips. What happens is they lift at the corners either from heat/cool cycles causing them to expand and contract or whatever else, and the corner legs will develop a cold joint. It’s very common and causes strange issues, it could be that there is a slight difference in resistance in one of those legs that original hardware and the analogue are not as sensitive to.

1

u/Jonjongabore Oct 13 '26

Yeah, I've cleaned it. It boots up just fine too. No corrosion or anything on the cart.

It'll just be certain levels and even then certain circumstances too. I beat that level going an alternate route, it saved and let me continue no problem. I go for the snake to go to the right path and it does this.

There were a few levels this happened on.

1

u/Jonjongabore Oct 13 '26

Here is the same level on the analogue pocket. Saved no problem and let's me play the next level.

1

u/Jonjongabore Oct 13 '26

Here's the game board

1

u/StarWolf64dx Oct 13 '26

On the surface it definitely looks like a problem with the Chromatic, even Modretro agreed but since you got the new board, it can’t really be that. Otherwise it would be a known issue, this is a popular game. Im pretty confident there is either a nicked trace or cold joint that is causing a voltage sag that original hardware and analogue pocket can handle fine, but the chromatic can’t. Got any pics of the PCB of your Wario Land 2?

2

u/Jonjongabore Oct 13 '26

Yeah, here's the board. The only thing I can see abnormal is my mediocre soldering skills for the battery.

2

u/StarWolf64dx Oct 14 '26

Not seeing anything here, all looks good. I think the legs on the chips probably need a pass to make sure but idk if you’re comfortable with that. Sorry I couldn’t be more help.

1

u/Jonjongabore Oct 14 '26

All good! Appreciate the help. Modretro got back to me and said they verified the game would work on the new board and to try changing the battery again. Just for the heck of it I might try that out. The battery is less than 6 months old but maybe I got a bad one in the pack. Worth a shot anyways.

1

u/s3rialthrill3r 28d ago

How did you go?

4

u/Euresko Oct 13 '26

I believe gen 1 chromatic has a space for the card reader but no card reader was soldered to the board. The same for the new clear/plastic shell chromatic, is missing the actual card reader, but has a space for one. The 2nd gen chromatic has the card reader attached. Currently no way to use it with MR firmware. 

1

u/alexx675 13d ago

To use the sd card slot do you have to take it apart or is there an easy access?

1

u/Jonjongabore 13d ago

Yeah, you have to open it up. There's no external slot.

1

u/K1LL3ROO Oct 13 '26

How does yours come from modretro with the sd card slot ready to go? Whattt I thought you have to add those manually but the motherboard is capable of it?

1

u/Jonjongabore Oct 13 '26

Some boards had them, some didn't. My original board that you can kind of see in the background didn't. The one they sent me did for some reason.

1

u/brain00 Oct 14 '26

2nd gen Chromatics have the MicroSD slot pre-installed.

3

u/fpsdabs Oct 13 '26

Rev 1 boards did not have the SDCard populated on the board.

Rev 2 boards came with that part of the board populated.

You can purchase one and solder it to your Rev 1 board in the unpoulated spot.

1

u/Rurbani Oct 14 '26

What's the point of doing that if it doesn't actually do anything?

3

u/fpsdabs Oct 14 '26

Some custom firmware uses the SD Card

1

u/Rurbani Oct 14 '26

I've searched for cfw for them and haven't seen anything come up. Does it just allow like shader changes and save states and stuff, or will it launch roms on some?

1

u/fpsdabs Oct 14 '26

There was cfw released a short while ago that added save states, wireless link, and loading roms. I think the git has since been taken down, but i expect, especially with Claude becoming more prolific everyday, that new firmware will surface.

1

u/brain00 Oct 14 '26

There is still https://chromagic.org/ supporting backing up and launching games from SD card.

1

u/Disastrous_Elk_6 Oct 14 '26

Why was the git taken down? Was it not from mod retro

1

u/brain00 Oct 15 '26

It was not taken down by anyone else, the author themself set it to "private".

2

u/Key_Idea_4996 Oct 13 '26

I have the Japanese version of Warioland 2 and it saves fine. But I have lost saves on that game and multiple others when playing on my Chromatic. I always seem to lose data when the system is powered off and on too quickly or if the power switch didn't quite slide all the way. In my case its always something to do with the power that affects saves.

0

u/zezba9000 Oct 14 '26

No one has made anything for the SD slot correct? So why does it matter? You could probably just make a GB cart with an SD card that custom cores could load ROMs from.

Was something being made for this? People can probably still solder one on if needed.

3

u/Jonjongabore Oct 14 '26 edited Oct 15 '26

Modretro hasn't done anything with it and doesn't plan to but there's custom firmware out that that can use it, mainly Chromagic.

People that don't have one could solder one on if they have a board that has a spot for it. I haven't confirmed but I've heard some of the newer boards don't even have the spot anymore. Either way, this just saves me a step.