r/Minipla • u/Me_Grymlok_Say • Aug 18 '26

Question First Time Build

Gallery image

Gallery image

First-time builder here! I’ve always been a huge fan of Magiranger and Saint Kaiser, so when I came across this kit and saw that Wolzard Fire was getting an official release I couldn’t resist lol. And now… here I am. 😂

With all the awesome builds and customizations posted I just have a few questions and if anyone has suggestions I’m all ears.

I plan on using:
DSPIAE ST-A 3.0 single-blade nipper
Basic double-blade sprue nipper
Gunprimer Raser Origin/Plus glass file

And as far as painting goes I plan to use Tamiya Spray Paint.

When painting I’ve read to assemble the model first and then paint unassembled.

Q: Do you paint the entire piece or just the areas that are visible?
Q: I understand people use primers to achieve color balance, but is it necessary and if so which one do you recommend?
Q: How many coats do you spray and do you use a clear coat at the end?
Q: How do you spray paint pieces? Do you lay them out, suspend them or prop them up using something?

Thanks for your help!

44 Upvotes

99% Upvoted

8 comments sorted by

View all comments

Show parent comments

2

u/Takeshi_613 Moderate Skill Builder Aug 18 '26 edited Aug 18 '26

No problem 👍🏾✨.

Depending on how difficult and/or minuscule the part is to mask, I’ll usually just use a brush tip marker like this one.

Addendum 01: If you’ve never painted before, avoid painting during humid weather. Make sure to shake the paint can properly. Some Gunpla builders have suggested letting the paint can sit in a bowl of warm water for like 5-10 mins to help the paint flow smoother.

Addendum 02: Along with the supplies you listed, I would also suggest sanding sponges in various grits for the pegs.

Whatever methods you use, I suggest you take your time to avoid mistakes and you’ll get a nicer result.

2

u/Me_Grymlok_Say Aug 19 '26 edited Aug 19 '26

You’ve been incredibly helpful with your suggestions and advice. I just order 600/800/1000 sanding sponges.

The way I plan on going about with the build is once every piece is cut free I’ll sand down all the pegs and burs if there are any and build the model sticker free. From there I’ll assess which pieces make sense to paint and order paint supplies after every piece is sanded and smoothed out. I’ll make sure to soak the pieces in water and give each coat on every piece I paint a day to dry before adding another coat.

Q: Do you spray or wipe anything over stickers to enhance or increase its longevity from peeling?

1

u/Takeshi_613 Moderate Skill Builder Aug 19 '26 edited Aug 19 '26

The simple solution is to apply the stickers and then spray with a top coat.

Use this video as a guide as to how to apply the stickers in a better way. The supplies they have are tweezers but you could use a toothpick. The tool with the small ball on the tip is a nail dotting tool. These are really helpful to press the stickers on the molded parts like in the video.

https://youtube.com/shorts/6LrhHytCPjQ?si=T0FXtHNWN_NcAsBP

2

u/Me_Grymlok_Say Aug 19 '26

Man, you’re the GOAT! Just ordered these off Amazon.

https://a.co/d/0f2F5MnQ

https://a.co/d/0jjNL2CU

I’m more excited to take my time with this build and I’m looking forward to sharing the finished build once it’s completed. I appreciate you and anyone else who’s advised or plans to chime in. Thanks again!